At the start of XP, make error rundll error loading \3\lxcctime.dll

Similar Questions

• At the start I have receiver error loading \3\DLCXtime.dll

  When I boot I get "error loading \3\DLCXtime.dll".
  The specified module could not be found.

  I know that this has to do with my old Dell printer driver drivers, but I've improved my printer and no longer have the old Dell on my system. I thought that I had uninstalled all the software from Dell, but obviously not.

  What should I do to rid my computer of this left over trash? Thanking you in advance.

  Kind regards

  G. Bowes

  E-mail address is removed from the privacy *.

  Hello

  DLCXtime.dll is part of the Dell printer drivers. You probably need to reinstall to check the status.

  You can contact Dell technical support for known problems.

  You can view this issue in the community Dell here: http://en.community.dell.com/support-forums/peripherals/f/3528.aspx

  You will get updates Dell drivers here: http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Windows cannot start due to software error: load needed for dll Kerneal

  Okay so a few minutes before I started to write this question I have connected my Xbox 360 controller to my computer. When I did the connection popup Wizard and asked to check the updates of windows to the right files to download to the controller. After that, he finds the correct files and downloaded said files. He then asked me to restart my computer for the software could take effect. Well, after that I did the error message, it's in the title, came on the screen and now my computer will not pass this error.

  Also I know you hear this is a lot but, honestly its really annoying that you don't have a phone number on your website

  MS10-047: vulnerability in Windows kernel could allow elevation of privilege

  http://support.Microsoft.com/kb/981852>

  The repeated failures to install KB981852 suggest very strongly that you see the effects of a rootkit infection W32/Alureon-Variant!

  Following the instructions on this site should help you:

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller>

  ~ or ~.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/>

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx>

  For enterprise customers, support for security updates is available through your usual support contacts.

• I get error loading \3\DLCXtime.dll

  When I start up I get error loading \3\DLCXtime.dll
  The specified module could not be found?

  How to solve this?

  Thank you
  Arthur H

  Hello

  DLCXtime.dll is part of your Dell printer drivers. You probably need to reinstall. Also contact Dell Support
  and their forums for known problems.

  Dell drivers
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

• At the start, get error loading driver udesiab.dll

  on startup, I get an error loading driver udesiab.dll, no matter who with an idea what is this driver or how can I remove it?

  Hello

  read the slot results in google for "udesiab.dll."

  http://www.google.com/search?hl=en&source=HP&q=udesiab.dll&aq=f&aqi=&AQL=&OQ=

  There is no search results for her that usually indicates that it is malware or a stay starting entry of for her

  to be on the good side for malware scan;

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• At the start of my system errors 0 x 00000124 (0x00000000, 0x823c401c, 0xFE200040, 0x0060114A)

  Hello friends,

  This is my first time posting a request to help me so I don't know how to ask for help, but I'm sure there are a lot of people who will be happy to help me with this question. I have i7 PC that came in the first batch of the i7 products and I am running raid 0. I have the code of 0 x 00000124 (0x00000000, 0x823c401c, 0xFE200040, 0x0060114A) when you try to start my next system. Please help me to fix this problem. Thanks in advance.

  Concerning

  Binder

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• By connecting to the laptop HP 1030 - NR running XP, make error loading C:\WINDOWS\jsocafofoceq.dll

  This error message appears when I connect - error loading C:\WINDOWS\jsocafofoceq.dll.  My system is XP on my laptop HP 1030-NR.
  Help!

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

  original title:. Error loading windows

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

  First of all, download, install, update and scan with these two free utilities:
  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

  Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.

• I have these questions on start up. First-error loading C:\ Windows\32\cqahgvb DLL

  On startup, I get error loading C:\ Windows\32\cqahgvb DLL

  The specified Module could not be found.
  Driver cure
  There seems to be an error during the installation, please re install the application.
  Can you please help!

  Hi bowtieone,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• ERROR: An error occurred during the installation of assembly component / ERROR: load capacity of third-party installer Adobe_Lightroom_x64.msi failed with exit code: 1603

  During the Installation of LR, I get an error message. Initially, I didn't have enough space for the installation on the boot partition drive. However, now, it should be enough and I rebooted the computer, a couple of times, so I guess that the temporary installation files have been deleted.

  Now, however every time I try to reinstall the software I get the following messages:

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ---

  ERROR: An error occurred during the installation of Assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0 X 80070002.

  ERROR: Install payload MSI failed with the error: 1603 - Schwerwiegender Fehler bei der Installation.

  MSI error message: an error occurred during the installation of Assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0 X 80070002.

  ERROR: installer of third party Adobe_Lightroom_x64.msi payload failed with exit code: 1603

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ---

  Given that the PS has been installed without problem I refrain from uninstalling the creative cloud and start over.

  Any tips?

  THX

  Claasd5335054 these errors can be found in the event viewer.  It is available through the Administrative Tools Control Panel.

• Error Msg: your msg error loading win\jquarayeh.dll

  Each time computer is the startup error msg pop up: your error msg load win\jquarayeh.dll.  What is this msg and how to fix it?

  Each time computer is the startup error msg pop up: your error msg load win\jquarayeh.dll.  What is this msg and how to fix it?

  You are not charged by the letter when you post here.  Generally, it will display the full error message.  However...

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.  There is no success for jquarayeh.dll

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• To sttartup error 'loading\3\dlcxtime.dll run.dll error. "

  Original title: ERROR LOADING \3\DLCXTIME. DLL

  When I start my computer I get this error message: RUN. LOADING\3\DLCXTIME DLL ERROR. DLL HOW TO REMOVE THIS

  Hello

  You did changes to the computer before the show?
   
   
  DLCXtime.dll is part of the Dell printer drivers.
   
   
  Method 1:
   
  Step 1:
  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
   
   
   
  Step 2:
   
  Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
   
  Method 2: Uninstall and reinstall the printer and see if that helps.
  Reference:
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• Error loading windows: msvex2.dll cannot be found

  My computer has been infected by the Virus think Point. I ran Malware Anti-Malware bytes and followed these instructions

  http://www.precisesecurity.com/rogue/think-point/

  When I load windows now it says Error loading c:\\windows\msvex2.dll specified module cannot be found.
  I was able to download and install the latest service pack and it worked but windows keeps freezing and try to update AVG Free has given me a blue error screen.

  Anyone has any experience with this problem and know how to fix?

  Please see when I connect to my PC, I see a ThinkPoint window in this forum.

  If this does not resolve the problem, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• From the start I get network error message: DHCP error event ID 1003 began ID1002.

  I have Compaq Presario SR1220NX, Windows XP, SP3. With the help of Verizon FIOS Wiresless and AOL Broadband Internet service provider.  When starting up I get the message of network event ID 1003 errors and 2 times I got ID 1002.  I was on the phone with Verizon, restarted Wiresless router and they did some other configurations.  Looks after the router restarts and stuff and revive his party.  But after a while he comes back again after cold reboot. Services DHCP is set to automatic.  I don't know that he always comes to the top.  Any help would be appreciated.

  Hello
  You can check these links:
  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1003&EvtSrc=DHCP&lcid=1033

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1002&EvtSrc=DHCP&lcid=1033

  I suggest you to contact your Internet service provider to verify the DHCP in your router settings.