AT300-101 / AT305 - recovery with root is not possible

Similar Questions

• AT300 unrecognized external power - system update is not possible

  I have an AT300 bought in the United States, but I live in Germany. I bought a Kensington absolute Power Dual USB wall adapter with 2. 1 is to connect the USB charging cable to charge the tablet that works very well. Now, the Toshiba Service Station concludes a update for the Tablet system however, an update is not possible because the update process think that a charging cable is not attached, even it is. Why the Tablet does not recognize the connected charger cable? How can I do a system update? What is the difference between the wall adapter to the United States and the Europe Kensington adapter?

  My guess would be that Toshiba has put a few resistors-ID in the data line in the standard charger so you can identify it.
  Here is an article on Apple doing: [epanorama | http://www.epanorama.net/blog/2010/08/18/apple-charger-secrets/]

• SSH with root does not not on new ESX 4.0 update 2 installation

  I just installed ESX 4.0 Update 2 on two new HP servers. Everything works well except SSH access on the root account. I checked the users and the groups of Virtual Center that root is configured for Shell access, but when I try to SSH, it tells me access denied. I use the same password to try and SSH I use when I open as root on the Virtual Center, so I don't know the password is correct. Another way, it affects me is my backups. I use vRanger connection that requires SSH access to the ESX box and currently cannot access due to the failure with SSH. All that I'm missing? I have the configuration of settings of firewall for incoming connections and outgoing SSH port 22 is accepted on the Virtual Center Security Profile section. Thanks for any help you can provide.

  check the/etc/ssh/sshd_config down... Of allowed root connect together to Yes?

• X 220 with USB3.0, not possible mSata SSD?

  Hello Board,

  We have a few i7 based X 220 Notebooks here, equipped with built-in USB3.0 controller. While we have upgraded successfully variants smaller x 220 with mSATA SSDS from Intel, they are not recognized in i7 Configurations.

  We tried it with several SSD Drives and several notebooks, so I do not think that we are talking here, of the defective units, this seems to be a general problem. We also tried versions of different bios, up 1.16

  Anyone else had similar experiences?

  My simple hypothesis is the following: all WWAN cards that share the same socket are peripheral based USB, while SSDS mSATA Based PCI Express. My first guess is that the PCI Express Lane connected to Express Mini card making in smaller configurations is cable to the USB 3.0 controller chip. If this is right, I guess there is no solution to our problem.

  Any input appreciated.

  Greetings!

  Hibbelharry

  
  

• In the form of formatting with CSS is not possible

  APEX 5.0, Oracle 11 g 2 Express Edition

  I need to format FORM via the external CSS file.

  I created the CSS with the following code:

  .uReport .uReportStandard {}

  padding: 1px;

  do-size: x-small;

  }

  After the page loads the COLUMN header is unchanged (I tryied to copy the CSS code in my template inline-> 'Two level tabs - No. Sidebar').

  I think that the css code will be replaced by another, is it possible?

  Thanks in advance for any help

  Joe4APEX wrote:

  Theme: ""Productivity Applications - 26 *"»
  Page: "two level Tabs - no sidebar.

  Region: "the other reports.

  Report: Standard

  Firefox Mozilla

  I inspected the selectors used in the theme and created more specific override rules by including another class from a report wrapper element in the descendant selector:

  .uReportBody table.uReportStandard thead>tr>th,
  .uReportBody table.uReportStandard tbody>tr>td,
  .uReportBody table.uReportStandard tbody>tr>td input,
  .uReportBody table.uReportStandard tbody>tr>td select,
  .uReportBody table.uReportStandard tbody>tr>td textarea,
  .uReportBody table.uReportStandard tbody>tr>td button {
    padding: 1px;
    font-size: x-small;
  }
  

• When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  Can you try to change the shortcuts = active on all entry Points setting?

  Change of Shortcuts=%Programs%\Check Point\Identity Shortcuts=%Programs%\IdentityAgent Agent

  In this way, we can see if it's the second folder level do. Because when I use only one file, I don't get the issue you reported.

  Out of curiosity:

  It is a Security Check Point Software? What is doing? It works like a ThinApp package?

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• Can not connect with Root

  Hello

  Recently, our ESX sevrers were compliance verified against the

  CIS VMware ESX Server 3.x

  Reference v1.0

  There was a lot of risk found as part of the audit and a remediation plan was given to follow, we did the server seems to work very well except that we can not login with root:

  While intermediatery and PuTTY doin, we use the money account to log the SU to root, earleir he was working now it says Incorrect password .

  Connection through the root of the Console says Login Incorrect ,

  Any help to sort through and understand this issue would be much appreciated

  OK, your first screenshot confirmed suggestion 1 will give the ability to su username to root.  There is even a custom comment you made, in the file etc/pam.d/su, above the line that I asked you to look: ' Uncomment the next line to allow users in the wheel group are authorized to who are allowed to become root.

  1. in this case, just connect to the host with VI client root, go to the users tab and groups, among which the users regular (vmadmin is a certainty) that you are trying to su go, edit the user and add to the wheel group.  You should now be able to ssh or console (DRAC) for the ESX host and su (s) specific.

  2. Once you are root you can ' cat/etc/securetty' the console and the vc/1, vc2, lines etc. must be missing.  The missing lines from you to connect to the consle (DRAC) as root. If you want to keep the sanitation of CIS, you don't have to make other changes, in addition to 1 above.

  Let me know if you have any questions.

  ----

• AT300-101 - How to make a backup of the operating system?

  Hello

  I'm pulling out my hair! I send you my tablet from toshiba AT300-101 away tomorrow to have the battery changed but realized barely booking email repair said I need to make a backup of the operating system / replacement recovery media. After fishing trawl of the web, trying to figure out how do it, I'm still stuck. can someone help me with this please. It would be a great help.

  Thank you.
  Kate

  Hello

  There are different ways to save the date of the android device.
  You can use some 3rd party backup applications (check the Google game store for available applications), or you can use the internal Android option to save the data, application, Wifi passwords and other settings to google's servers.

  This option can be found in Apps App-> settings-> & backup restore

• AT300-101 using Microsoft Exchange Sync problem

  Dear Sir or Madam,

  I use an AT300-101 (ICS 4.0.3) and try to synchronize with my hotmail account.

  Syncronising the AT300 via the Exchange account does not work correctly. It works once in two days.

  The errormessage said, that the server is currently not repsonding. Even to re-create the exchange account after removing it, does not work properly.

  As sync my hotmail account via the Exchange with the other ICS 4.0.3 android devices (HTC, Samsung, etc.) works perfectly the problem seems to be the Tablet and not the exchange server.

  Do you have any idea how to solve this problem.

  Best regards

  Schemmi

  Hello

  Have you tested this after resetting the default Android system?
  From my point of view could be a problem in exchange server as mentioned here by MS:
  http://support.Microsoft.com/kb/2563324

• Problems of recovery with satellite A30 303

  I launched the recovery utility, and then I selected the recovery mode in advance that my hard drive is partiotioned, and I didn't want to format the second partition where different data files were stored.
  The first recovery disc has been loaded and files have bben transferred, then when you are prompted to load the secondary drive an error message as single user are not allowed... has been shown.

  Abandonment of the utility and after rebooting I got following messages:

  Error reading registration MFT VOLUME FILE_
  Internal error 25030
  An internal inconsistency was detected
  Ok

  Then two pages of lines BACK describing the situation.
  The PC unbootable.

  Hello

  This first time that perform you the installation of recovery with comes from Toshiba Recovery CD? If this isn't the case, it is the first time that this problem occurred?

• Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

  I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

  Hey,.

  It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

  Now it s too late for you, but you can order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite A660 - 11 M - drive HARD recovery is not possible

  Hello.

  I bought the satellite A660 - 11 M two months ago. A week before, he started to cause a problem that when turned on, boot HARD drive is not possible in the first place and boot priority option page is shown. Only after that I have reset a start command, it started.

  To resolve this issue for good, I decided to format the HARD drive using the HDD recovery procedure. Unfortunately, I had to cancel this procedure after 2 minutes, and the start-up is not possible at all since then. He continues to display the message "Boot failure" etc. and staging to the BIOS screen. So, I can not access the recovery procedure even if I keep the F8 key. I am afraid that a recovery on the HARD drive partition can have been damaged due to the forced cancellation.

  I have not created a DVD of my own laptop recovery, and the only option seems to buy one from Toshiba (https://backupmedia.toshiba.eu/landing.aspx). Before you order a recovery disc, I would ask if my problem can be solved using the disc. Anyone who has experience with the recovery disc could advise me? Another question is to know if a standard warranty let me send to Toshiba ASP? Thank you for reading.

  Hello

  > Another question is to know if a standard warranty let me send to Toshiba ASP?
  Warranty only covers hardware issues.

  Question you seems to be related to a software problem.
  Therefore, I doubt that installation of the OS would be covered by the warranty.
  You should order the recovery disk and must attempt to define the notebook back to factory settings.
  Then you should check the features of the laptop.

  Good luck

• No updates for AT300-101

  I have an AT300-101 and the android version of this powerhorse is always 4.1.1.xxxxx, no updates, why?

  I begin to develop android applications, turn the debugmode usb and nothing! I am running windows 8.1 x 64!
  With my nexus4, I plug in the usb cable and 'voila! ' I get the device ready!

  What are you,
  TOSHIBA PEOPLE, wake up!

  Daniel Reis

  This is the forum user.
  I don't think you will get more information and details about the philosophy of update of the members of the forum and lovers of Toshiba.

  But the fact is that the updates are available through gas station and Toshiba provides updates for various devices.

  I m owner again excite Pro and yesterday I received a Jelly Bean 4.3 update

• Problems of his AT300-101 Tablet

  Nice day

  Recently bought a Toshiba AT300-101 tablet 16GB 10.1 screen ". All good tablet, very nice indeed. Powerful hardware and an eye-catching operating system.

  However, after a few days, the noise stopped working completely. Even system sounds would not play. Nothing at all.

  We have tried everything, to adjust volume levels to plug in headphones, but the only way we could get it to play all sound was reset to the factory settings. It recovered all the sounds.

  A few days later, it happened again. We had a peek at the apps that we had installed, but only Facebook had been installed since the factory reset. Now it happens regularly, not even lasting a day without losing all the sounds.

  Any ideas? I really want to send it back for a refund because it is the best Tablet I've used so far.

  Thank you very much

  Hello

  Have you checked the Android updates?
  Start the gas station and check whether an update is available
  Would be interesting to know if it would solve the sound problem