AT200 - slow network after update 4.0.3

Similar Questions

• Slow MacBook after updating to mac os sierra

  Mac book is very slow after updating to mac os sierra. I try to open an app and its very slow, or finder

  How can I fix it?

  I already rebooted it but no luck

  I have a mac book pro end 2011 version 10.12

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

  Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

  Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

  Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to do read how test a question in another account on your Mac - Apple Support. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: OS X El Capitan: remove a user. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

  Let me know what you decide.

• Why is my iphone 6 so slow performance after updating ios 9.3.4?

  After the 9.3.4 software update, my iphone 6 is really slow. I find it really difficult to get applications like safari and youtube to work and after a few days ago, they hardly work. Ive seen other people on this issue and I was wondering if anyone knew a fix to it.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Motorola Milestone does not connect to the corporate network after updating to Froyo...

  I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

  The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

  Any help? Please, I beg you.

  Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

• Computer slowed down after updates

  A home computer using Vista premium with current updates began to slow down about 30 days ago.  After a normal start (about one minute) to power, the system seems to stop.  No CPU activity and a bit of disk activity.  Sometimes, keyboard and mouse die requiring a re - start.  Problem seems to go away after about 30 to 50 minutes of no apparent activity. I suspect the hard drive, but could be motherboard controller or (I hope) a software setting.

  MalwareBytes no problem after full search.

  Went to the event log and found

  c:\windows\system32\wuaueng.dll (1140) SUS20ClientDataStore: a read request to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 188190720 (0x000000000b379000) for 4096 (0 x 00001000) bytes succeeded, but took an abnormally long time (64 seconds) is served by the operating system. In addition, 0 other requests to this file I/o also took an abnormally long time to be repaired since the last post regarding this issue has been sent 65 seconds ago. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.

  Typical additional information

  The event XML:

  509

  3

  7

  0 x 80000000000000

  16728

  Application

  also

  Windows Windows (3292): A request to write in the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 0 (0 x 0000000000000000) to 8192 bytes (0 x 00002000) succeeded, but it took an abnormally long time (96 seconds) to be processed by the operating system. In addition, the 63 other requests to this file I/o also took an abnormally long time to be repaired since the last post regarding this issue has been sent 139 seconds ago. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.

  It is a stand alone machine.  There are no servers, not even a local server.

  Hello

  Method 1 : update the Chipset drivers and all the other drivers on the computer manufacturer site.

  Method 2: Run the Fixit and check if the problem is solved or not.

  Difficulty of the Windows system performance on slow Windows computers (Fixit) issues

  Method 3 : perform the steps in the article and check if the problem persists.

  Optimize Windows Vista for better performance

  Hope that helps.

• Slow start after updating windows 64-bit

  My computer hp pavilion dv6 laptop (1 year) worked fine until July 19 (I reformatted the hard drive and original windows 7 64 bit has been installed on 15 July). On 19 July after a few updates, it has started to become slow at startup (about 5 minutes) (it used to take me just less than a minute). I did a clean boot and startup is still slow. so the problem is with some updates I've installed so far

  PS: I do not know what the laptop updated slow but he too many updates installed so far

  Hello

  1. who is the antivirus application installed on the computer?

  I suggest you follow these methods.

  Method 1: Start the computer in safe mode and check.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Run the Fixit mentioned below. Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Method 3: Visit the manufacturer's Web site, download and install the updated drivers available for your computer, see question.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3872814&TaskID=135

  See also: optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  I hope this helps!

• AT200 slow browsing after upgrade ICS

  Hello!

  After official successful upgrade from 3.x to 4.x (Ice Cream Sandwitch) everything works faster and smothly (applications open, moving through menus, typing...), but when I browse any web is extremely slowly. I have try it with different browsers (opera, dolphin, chrome,...) and same problem :-(

  Please I need help, any suggests? Anyone with the same issue?

  I read on the internet and find the same question on different manufacturers (Xoom, Galaxy Tab,..), also update from 3.x to 4.x

  Kind regards
  Francesc.

  I have exactly the same problem, it's so frustrating! I guess it's a common bug for tablets and keep checking for updates every day... I guess it's just a waiting game until there is a resolution. Has anyone tried to call Toshiba support?

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Cannot connect to the network after updating to iOS 9.3 Beta

  I downloaded and installed the public beta version of iOS 9.3 on my iPhone 6 today. After that, I am unable to connect to the network. I tried to reset the network connection of the phone and have my cell phone operator reset the network connection. None worked. Anyone else have this same problem?

  I was able to solve the problem by turning on "Airplane Mode" for 5 seconds, then shut off again. Everything seems to work fine now.

• Need help.  Slow Safari after updating the recent Mac operating system. How can we speed it up?

  Updated Mac operating system made last night and now our analyses of Safari.  What can we do to speed up browsing?

  First of all, read the 100 or so other threads asking more or less the same thing.

  Do you have? Its work to type again and again and...

  the Cap is not slow. You need to know what he's slowing down. Assume the softwrae part 3

• Strange editor behavior of virtual network after updating to Windows 7

  
  Do not know exactly if that's when it happened (update of windows 7) but now when I go in the editor of virtual network, or add a new network or simply modify an existing one, the one I hit

  Any IP field I try to edit/change I can only add two numbers. If there already 3 and I stress and variation 1 of them I can do that two digits by field.

  Then 192.168.100.0 and try to change the TI 100 to 101 going to 10, can I change the 10 to 99, 40 any other number but not a 3 digit number.

  This happened on the workstation 10 if I support (uninstalled) reved and re-installed WS 9 same behavior.

  Anyone else seeing this?

  Thank you

  Found. If I use a custom DPI setting (or 134% of normal), I get the funky behavior.

  If I use the default or 125% setting, everything is good.

  Returned to the standard windows display driver just to see if the same thing and it was (NVidia card) vs NVidia GEForce driver

• Size video questions/slow performance after update by 2014 CC

  Hi all

  I'm not a business editor, so please bear with me here. I spent the last few days around looking for an answer and were not able to achieve much.

  I'm on a Macbook 2011 end Pro, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750 M 512 MB, Mac OS X Lion 10.7.5 (11G63b).

  I have spent a month cut my first little experimental feature including the Deputy Editor set up for me (and which is currently absent).

  My computer is not rocket fast, but I was able to complete the first past little on first CC (7.2.2?) with few major problems.

  A week ago, I upgraded to first CC 2014 8.0.

  I immediately noticed that my images went from this:

  

  To do this:

  

  (Details of the images):

  

  

  Because you might be able to say, we shot very old school VHS to help sell the setting of the 1990s. It was a nightmare to find the best way to export everything. I still don't know if we did it entirely correctly - and I hope that this is not the cause of these problems. Also, I know that VHS is only SD - we chose to import the highest quality, which is 1920 x 1440 and ProRes 422, because more of the precision of image was present in low light.)

  --

  I found that I had to select all the clips in each scenario, right click and select 'Set to the size of the image' to have the complete video picture once more. Then I had to restore everything.

  As I tried to regain my edit, the performance has been much slower. Reading is a nightmare. I constantly get the beach ball of death. It takes several minutes to save the project. And he started to plant about once an hour above all.

  But I continued to work for the last eight days, hoping that I would be able to remedy this somehow.

  I have cleared the cache with no luck.

  I read that I could uncheck "Composite linear color" to make it faster, but it wasn't a problem during the last generation.

  My reading and resolution paused is 1/4.

  I read that I should update my operating system OS X Mavericks, but keeps crashing too! Haha.

  I understand that my system is not the best, but I want to just my project to perform as well as on the first CC before the update.

  I just talked to a technician in Adobe who basically told me that he was not a solution here to also back to first CC from 2014 CC - or buying a new Macbook.

  But there must be a way I can get the same performance I did the upgrade, right? I have a feeling that something happened to how CC 2014 using the existing images.

  (Also, I noticed that the clips where I increased the zoom, i.e. 100% and 110%, were back to their original size. And instead of saying 100%, he said now 300%. I guess it's because of the "image size"SETTING", but this was not the case on the first CC.)

  Does anyone have ideas, what can I do here?

  Here are my settings in sequence on CC 2014:

  

  And CC:

  

  For some reason, some parts of this window are dimmed and not 2014 cc. Not sure if this has anything to do with the question.

  Thanks a ton in advance everybody! I can't really afford to lose 8 days of work, any help would be greatly greatly appreciated!

  I'll be more than happy to provide additional information.

  I'm really looking to find, in the end, if my only two options are: a) go back to first CC and lose my recent work or b) buy a new laptop, which I can't afford.

  (As a question, is there a way I can transfer my recent work of 2014 CC to CC? I understand this is not backwards compatible, but there must be at least a partial solution).

  Best,

  Jon

  You shot SD... If you really need to edit in a sequence of SD.

• Satellite L50 - C slower RAM after update 1.40 BIOS (from 1600 to 1333)

  Help I've just updated the bios of my laptop of version 1.20 to 1.40 from 'Toshiba Service Station'

  now my RAM runs at 1333 Mhz instead of 1600 Mhz

  I also checked the BIOS and there is no option to change the speed of the RAM. I have attached the screenshot below.
  Any fix for that?

  My laptop is L50-C1957
  
  

  Now I think reflashing BIOS version 1.20.
  Since he is originally with v1.10 then I updated to v1.20, which works well, then another update came v1.40, who have now my RAM running at low speed. (All downloaded via Toshiba Service Station and installed/updated day to day by Insyde.exe[which came also with the file downloaded from Toshiba Service Station])

  is it possible to Flash the BIOS through Insyde.exe lower version? say 1.40 to 1.20

  and is anyone know the path where the "Toshiba Service Station" save downloaded updates? I don't find, been looking for hours now...

• Slow PC after update.

  I used Windows update to update my PC and now it has taken a lot of space on my hard drive. It's 59% free space before I started and now it is 39%! I have a lot of games and they run more slowly. PC stalls and there is an hourglass next to the cursor, a large part of the time. It can take up to five minutes to unstall. What happens and how can I erase the disk space?

  New updates should not take 20% of your player! Something happened!

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Hope this helps, Gerry Cornell

• Cannot be saved on the network after update 11.0.10

  If I open an interactive pdf that is currently on a network drive and save as I get a message that says "the document could not be saved. Unable to save this file name. Please save the document under a different name or in a different folder. "I'm a domain administrator and have full access to this place is not a permissions problem. I can save other documents it and make changes to them without problem. Only Adobe Reader. If I go to another computer with Adobe Reader 11.0.9 and do the same steps that it works without problem. Anyone out there know if there is a fix for this yet?

  I use Windows 7 64-bit. This also works fine if I save on my local PC. Only happens when we go to a network location. I also test it on a PC that has 11.0.9 worked well, to give birth to 11.0.10 and have the same problem where it won't save to a network location.

  Try to disable the Safe_mode as a "Test."  If it works then it probably means you need to add the share on the server as a "place of trust.