At startup, I get to the login screen, but the screen is dead, there is no response to any finger taps.

Similar Questions

• I downloaded from my Canon camera forever... Now, once I get to the window that says download, else nothing happens. Any ideas?

  I downloaded my pictures from my Canon camera forever.  Tonite, however, when I attached the camera to the tower and the Tower on the camera, it will not upload my pictures.  Any suggestions?

  Hello

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Download pictures from your digital camera
  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/download-pictures-from-digital-camera

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• At startup I get an "installation status.msi' but the application is not in my computer. Latest resonses do not help

  message says:

  Status

  The feature you are trying to use is on a network unavailable resource.

  Then message says:

  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

  Then message says:

  Use source

  C:\users\HAROLD~1\AppData\Local\Temp\7zSIA68\Setup\Status\

  Then message says:

  Could not find an installation package for the product status.

  Ttry the installation again using a copy valid of the installation package "status.msi".

  Hi Harold,.

  (1) during how long have you had this problem?

  (2) what happens after response are you referring? Please provide the link if you are referring to any position

  (3) remember you to make changes prior to this problem?

  
  Method 1: activate the boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
   

  Method 2:

  Run Disk Cleanup to delete temporary files

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• I have an iPod that is a former with 4.2.1 version.  I would like to read my Audible books and get somehow the new version on this unit.  Anyone have any suggestions.

  I have an iPod touch model MB528LL with OS 4.2.1 (8C148).  I wanted to transfer my books sound and other apps on it and cannot get to work.  I get the error message.  Please tell me how to solve the problem.

  Lisa

  Since this is an older model, you cannot update beyond iOS 4.2.1.

  What does the error say?

• Ghostery Tracker shows on my pages on the right and gets in the way. Is there a way to make it invisible

  The purple ghostery thing always shows on the right side of the page and it is very annoying because it delays my time. Is there a way to hide this?

  Go in Modules > Extensions > Ghostery > Options > Advanced tab OR click on the Ghostery icon and choose Options

  You can set (don't forget to click 'Save' after changing the settings):

  • the bubble to appear in one of the 4 corners
  • the duration of the bubble, or
  • does not display the bubble while unchecking this item.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Hey I have windows 7 and a new coumputer. so when I got home I tried to download java and there is a dll error 1723 but its downloaded... but it won't let me get on the game make java needs although it is downloaded any idea? __

  idk what is happening on any idea?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  I suggest you to follow these steps and check if it works because what this problem could occur if conflicts of software or compatibility issue.
  
  You will need to perform the compatibility check of software for the program installed on windows 7 on your computer.

   

  For this you need to follow the link below.

   

  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Now, try to install the latest Java program on your computer and check for the issue because the java installed on the computer is incompatible with windows, I suggest you download and install the latest version.

  Follow this link provided below to install the latest java program.

  http://download.Java.NET/jdk6/

  Restart your computer and search for the issue.

   

  Thank you, and in what concerns:

  Aito - Microsoft technical support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Im having trouble woth firefozx on 10 black screeen win if you get that much im sorry but I wanted to know there is

  I just wanted to know ypu does not work with windows 10

  Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More information: the problems of Firefox in Mode without failure.

  With completely closed Firefox, you can hold the SHIFT key when you start Firefox.

  A small dialog box should appear. Click on 'Start mode safe' (do not Reset).

  Any difference?

  If Firefox is visible, go ahead and disable the use of Firefox hardware acceleration as a workaround for incompatibility of graphics software possible driver card.

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This will indeed be the next time you go out and you launch Firefox upward.

• After the latest vacuum/Virgin login screen

  Hello

  Due to, I had to update my last Skype version, now I get empty/Blank login screen.

  This is the reason that I blocked Skype to do the automatic update because I had the similar problem in the past (after the update of Skype's empty login screen).

  I tried all the advice from this link: https://support.skype.com/en/faq/FA12233/what-should-i-do-if-i-get-a-blank-blue-screen-when-i-try-si...

  No progress.

  It seems that I'll have to find an alternative to Skype.

  Or maybe somebody support has something.

  I have W7 Pro 64-bit

  Thank you

  Edin

  Hello

  I have IE11 with all updates.

  I managed to solve the problem with the creation of shortcut to Skype sign in the window.

  I don't know why, did not work for me for the first time, but it works now.

  Courious just, why some of us have this problem after the upgrade.

  I installed the update even on the phone my wife with W7 and it worked without problem.

  Thanks for the support

  Edin

• Lost password: I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working

  I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working. I can't get past this login screen. I have seen a lot of messages that say to insert the disc of vista and re - install. I tried to do, and nothing happened when I put the disc.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• How to remove or delete the blue login screen saver

  f you leave the computer for a few minutes, you get a blue login screen. I don't like, I don't need and I don't want that!

  Clear the check box, my bad that screenshot was for another poster, of Yes

  How long did take to enter the mode 'sleep'? or did - he go into a hybrid sleep / hibernation mode?

  

• Qosmio X 500-Windows 7 stuck at login screen

  Machine: Qosmio x 500 - 10U
  OS: Windows 7 Home Premium OA

  Start-up and installation worked the first round. I then did the following partitions:

  C: Windows (original system partition)
  D: data (here I put all my work files)
  F: executable (here are all binary executables that I use)

  Then I have some files from C:\Programs F:\Programs.

  Everything worked well.

  Then I decided to change F: E: (for executable files) for this that I had to move (by default the system original) E:DVD to a new letter and skillful. I chose O:DVD (for "optical") and themselves E: F:.

  Then I rebooted.

  Now, the system boots all the way to the login screen, except that there is no choice of the user. Windows itself has obviously begun because of other functions such as the "Shutdown" and "Restart" buttons doesn't work. But no user or boxes icons to select a user and a password.

  When I boot from a disk UBUNTO DVD player also works and I can always get hold of all my data on different partitions. I can't get windows itslef to connect.

  I have a file recovery hard disk but no optical drive because he kept saying that he didn't create the recovery disk.

  I think I need to fix a few indications of disk in the windows registry file. Unfortunately the utility 'regedit' does not work with UBUNTO.

  Any ideas?

  Hello

  That means login screen, you can choose different users, is it good?
  If so, it would be interesting to know that users connect after Windows starts. Check it!

  To be honest, it's a bit complicated and I don t understand why you did this procedure. In my opinion, that messed with the registry of Windows or other important files and the only option would be to reinstall Windows, I think.

  > I have a file recovery hard disk but no optical drive because he kept saying that he didn't create the recovery disk.
  You get this error message, exactly? Maybe the creator of recovery disc can t find files more why you didn't create the disk before?

  Now, you could try the recovery of HARD drive option. This is your last chance to get back to factory settings and maybe it works

• Dell SonicWALL NetExtender weird login screen

  I installed the version 7.5.215 and 7.5.225 get a weird login screen. I have uninstalled several times and in different windows on laptop win7Pro profiles. Get this weird login screen. The clues how get rid of?

  

  I'll try an older version to see if it helps. Enjoy clues.

  Thanks, Jose

  This forum is dedicated to email security product.

  Please post your queries in the forum network security for the net Extender problems.

  Here is the link for the forum on safety network-> here

• 8.1 strange to win Red login screen

  What happened after I removed a trogan, hack an Explorer and advertising software with windows defender. I now get a red login screen it looks like wingdings fonts. ???

  Thank you for your help. The computer would not start in safe mode. HP sent me the recovery kit

  and he fixed the laptop. I think it was mostly a windows problem that was caused when the next boy

  door tried to help me by downloading windows 8.1 and it was a virus, parody, the Web site and

  not a HP or Windows official site. The boy owes me a free additional yard work now and is not

  touch my computer again.

• Cannot get into the BIOS on my Sat A30

  Hi all

  I have problems to enter the BIOS. I heard when I want to get into the BIOS I have to press the ESC key when Toshiba logo is shown in the startup.

  But nothing happens!

  Could someone help me?

  Sammy23

  Hi Sammy23
  That is right. It's actually the ESC you press. But there is more to know. During the time where appears the Toshiba logo, that represents about 1.5 seconds or so machine "listens" for the ESC at the beginning.
  Means that you have to be quick like a cat to press ESC. I usually press ESC several times all the way to the market (until the Toshiba Logo is displayed). Try this. Another way to get into the BIOS uses Toshiba HWSetup (looks like a key any) in the in the Windows Control Panel. You can access almost all the parameters of the BIOS from there.

  BR

  Tom

• Re: Satellite C850D - impossible to get into the BIOS

  I'm unable to access the BIOS on this machine. I tried (a number of times) by pressing the FN and F2 and FN and F12 keys while the Toshiba logo is displayed. Unlike the Satellite A500, I have, no prompt for keys F2 or F12 doesn't appear at the bottom of the screen showing the Toshiba logo.

  I tried F2 and F12 keys without the FN key, but still no result.

  I need to be able to boot from the CD drive, but cannot get the BIOS to add this record to the boot sequence.

  Help pls.

  Rod.

  If you use Win8 you must make full stop at first. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After the full stop restart your machine and press F12 to get into the boot menu. There, you can choose which device can be used as first boot device.