AT100 - GPS stopped working

Similar Questions

• Re: AT200 - gps receiver stopped working

  For some reason gps receiver stopped working on my camera (ics at200)...
  All using the internet connection of positioning works fine however.

  Is there a cure?

  Have you used a gps Utility (like 'GPS Test' or 'latest coordinates GPS') to look at how many satellites were in sight? (or opportunity)

  Have you tested the GPS feature outside under the open sky or inside a building.

  How long wait it for the vacancy?

  "Positioning while using internet ' often used completely different techniques. Google/Android to calculate the position of HotSpots WiFi known (which would have been unconsciously picked up by other android with gps & wifi active devices or streetview cars) or the cell-ID (which is much less accurate).

  The AGPS (Web support) function usually reduced ownly time until GPS is ready to provide the contact information (time to first fix). Usually these data AGPS is also valid for a week or two after you download once. (The "Test GPS" app has an option to manually request the AGPS data that makes sense only if the internet is available.)

  Get a first fix for GPS, especially if the last successful use of GPS was some time there can take a long time. So outside, which allows GPS, maintain a stable and up to 15-30 min wait may be required. 'GPS Test' or 'GPS coordinates' applications can be used to observe the status of the fact receiver. Usually satellites should appear almost immediately, but the GPS takes a few additional minutes until. This is the time required to download Almanac data and satellite ephemeris. (If not already obtained by an AGPS function).

• Why my GPS stopped suddenly when the location and the surroundings have not changed work?

  Why my GPS stopped suddenly when the location, a framework and the weather conditions have not changed work?

  Ros

  iPhone 4S OS 9.2.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If this does not work and to rule out a software problem, set it back to factory settings, without using any data backup later. Test the phone and if the GPS works again, restore the backup.

  If the GPS does not work after the factory reset, it is a hardware problem, and Apple has to repair the phone if GPS can be fixed.

  In the case where it cannot be resolved, it could offer to replace the iPhone 4s, if you are willing to pay the price for the refurbished phone.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from: answer Service Center - iPhone

  
  

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Programs Office Compatibility applications Applications miomore has stopped working

  The MIOMORE DESKTOP Manager Mark MIO GPS program does not work under Windows 7.

  The installation takes place properly, and launch appears the message "MIOMORE has stopped working".

  Uninstall, new installation, nothing works!

  Launch in Windows XP SP3 accounting mode which worked before moving to Windows 7 launch of the same message.

  I installed the latest version of Adobe FLASH Player (11.6.602.180) and it still doesn't work.

  The MIOMORE DESKTOP version is Davis: V7_30_005_SP, and does no better than the version Report.

  If you have encountered the same problem, please pour your help.

  The company MIO is unresponsive to my requests.

  Hello

  You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

  iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

  After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

  Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

  Possible only "close program"...

  Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

  All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

  Checked the event viewer:

  1. error message:

  Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

  Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

  Exception code: 0xc0000005

  Offset: 0x004f0e09

  ID of the process failing: 0xcc4

  Start time of application vulnerabilities: 0x01d218b3194e2f01

  The failing application path: C:\Program Files\iTunes\iTunes.exe

  Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

  Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

  2. Windows Error Reporting

  Fault of type 1024926102, bucket 25

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: iTunes.exe

  P2: 12.5.1.21

  P3: 57cfb09f

  P4: WebKit.dll

  P5: 7602.1050.4.5

  P6: 57c11f7f

  P7: c0000005

  P8: 004f0e09

  P9:

  P10:

  Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support

• Why auto unlock Mac with Apple Watch stop working?

  When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.

  Your Apple Watch is unlocked?

• Function keys row has stopped working after update 10.11.6

  I upgraded my Macbook Pro to El Capitan 10.11.6 last week, and the row function keys have now stopped working.  If someone has had this problem and how can it be solved?

  Thanks in advance for your help (I'm not very tech savvy, so please, responses may be simplistic?)

  The keys work when starting recovery?

  On OS X Recovery - Apple Support

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Target display mode has suddenly stopped working

  I've been using display mode target using a cable thunderbolt between my iMac 21.5 inches (end of 2012) and Macbook Air 13 inch (early 2014) for about six months.

  I had a few weeks off and had to return to find that I can enter is no longer target display mode! When I press Control-F2 on my keyboard connected to my iMac, that nothing is happening. I also tried Fn-control-F2. I tried different ports in case one of them is damaged. But nothing helped.

  Anyone has any suggestions as to why target display mode would have stopped working so suddenly? I really like the feature of double screens between my macbook and iMac and would really like to come back!

  Thank you.

  I know target Display Mode will work, but only if I use the command-f2 from the login screen. After the connection, the command does not work. have you tried?

• iMovie has stopped working since iOS 10

  iMovie has stopped working since iOS 10

  Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

  Hello iMovie does not work,

  After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
  I recommend you read these articles, there are a few things that we can try to get the application running again.

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support
  Restart your iPhone, iPad or iPod touch - Apple Support

  If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

  Thank you for using communities of Apple Support. Good day.