At the start of Vista, the touch pad does not work perfectly.

Similar Questions

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• Stream laptop HP 11: after the update of windows 8.1 Windows 10, the touch pad does not work

  My Hp Notebook PC 11 Stream works fine on Windows 8, 1 until I updated to windows 10. Now the touchpad is dead. I have to use a USB mouse.  In Device Manager, all the drivers work fine. Any clue?

  Thank you for visiting the Forums HP's Support and welcome.

  Information below can help you

  Make sure your keyboard is on

  Check in the settings 'Mouse & touchpad' to ensure that the touchpad is enabled.

  Open the Settings menu (Start > settings) and go to devices > Mouse & touchpad. Scroll to the bottom of the screen, and then click additional mouse options.

  The mouse properties window opens. Click on the tab more far to the right (it may be called MOMENTUM ordevice settings). Under devices make sure your keyboard is not disabled. If it is disabled, click on the touch pad to select, and then click Activate.

  Another thing to try is to see if your laptop has a function button that enables / disables the touchpad. It should look like a tiny touchpad with a diagonal line through it (on my computer laptop is F6, on other laptops we Fn + F5, Fn + F6 , or something else entirely). Try to switch this key if you have before you panic on the misfortunes of possible touchpad.

  Update your drivers

  Windows 10 has been out for a few months now, and most of the manufacturers of touchpad have updated their drivers accordingly. But you may need to manually update your driver.

  There are two ways to do this. First, click on the Start button and select Control Panel. In the Control Panel window, open the Device Manager.

  By clicking on "update driver software... "will your computer Internet search for an updated driver.

  Best regards;

  Marcel

  I am an employee of HP

  Please click the White Star Kudos to say thank you for helping.

  Please check accept as Solution if my help has solved your problem.

• HP 15 ab019na: clicking on the touch pad does not work

  My laptop newly purchased has just been upgraded to Windows 10. My problem is with the touch-pad. Clicking on most of the things with it (left or right) turn simply on the element, but it does not open the item. For example, the cross that appears in the top right, to a screen, to cancel this screen does not when you click on it. I have to touch it with my finger so he could work (the laptop's touch). A lot of hypertext links do not open when you click on it, but their contact works. The Start button at the bottom left does not open when you click on it, but it's when they are affected.

  Clicking is sometimes more convenient than touch, so I would if the issue is resolved.

  Hello @Gallant,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the TouchPad and wanted to help you!

  Please consult the following document and let me know how it goes:

  HP Notebook PC - using the touchpad and ClickPad (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Kind regards!

• How can I activate my touch Pad? a light is on and the touch pad does not work

  I have a Toshiba laptop and the touchpad equipped with a bright power who insists to stay on and do not let me use the touch pad.

  How to turn off the light or enable the touchpad please

  Thanks in advance if you can help

  R

  I have a Toshiba laptop and the touchpad equipped with a bright power who insists to stay on and do not let me use the touch pad.

  How to turn off the light or enable the touchpad please

  Thanks in advance if you can help

  R

  Your touchpad driver is maybe defective. Go to the Toshiba website from the link below and enter your laptop model number and the operating system that you will find on a label on the back and download it and install it the Touch Pad Driver and see if that fixes the problem.
  http://www.MyToshiba.com.au/support/download

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.

• volume and the touch screen does not work

  good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy

  OT:

  my / Tablet PC

  Dorothy salvation,

  Thanks for posting your query in Microsoft Community.

  I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;

  • When was the last time that the two have worked?
  • Remember to no particular change in the device before the show?
  • Since the touch screen does not work, you are able to use the options settings?

  The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.

  Method 1: Run the troubleshooter of material and check if that helps.

  a. type in the right edge of the screen, and then click Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.

  c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.

  Method 2: Update the drivers

  Step 1: Update the driver through Device Manager

  a. press the Windows key + X , and then click Device Manager

  b. expand driver Sound

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  2. Press or click check nowand then wait while Windows searches the latest updates for your PC.

  3. If updates are found, tap or click install updates.

     Read and accept the terms of the license and then press or click Finish if the update requires it.

  4. Restart the computer for the updates to be applied.

  Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.

  You can also check: touch and pen settings: FAQ

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• right side of the touch scren does not work. What can I do about it? Office Jet 6500 a Plus

  The right side of the touch screen of my Office Jet 6500 has more does not work.  That's why I can not fax when well even I can receive faxes.  . I can copy and scan because this side works.  What I do about it?

  Hi 115 and jonimac,.

  If please eset the printer to its factory default and then try again, reset instructions has been sent to you as a private message.

  NOTE: Reset erases all settings defined by the user.

• S2240T, the touch screen does not work

  I just bought this monitor and it displays correctly what should be, but it does nothing when I touch it. I have the USB cable connecting my monitor to my computer. My OS is Windows 8.1. In my view, it is possible that it must be installed for the contact to work, but the disc (and documentation) that it comes with a driver is very little used for this. The driver on the disk I installed seems just for display, no contact.

  I had to reset my computer all Win8.1

  I have the touchscreen Dell P2314T (VGA) also has worked well since I bought the new optiplex and monitors. When I reinstall my system it di does not work.

  I have unplugged all connections to the back of the monitor and was able then to recalibrate and set the touch screen and now it works fine.

  THUS, it does not work with Win 8.1

  but should be the last recognized maybe or just USB connection need to be re added as if it were a new device to the modified system.

• Aspire S7 Touch Pad does not work (fn + T doesn't help)

  The touchpad on my Aspire S7 does not work, and I tried without a doubt the fn + T and alt + fn T patches.  The touchpad has been buggy before total failure.  He would sometimes get stuck in the guts down, etc.  Now, there is zero answer either.

  DCAR

  I don't know what answer you're after here.

  If it is under warranty, have Acer Fixez_ the.

  If it is not under warranty, have a repairman fix.

  Or use a USB mouse.

  But I think you knew that already.

  Sort

• I jut got my iPhone 6 s today and the touch screen does not work

  I just bought my iPhone more than 6 s and the touchscreen st all working a suddon, why won't my screen? Reseting it works or I will consider

  If the screen of your iPhone, iPad or iPod touch does not respond to the touch - Apple Support

• The touch screen does not work

  After the upgrade of win8.1 to win 10, the touch screen has failed since then.
  Model. : aspire 5642 V7-482PG... TOUCH SCREEN
  I can't figure out why?

  Great! I love it when it works.

  Can you mark the topic as resolved? In this way, others with the same question will be made here...

• HP Pavilion 15-N010TX: laptop touch pad does not work

  Hello, I have the HP Pavilion 15-N010TX. I connect a usb laptop headset, then leave my touchpad has stopped working. I tried to activate it by typing double in the upper left corner, its not work. Then I went to change the setting of the mouse, their i am not founding option toggle. I then in Device Manager their i do not found the mouse in the list. And then I tried the download Synaptics and followed the instructions but it didn't work. Even I tried to reset hard too, but the result is the same.

  Please, help me out of this problem.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click the link below to learn more the following steps to resolve this problem of troubleshooting

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5229455&calledBy=&docid=emr_na-c03523373-5&docLocale=

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• My touch pad does not work. How to activate it?

  Usually, I use a wireless mouse but want to use the touchpad.  I'd appreciate any help you could give me!  May not know where to go to find an answer.  It cannot be hardware and drivers.

  Hello

  It is re - activate if you remove the mouse from the computer?

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The touch screen does not work after a reset.

  Original title: lost after factory reset touch screen

  I bought an acer aspire z1801 on the secondary market, the former owner has done a factory reset to delete personal data, but now there is no touch screen. If I look in the windows 7 Home premium, there is not a program for pen and touch, I learn that something happened when restarting a part of windows is missing? If I can add this section or I have to re install a new windows 7 on my computer, if I have to pay for the program I could go directly to the upgrade of windows 8 and that would be the missing piece?

  Thank you

  Hello

  Welcome to the Microsoft community.

  I see that contact drivers are missing on your computer.

  You can check this link to order tp download and install the drivers:

  http://support.Acer.com/us/en/product/default.aspx?modelId=3796

  Alternatively, you can contact Acer for assistance with the issue of touch, because the question has started to occur after performing a factory reset.

  Here is an article which described on 'Upgrade to Windows 8'.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  I hope this helps.

  If you need help with Windows let us know.