Atheros AR5007EG Wireless Network Adapter does not

Similar Questions

• Atheros AR5125 wireless network adapter does not

  Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too

  Any help, please notify!

  JudyB_729

  Judy

  What operating system do you use?  I would like to move to the section appropriate for your driver problem, but can't until I know.  BTW this section isn't for comments etc site technical support

• My Atheros AR5007EG wireless network adapter will not work

  I have an Acer Aspire One AOA150ZG5 that only comes with Windows XP directly from the factory. I recently started having trouble with XP so I switched to Windows Vista Home Premium and now my wireless card doesn't work. I tried to go to the manufacturer's Web site, but they have only taken over XP, so I installed the XP driver and used the Vista Device Manager to update and it still does not work. Please help me I spent all my money on vista so I can't afford a new wireless card.

  If Acer is not taken support Vista for your model, there is nothing that can be done about it.

  Sorry about that.

  You can consult the Web site of the manufacturer of the wireless adapter.

  If they have no drivers Vista, same thing; nothing can be done about it.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Changing the settings of the WLAN with an Atheros AR5007EG Wireless Network Adapter running on a Vista computer

  How can I set the preset wlan on ONE for an Atheros AR5007EG Wireless Network Adapter running on a Vista computer.  Currently, the default is OFF and I need to use the Fn F1 to bring up the option to turn it on, Iwant my laptop to connect to my wireless router automatically without having to do that.

  Thank you

  Hi Cath.

  In most cases, it is a configuration in the BIOS of the laptop that will solve the wireless by card.

  Then start the laptop enter in BIOS and look for an entry that configure the wireless to be all the time card.

  Where necessary the manual or computer support site must have the necessary info.

• How fast is the Atheros AR5007EG wireless network adapter?

  I have an Atheros AR5007EG wireless network adapter in my computer. For six months, we have Broadbank 100Mbit/s in our House. When I call the support (support of the broadband company) they ask me to check if my computer can handle it. How can I check that?

  I think the Atheros AR5007EG is a 802. 11 b / g device. Which would have a maximum speed of 54 Mbps.

  For 100 Mbps, you need a Wireless N - 802.11n device.

• Windows Vista Home Premium Service Pack 2 upgrade of the Atheros AR5007EG wireless network adapter

  I just bought a new device Sierra Wireless mobile hotspot, the Pro of the Sprint Overdrive.  The wifi connection works very well in my PC with the exception of a PC set that I am running Windows Vista Home Premium Service Pack two.  I am told that the problem is with Vista and the Atheros AR5007EG wireless network adapter.  The current version is 7.6.0.164 and it tells me the device Overdrive only with version 9.1.0.328 or higher will.  What I can, and if I can, how to move the driver to the required version?

  Hello

  You can try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Satellite P300 PSPCCE: Atheros AR9281 wireless network adapter are not all networks

  I have a Satellite P300 PSPCCE with Atheros AR9281 wireless network.

  After a clean install of Windows 7, I can't see wireless networks, unless I connect an Ethernet cable to my wired network card.

  As soon as I take the cable on wireless networks disappear. This computer had Vista and it worked fine there. I tried latest drivers available from Toshiba, but that makes no difference.

  I have tried disabling the wireless and turn market as well with the FN and F8 key and switch on the front. I also tried to uninstall. But it's always the same.

  If someone has had this problem and is there a solution to this?

  Bjarni cordially

  Hi mate

  To be honest I never did experience even with a WiFi card and I have no idea why the LAN cable affects WLan card functionality, it makes no sense to me!

  First, I recommend that you check the settings of the router and reset if necessary
  In addition, you should go to the s for laptop BIOS settings and set its default value.
  Check the version of the BIOS if newest is available, then an update would be worth a try

  You use the Atheros Wlan configuration tool?
  If this is not the case, try this out!
  It s a configuration tool that could be used instead of owning windows wlan settings

• S3-391 Acer wireless network adapter does not work after driver update

  Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

  And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

• Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

  I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

  I tried:

  Atheros Wireless LAN Driver 2011

  I saw someone talking about DriveTheLife in another forum and decided to try it.

  IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

• Satellite L50-B-1DZ - wireless network adapter does not work

  So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".

  I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.

  I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.

  How have you tried to update the driver WLan?
  Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?

  Try it!

  You said you reset the system in the past?
  How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more?

• Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

  Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

  However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

  Can someone please tell me why this keeps happening and how to fix it?

  original title: unable to connect to a network.

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode with networking

  Start your computer in safe mode with network and verify that the question.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps.

• Wireless network adapter does not not for Pavilion DV6000

  My Wi - Fi just stop working and I can't connect to my wifi at home more.  When I click on the wizard wireless in the Panel, nothing in charge.  Wifi switching active button disabled, shows nothing on the screen (which it used to) went into the Device Manager and says "this device does not work properly because windows cannot load the drivers required for this device" (code 31)

  Ive shut down the computer and a restore of the system for a few days before the show but has not resolve.

  Any questions/possible solutions? Thank you

  Try this driver and see if that fixes the problem.

  Vista:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_88727_1%257CswEnvOID%253D2103%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  XP:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_101092_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Atheros AR5007EG Wireless network adapter not working do not after Windows 7 installation

  After a clean install of windows 7, Driver atheros wireless AR5007EG network card button no longer works. As a result not able to connect wirelessly. I first upgraded to vista, but did not uninstall norman antivirus, which gave me a few problems. Impossible to uninstall or update any longer, so I decided to install win from scratch. Anyone know how to get my wireless to work. PC is Fujitsu Siemens, about 2 years.

  The driver has been updated and status is installed, the problem might be that the wireless button no longer works, so I'm not able to turn it on. Is there a separate driver / settings to do this, or is it included in the wireless driver.

  You can find a better driver for your Atheros AR5007 at http://www.station-drivers.com/page/atheros.htm

• Wireless network adapter does not work

  I get the error 10 and 31, and it won't let me access the internet

  Hello

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Check the site of the manufacturer of the system for latest driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.