AT489AV: Add additional drives to AT489AV
Hello
I have a Compaq AT489AV AUD025061R 6000 Pri format microtour
Win 10 64 os 4 GB (2 sticks)
1 hard drive, 1 CD Rom
I see 4 ports Sata 2 used.
I want to add more than 2 player. I guess that 1 in the Bay just above the active player and the other in the upper Bay just below the CD-ROM drive.
Problem is that I don't have the bolts that hold the drive to the cage or a tray to hold the player in the box under the CD-ROM drive.
Where can I get these bolts Silver/Blue and the tray?
Also for me the RAM can't I just add a 4 or 8 to the already 2 x 2 or will I need a different config?
Thank you
Oz
Hello:
4 x 4 GB PC3-10600 memory max memory for your PC, you can add 2 x 4 to your existing 2 x 2.
It's the memory that I used for mine...
http://www.Newegg.com/product/product.aspx?item=N82E16820220480
Can't help you with the set, but you can get the screws anti-vibration on eBay...
Tags: HP Desktops
Similar Questions
-
Hello
I bought the HP ENVY 15-as032nr with only 512 GB SSD laptop. I want to add additional 1 to hard drive. Can it be done?
Yes, you have the 512 m2 NVME PCI - e (lucky) drive gig and that goes into a slot and then there is also a slot open for a standard hard disk 2.5 thumbs or SATA SSD. See pages 30-33 of the manual here:
It is likely that your laptop does not contain the HDD mounting kit and cable as shown on page 30 and 31 and this note is in the Manual:
The disk spare parts kit hard does not include the rubber hard drive support or cable hard drive. The hard disk rubber support is available using the spare part number 857797-001. The hard drive cable is available by using the spare part number 857806-001
An extra $ 66 for the housing and the cable seems a bit strong, but I couldn't find their sale anywhere other than HP Store.
This isn't a simple upgrade; If you need assistance.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Qosmio G30: How to add the driver RAID without floppy drive?
I'll put win xp tomorrow, as far as I can remember I will be asked to insert a floppy with additional RAID/SCSI drivers - I guess I need some drivers for XP see my RAID stripe.
I was able to download 'raid-drv-qog20-xp - 1380.zip', but I'm afraid to look if my laptop has a floppy drive... How can I add the driver did not have a floppy drive?
Hello
Maybe a stupid comment, but if you can buy Qosmio G30 I presume that you can also get a used floppy disk. I did this a few times with Vista and Qosmio G30 and it works well.
Check eBay. You will get the drive used for a few euros. Otherway tries to create CDs and if the RAID drive must travel to ODD, I didn't try because I have a FDD, but you can test it on your Qosmio.
-
We try to add a drive on our new TD350 to a RAID5. This was previously created and works very well. There are two additional disks available.
How can we add those toes RAID5. We find no option in Deployment Manager. Or we found no documentation on the Deployment Manager itself.
The server starts in mode UEFI and shows not all guests for the RAID Bios.
It's the whith modell AnyRAID 720ix adapter.
Good to hear. Glad you figured it out.
-
Add additional sata disk to pavillion m9400t elite
Hello, I have a HP Pavilion Elite M9400T desktop computer. I'm on the disc and you want to add an additional hard drive. The case of the opening, I found that the two slots of the disc already have records in them. I also found that SATA0 and SATA2 ports have taken in them and they are attached to the hard drive. I found that the SATA4 port is empty and this is where I want to connect the additional disk. I bought a Western Digital Black 2 TB 3.5 hard drive and buy an internal matter for mounting the drive in the empty 5.25 bay under the optical drive. I also need to buy a SATA cable and adpater cable drive power. Did I meet problems getting the systΦme can recognize the added disk? Are there things I should be aware of I have install additional drive? Thanks for the info.
The "T" of the HP Pavilion Elite M9400T designates a custom configuration. These can be found here.
Based on your post, your system has a RAID0 (spans 2 discs) or RAID1 (mirrored), which
(A) 2 x 500 GB drives in RAID 1 (helpful 500 GB storage capacity)
(B) 640 (2 x 320) GB, RAID 0
(C) 1 TB (2 x 500) RAID 0
So, what's your configuration?
Add the 3rd disc system is simple, and your logic is correct. Installation, connection and format.
The system is 5 years old (readers have a limited duration), you may be eligible to advance the survival rate by installing the new drive as primary and the old records of retirement.
-
DW freeze_Unable to add additional browsers
Hello!
I'm unable to add additional browsers in Dreamweaver in order to test the practical /review of coding. I hear that boing dreaded as a warning and then my screen completely freezes. Pls see attached screenshot. How can solve this problem to make what should be a simple task?
I'd appreciate any help I can get.
Thank you in advance.
Steve
Just ask additional information here, but don't you have attached to the system that DW may be shifted upward on all media? External HDs with non-native filesystems for Mac, mapped network drives, flash cards, etc.? I had some problems in the past with file systems mapped applications seen as discs or a place to find files but could not read them (and death).
Apart from this, please add more details such as what browser (s) you are trying to add, if they are installed in typical places, what level of your user account is (Administrator/user/etc), OS version and where 'exactly' you have the problem (when you open the dialog box add himself, when you browse the file system selecting and pressing 'ok', etc.).
-
So I currently have a script that has the followning variables
$HDD1 = "20".
$HDD2 = '0 '.Here's a snipit of my script code. $HDD1 and $HDD2 add the VMDK based on the model that I use. There may be a time when I need an additional drive, once again, that I may have need for two additional discs.
If I didn't need $HDD2, I prefer to scratch as a way to define what is not in use.
Now, if I run my script and put $HDD2 = 0 as shown above. The successful full script and only adds $HDD1 as I hoped, but powercli it does not display errors related to 'invalid value passed to SizeGB' he doesn't like '0' for $HDD2
I wonder if I should just add this to the line below pertianing to $HDD2? -ErrorAction SilentlyContinue
Or is there a better way to deal with this?
Thank you!!!
$vm | NumCpu ($cpu) - set-VM - confirm: $false
$vm | New-harddisk - CapacityGB $HDD1
$vm | New-harddisk - CapacityGB $HDD2
$vm | Set-VM-Notes $Note - confirm: $false
Start-VM - VM $vmnameNothing of a Where clause can not correct
Get-Variable -Name HDD[2-6] | where {$_.Value -ne 0} | %{ $vm | New-HardDisk -CapacityGB $_.Value}
-
adding additional drives in the application process
Hi, how it is possible to add additional disks in the application process? Now, go in the settings of the virtual machine in vCenter client to add disks after the virtual machine has been created in LCM. We take for the applicant specify how many additional disks and what size (just not RDM VMDK)
Thank you
It can get quite complicated because this is certainly not the standard features of LCM and would not be supported by VMware if this customization is not performed by the team of the Orchestration Services of our Professional Services organization... However, that being said, a general approach would be as follows:
Duplicate the workflow application for Virtual Machine to the category of workflow custom under user and give a custom name like ask VM
Add new entries to the custom workflow that are something like: additionalDiskCount (number) and additionalDiskSize (number) (which implies that all the additional disks would be the same size)
Update the workflow to store these values by using a standard LCM Action such as:
System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskCount, "additionalDiskCount");
System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskSize, "additionalDiskSize");
The two lines above will store the specified user to other values that the token of data in the database of LCM and you will be able to get it back later because it is related to this particular request token.
Hide the initial request button of the tab requests and create a new button that points to your custom workflow
Create a new workflow that takes an object of lcm:ProvisioningToken as an entry called "token".
Inside of this workflow (let's call it 'Add disks to ask'), you will need to retrieve the additionalDiskCount and additionalDiskSize values that have been stored with the token:
additionalDiskCount = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskCount");
additionalDiskSize = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskSize");
You then get the object of VMware3:VirtualMachine of your token:
VM = System.getModule("com.vmware.lcm.vim3").getVmFromToken (token);
Then, using those extracted values and the virtual computer object, use a loop to pass these parameters and some other default values you want in the workflow 'Add drive' (it's in the category library/VIM 3/Virtual Machine management/Device Management workflow.)
Once you have confirmed that this new workflow 'Add disks to ask' is working properly by passing only an object token with these entries of additional data stored with them, you can add this workflow for the reminder 'onCreate '.
The above process is a general approach that could be taken. The specifics of real workflows that you create are up to you and the support of this customization
Good luck!
Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials
-
So here's what I have... Windows 7 - & gt; VMware Server 2.0 - & gt; Windows Home Server virtual machine
Trying to add additional hard disks, see just plugged and windows 7 (host), but when I try to add a drive to the virtual computer it shows me only the available pool from the original hard drive... Im sure that I add these drives to the host via the applet web but just can't figure out how? If anyone can help... thx!
Looks like you need to add a new data store to take advantage of the space on these new readers. Ensure that any data store that you add is available when the VMware services beginning, like at the start, especially if you have virtual computers autostart stored on them.
Guy Leech
VMware vExpert 2009
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
can I add additional e-mail addresses to my icloud account
can I add additional e-mail addresses to my iCloud account or do I need a new account for each address iCloud?
See here - iCloud: create or modify e-mail aliases
-
How to add additional information to the files of the House
Is it possible to add additional information to home video and TV shows/movies that I imported my self not that store from iTunes.
I did some research and it seems that you can use a third-party software to do.
-
I don't know how to add additional devices to my list of "trusted devices" in my Apple account. When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device"; There is a button to edit, for example. deleting devices, but I can't, or I do not understand how to add my other devices to my approved devices - but is anyone know how to add my Mac and iPad to this list?
Download a purchase on a device should associate this device with your Apple ID take a look at this.
-
ModifyReportEntry add additional data
Hello to all Experts Teststand,
I am developing system of automatic test of electronic components.
I use TestStand 2014 and 2014 LabVIEW. I'm generating the report in XML format using horizontal.xsl to view the report.
I am trying to add additional data (for example name these 'StepDescription' data) to my report in the body of the report. I found information on how to edit the xsl file to add a new column to the report table (using BeginTable) and set the type of the step to which the present new data (search for "ADD_COLUMN_DATA_
" in the file xsl. It is done and works very well. Now, I have to add my data to the output XML file so that the xsl can display this data in the new column "StepDescription.
I use the ModifyReportEntry callback to add my data to the report string. Here are my problems:
1. I noticed that the ModifyReportEntry callback called any that I ran my sequence. I am generation my report in XML format. In the report option, the box 'Select a report generator to produce report body' was grey, so I can't select the checkbox 'Sequence '. Is this normal? If it is gray out, what should I use (sequence or DLL) to generate the body of the report for the XML output format?
2. If you can help me solve the problem in 1., then there is another problem, that is, how to record "StepDescription" data to the result database? I ask this because if I use the "additional results" a step to write the data in the database, it will also appear on the report (as attributes of the property). How can I write the data from the database using 'Other results' without him printing again on the report (as data already appears in the column "StepDescription").
Thanks for your help.
Yours,
chati
As described here, ModifyReportEntry only works for HTML and ASCII reports.
-
Ideas:
- I have a dell studio laptop and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook
There SR 780 chip and also I could not find any housing emty external or internal to a 3D support
Help, pleaseRemember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi waheedkhan
Welcome to the Microsoft Answers Forum!
To install additional video card for laptop is not possible as desktop, as the video card is integrated with the motherboard. However you can contact Dell technical support if they can provide an additional location for add video card. Here is the link to the support technology guide below: http://support.dell.com
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How can you add additional Google accounts without doing a hard reset?
I can't add additional accounts of Google. I created another account Google using my PC and I am trying to add from the Menu--> Settings--> accounts--> add--> Google account and by signing then to my new Google account, but it won't let me. It keeps saying "cannot establish a connection of reliable data on the server. I have 3G coverage full where I tried to add the new Google account and tried to add other places as well. I have 'data base' are checked, as well as "Data roaming" within the parameters of the data delivery. I read in another thread that you may need to do a hard reset and then add all your Google represents both. That seems pretty extreme. Are there any other way to add a Google account, once you set up your main Google account days before?
Maybe you are looking for
-
How to block pornographic images is displayed in the image search
When I do a search for a person and then select a display of images for this person, I get a variety of porn images rigged this person mixed on the screen. I think that at some point I turned off a filter, but now I don't know how to turn it back on.
-
How to remove UK Union Jack now exceed the Olympic/Paralympic Games?
Before the Olympics, you suggested that we add our team flag as the background for the toolbar, etc. It was a simple click and I guessed that she would automatically go to the end. But its always there, a little boreing and I would like to change it
-
CD/DVD drive, it is not supported by Windows XP and Bios
I bought a new Mat * un Panasonic cd/dvd player.It only works on Windows 2000, it is not supported by Windows XP and Bios, so I can't start with.
-
Windows xp... 978542 KB
Windows xp... updated security KB978542 guard download again and again and stop OE from loading. I am unable to get my email address unless I have cancel the update.
-
KB2572073, KB2633880 & KB2518864 updates failed to install.
Page of Updates of the MS (history) shows that the updates were installed THREE times again the yellow shield ("updates") is always telling me to install them. Secunia members reported this (http://secunia.com/community/forum/thread/show/12677) as a