At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

Tags: Windows

Similar Questions

  • My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

    My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
    manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore there only to)
    being bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
    or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

    original title: HELP ME PLEASE!

    (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

    Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

    Take a look at this:

    http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

    Hope this helps

    Post back if necessary

    __________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

    I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

    Hi cgrosenick,

    -What software changes you did on the computer before the show?

    Follow these steps:

    Method 1:

    Start your computer in last known good configuration mode.

    For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

     

    Method 2:

     

    Follow the steps in this article:

    Computer stops responding with a black screen when you start Windows XP

  • I'm playing True Crime New York City on windows xp and every time I'm trying to play the screen goes black and then I'm back at my desk.

    Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.

    Hello Respect137, welcome.

    It would appear that running DirectX files installed on your system were corrupt. This gives a test:
    2 follow the instructions which is there to install the package to update DirectX
    3. Once installed, restart your computer and try to run the game
    Let us know if this helps,
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • screen saver; have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    ===============================
    I don't know what is causing this problem but would be
    suspicious, it is related to a corrupted or obsolete
    video driver.

    Might be interesting to try to reduce your graphics
    Hardware acceleration instructions
    in the following article.

    How to put in back of graphics hardware acceleration
    http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
    (scroll down to: "If you are using Windows 2000 or XP")

    If they improve the question, you should look for the
    site Web of MFG. your video card
    a updated driver Win XP compatible video. Or...
    If your computer is a laptop... Search support
    site of the manufacturer of your computer.

    If you do not know the make and model of your
    Video adapter, see the documentation that
    supplied with the computer.

    Also you can find info on your video by driver
    go to Device Manager: you can launch
    By clicking Device Manager on... Start/run and
    type or copy / paste:
    devmgmt.msc
    And then press ENTER.

    Expand "Graphics cards" and right click
    the name of your graphics... then
    choose... Properties / tab pilot... FYI.

    You should find the make and model of your
    adapter display as well as the version of the driver.

    If the driver on the Web site is no longer
    current than you run...
    Download and install it. In addition, installation
    instructions that should be followed closely
    should be available on the support site.

    Once installed the new video driver... you
    can restore your full acceleration.

    Good luck...

  • Portege M400 is frozen, screen goes black and the fan speed increases when moved

    Can someone help me please?

    I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
    Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
    So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

    Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

  • Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

    original title: Auto Adjust

    Hello.

    Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

    I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

    Any help would be appreciated... Thank you

    Try this:

    Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    Then:

    http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable

    When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable. It happened all of a sudden I used he linked TV to catch-up on TV episodes until last night when it happened out of the blue!
    Can someone please help with this.

    Contact the manufacturer of your laptop.  Also - that there might be a key combination for your laptop that changes the screen from the main output is - look at your documentation or on your keyboard for such a combination of keys (what kind of computer is? Make & model...)

  • My screen goes black and 'safe mode' apears

    My screen goes black in the middle of something and then 'safe mode' appears and then the screen turns off.  This often happens in the middle of a game on FACEBOOK.  I can hear the game continue to pay and then it times out.  Quite often when I switch the power on the screen is covered in black and white letters and symbols coloured with casual, and I can see 'safe mode' in the middle of it.  Takes several attempts to actually it reboot.  Any help?

    Hi BarbaraNevitt,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Disconnect all external devices and try to start the computer and check the issue persists.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Update the display/graph drivers and chipset.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Screen goes black and only the mouse pointer visible to the windows xp screen

    My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

    Thanks for your answers, Dena and Jojih.

    The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.

  • Screen goes black and white after the computer starts.

    Original title: after starting Windows 7 everything is OK for a minute, then suddemly the screen is white and white and I Pascal t do anything or get into programs.

    After the start of Windows 7, everything is OK for a minute or two, then all of a sudden the screen goes white and blank and I can't move forward.  If I disconnect and try again.  Don't get into F8 either.

    Hi Eunice,

    Pilots, conflicts with other programs, malicious software and memory can cause starting problems.

    1. did you of recent changes on the computer before this problem?

    2. What is the brand and model of the computer?


    Method 1:

    We will first of all disconnect all external devices except the keyboard and mouse, if necessary and see if the problem is resolved.

    Method 2:
    If the problem persists, you can start the computer to the last good known Configuration and check if that helps.

    Using the last good known Configuration
    http://Windows.Microsoft.com/en-us/Windows7/using-last-Knofwn-good-configuration

    Method 3
    If the problem persists, I suggest to perform a startup repair and check if that helps.

    Startup Repair: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • screen goes black and moves randomly please explain answer in detail as I use windows 10 and I can not understand the answers already given

    screen turns black and moves randomly when using most of the tools of photoshop.  I use windows 10 and cannot follow the above.

    Hi Nodstown,

    Greetings.

    • What version of PS do you use?
    • Mac or Windows, which version?
    • There may be several reasons for this.
      • Preferences corrupt.
      • Obsolete graphics drivers.
    • Solution
      • Try resetting the PS tools. (See screenshot)
      • Try resetting the PS preferences - to restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings.

    Concerning

    Rohit

  • screen goes black and white after departure upward

    IM using windows vista I tried to reconnect the display monitor connections but still does not when I restart pc color lights up then goes black and white

     
    IM using windows vista I tried to reconnect the display monitor connections but still does not when I restart pc color lights up then goes black and white

    This is not a problem of IE.  Most likely a symptom of the use of the OS high-contrast mode accessibility option.   For example try to press LeftAlt + LeftShift + print to pass this parameter.

    Good luck

    Robert Aldwinckle
    ---

  • Problem with the screen goes black and then completely black

    While watching a movie saved/tv show with Windows Media Player/VLC or any other media software, when a night scene or any situation where there is an important subject of black screen, my screen becomes progressively more dark, until it becomes completely black and then, after a brief moment begins to clear up, but is still much darker than it should be. Am I engaged a setting in my graphics card which is the cause?

    Operating system system model
    Windows 7 Edition Home Premium (build 7600)
    Install language: English (United States)
    Local system: English (United States) Compaq-Presario, NC696AA-ABA SR5710Y
    System serial number: MXX91902Q1
    Case type: Desktop
    Processor and b main circuit
    2.30 GHz AMD Athlon Dual Core
    64-bit ready
    Multi-core (2 total)
    Not hyper-threaded Board: ECS Iris8 1.0
    The bus clock: 201 MHz
    BIOS: Phoenix Technologies, LTD V5.36 11/19/2008

    Display

    NVIDIA nForce Serial ATA Controller
    Standard dual channel PCI IDE controller NVIDIA GeForce 9400 GT [graphics card]
    ViewSonic VT2430-M [Monitor] (24.0 "screws, s/n R4S101790118, April 2010)

    Does not need to update the Nvidia driver because it is up to date and could not update the Viewsonic that Windows only recognizes as "PnP monitor" generic monitor, even if it is described as Viewsonic in the Nvidia Control Panel. Did restore the default values in the video section of the Nvidia Control Panel, and that seems to have solved the problem.

    Thanks a lot for your help!

    Install these updates of 2 drivers and then restart the pc and try again see if the problem occurs.

    Another thing that I recommend is trying to reset your settings to default monitor by pressing the MENU button and finding the option defauult of zero/factory reset.

    You can also restore the default settings in the Nvidia Control Panel by clicking on restore by default in most sections.

Maybe you are looking for

  • Satellite C660 - no display

    I have a portable Satellite C660 is only a couple months unused and too expensive. I turned it on the other day, but the screen is completely blank. The laptop makes sounds 'beeps '. One, fairly high long beep, followed by two beeps in burst but the

  • HP DreamColor Z27x: Calibration HP Dreamcolor Z27x - guides

    Hello The User Guide Dreamcolor_Z27x.pdf, page52 under "Introduction to Color Calibration. says: " A detailed discussion of the calibration is covered in theHP DreamColor Z27x Advanced User Guide " This guide seems to be hidden quite well. Then, on p

  • In iPhoto, when I hit the info icon, I get a note of gobbledygook.

    In iPhoto, when I hit the "info" icon, I get a note long gibberish.  The button 'edit', 'create', ' add to ' and 'share' icons work OK.

  • functional overall mishap/quirk

    While mangling one overall functional implementation, I updated by mistake the playback indicator inside the while loop in the case of reading. I quickly discovered that when any write operation, the indicator has been always reset to a default value

  • EOS D 760, the proportions do not exist in the menus

    The menu with the proportions do not exist. He also seemt to be missed a few other tabs in the menu. In my camera, there are fewer tabs menu as indicated in the guide. And I can not reset to factory settings, missing menu tab.