At startup, Qosmio G30 begins on external screen

Similar Questions

• Qosmio G30 - interference monitor external when plugged to AC

  Hello

  With the AC adapter is plugged in, I get severe interference on my external monitor (samsung Syncmaster 226bw). As soon as I remove the adapter, it disappears.

  The strange thing is my colleague here has the same exact configuration in the next office and have no problem at all. only difference is that it is Linux while I'm still on XP

  I tried monitor different cables, switched adaptors CA / CC with my colleague, but nothing is.

  Any suggestions or ideas you may have will be appreciated.

  Thank you

  It doesn't matter weather, you have installed the operating system Linux or Windows.
  Maybe you could try to use to your laptop or monitor taking unique ompletely.

  Another thing is, check if your colleague's cell phone behaves like yours on your site to the monitor.

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• Qosmio G30 - black screen on external monitor

  Qosmio G30 (PQG32E) under Vista Home Premium, driver NVIDIA GeForce Go 7600, 7.15.10.9813

  I can't get a picture on a monitor external (I tried two different monitors). More precisely:

  "Windows Mobility Center" will recognize that a monitor is connected
  "NVIDIA Control Panel - Display Change Configuration" will recognize the external monitor ('Select poster that you want to use' shows 'Display of the laptop + Sony SDM-HS73', which is the monitor plugged in ext)
  but no matter what configuration I try using Fn + F5 or change of display Configuration, I can't do anything but a black (backlight) display on the external monitor.

  The monitor is receiving a video signal correctly: when he is off in laptop only the setting Fn + F5, it displays a warning 'no signal', but when turned on again I just get black.

  I tried to change the resolution for the external monitor settings. They exactly match the native resolution of the monitor. Still nothing.
  I tried 'Clone' and 'Dual View' mode.
  Tried various different orders to turn on the computer laptop and monitor, Plug and unplug the device, etc.

  Having installed the latest driver for the Toshiba (see above) site. Have NOT tried to install any other driver from NVIDIA site, as she warns to use Toshiba - but that's worth a try?

  The clean laptop screen and all other aspects of the video are very good.

  It worked ok in the past (I think that before I did the upgrade to Vista when it was still on XP).
  Should I just wait for another update of Toshiba driver and maybe Vista SP1?

  I really hope this isn't a hardware problem, because the monitor is recognized etc...

  Jonathan

  What port you used?
  The (analog) external monitor port or the output port D-video?

  View as far as I know that if you used the external monitor (analog) port, then you should choose analog in the nVidia-> current view

  Then, you can use the FN + F5 key to switch between the two views.

• Qosmio G30-204 - design of brick at startup

  Hi people I have a Qosmio G30-204.

  On start its got this design a little brick behind the logo and then Qosmio where writing starts to come, outgoing agent priming, etc., instead of the black screen, its black and yellow lines most of them 4 yellow straight lines.
  After that windows Vista won't sign and it will remain as a black screen.

  It works in safe mode and the design that comes at the beginning, there will be a design similar to the desktop, any window, I opened.

  Could be my graphics card?

  Hello!

  It is difficult to understand, but have you tried an external monitor on the laptop?
  So you can make sure if it s a problem with the internal display or mother/graphics chip.

  Maybe it s only a driver or software issue because you said it works in safe mode. Maybe you should try to update the display driver that you can find on the Toshiba site.

  Good bye

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• Qosmio G30-204 - how to replace the screen?

  Hi people. I have a Qosmio G30-204.

  The screen to the right corner is not sure as the rest of the 3 corners of the screen.
  How can I tighten again?

  Where are the screws on the screen?

  Hello

  Have you tested the laptop to an external monitor? Perhaps it is not a problem with the monitor and your graphics card or card mother is causing this issue.
  Check it!

  Moreover I replaced didn't a computer laptop screen myself again because it s too difficult and delicate in my opinion. You need to remove a large number of screws and you should be very careful that you n t destroy a part or material of the laptop.

  I think the best way is to contact a local laptop technician you. They can try to help you and they have enough experience for the exchange of material on a laptop computer.

  Good bye

• Qosmio G30 pink pixels on the screen - what can I try next?

  I have a qosmio G30 on the white parts of the screen were pink pixel in them as well as purple pink pixels around parts.

  In reading the various posts, I have eliminated the graphics chip/card that I can get a perfect image on an external display. The laptop is out of warranty and also out of the extra year for graphics problems, so I tried to fix it myself. I tried all of the solutions below and none have worked.

  I wonder if anyone could give me any other things to try.

  I've updated the BIOS and the display driver - no change.
  I then replaced the motherboard to the LCD connection with a new cable - no change.

  And finally, I have replaced the LCD screen with a new - again no change.

  -Always works fine on an external monitor.

  Any ideas or suggestions would be very appreciated.

  Thank you very much

  Hello

  I think you're talking about dead pixels.
  Would this be possible?

  The problem of dead pixels has nothing to do with the graphics card but it s a display problem.
  So I was wondering why this problem persists after the LCD has been replaced

  Maybe a Toshiba laptop technician should verify and test parts of the hardware to make sure what part could be the problem exactly

• Qosmio G30-175: screen starts flickering pixels & funny

  Hello

  I have PC laptop Toshiba Qosmio G30-175. I was working fine until last week. But all of a sudden screen looks funny disappeared.
  When I start the laptop, it starts well and windows start too thin.
  But a few early screen minute flicker and everything on the screen disappear and all the screen do cover with kind of pixels.

  Could someone please advice me, what went wrong for this laptop. Is the motherboard or card went graph.
  If so, how can I get it fixed at a great price.
  Is it possible to change the graphics card.

  much thanks

  Hi mate

  I think I have bad news for you.
  According to your description the graphics card chip begins to malfunction, and I think you have only one chance to solve this problem; the defective part must be replaced!

  I would recommend so contact the nearest authorized service partner in your country and ask for later handling.

  Sorry mate but it isn't alternative :(

  Good luck

• Screen on Qosmio G30-153 froze playing a game

  I got my new laptop for a little over 7 weeks now and it crashed. While playing a game (Need for speed most wanted) the frozen screen and the only way I could turn off the laptop was by disconnecting the battery.

  After that, every time that you start the machine, the fan comes on but nothing happens. I took the laptop back to the officer and said that the motherboard must be replaced.

  Apparently, the machine will work with an external monitor. Any reason, why this happened and this never occurred before on these models?

  When you start the laptop have you tried to switch to the screen of laptop using FN + F5 key combination?

  Use the Qosmio G30 for about 3 months and never noticed anything similar to play different games.

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Can Qosmio G30-126 - I use the frequency refresh screen, more than 60?

  Hello
  My laptop Qosmio G30-126

  Problem:
  My screen refresh rate is 60. There is an option only "60". How can I show more than 70-75-85.
  Type as generic pnp monitor monitor show

  Thank you

  Hello

  Please check this Toshiba document where you can find an answer to your question:
  http://APS2.toshiba-tro.de/KB0/FAQ35007A001OR01.htm

  Welcome them

• Qosmio G30 - blue screen of death

  recently I had this error on a blue screen when starting my pc (I can't go in either safe mode) so I decided to start from the cd and repair the system, but the problem is I can't boot from the cd or a port USB of my laptop Qosmio g30... the problem is that I tested the cd on my friends pc and it booted from it mine shows the following message
  "During initialization and the link...".

  PXE - E61: Media test failure, check cable
  "PXE - MOF: exit Intel Boot Agent.

  I really need help here and I don't like the data on my c drive, so if there is no solution I would appreciate

  Thanks in advance.

  Which CD you want to use for BONE repair?

  Akuma is right. This message occurs if the laptop can not boot from optical disc or HARD disk drive. Then automatically seek next boot device and it's LAN. This message is typical for the start of LAN (cable not connected).

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems