Atheros AR9285 802.11 wireless card does not work.

Similar Questions

• Satellite P750 - wireless card does not work

  PSAY3A - 02q 001. Laptop is around the age of 20 months. Turned on this afternoon and the Wireless does not work. Atheros AR9002WB-1NG. Can't b on / off switch material. The switch will beep when pushed. Network troubleshooting indicates the card is not activated. Card is always detected in windows.

  I feel that this indicates that the card has failed. Any thoughts?

  was soon Simon

  > Card is always detected in windows.
  Does that mean exactly?
  WLan is listed in Device Manager?
  And if SO, have you tried reinstalling the WLan driver again?

  If you tried that, do it!
  Uninstall the Wlan driver (in Device Manager), download the latest driver WLan driver Toshiba page, install the driver, reboot the laptop and try to set up the connection.

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Satellite L300-17N (PSLBCE) - wireless card does not work

  Hello

  I recently bought a Toshiba Satellite L300 (PSLBCE) that came without any operating system and the dirvers. I installed WXP PRO SP2 above and downloaded all the drivers from the Toshiba site. Everything has been installed ok and functional except for the WLAN card. The wireless network card, it is a Realtek RTL8187B but it is not recognized by my laptop: if I Check Device Manager it does not appear (it does appear that "Network controller" with yellow mark). Then I went to Realtek website and download new drivers from there and installed again... also with these dirvers WLAN card still not recognized.

  No idea this coud be the problem? I don't know that I have downloaded the correct dirvers from Toshiba Web site as well as the Realtek site... but none of them helped. The chipset drivers have also been installed and also the last BIOS version (my BIOS version is newer than the one on the site of toshiba with the drivers for this model)
  May this be a conflict with the other dirvers or WXP PRO SP2?

  Thank you

  Hey Buddy

  Satellite L300-17N does not support Realtek RTL8187B but Intel 11 a/b/g (13ch) - Golan Wlan card.

  I recommend to visit the portal of Toshiba Europe WLan and recommend to download and install the driver Intel WLan from here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Here, you can try the Intel PRO/Wireless 3945/4965/5100/5300 driver package!

  I would appreciate your comments

• Satellite Pro 4600 Wireless card does not work with WIN2K?

  I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

  The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

  But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

  the router works well with other laptops in my house.

  I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

  'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

  What I then please? It works with Win2K, is it "another driver" and so on?

  Thank you

  Hello

  I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
  Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
  Please see this page:
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

  In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
  You should check your WLan settings again.

• Satellite Pro L300 - wireless card does not work under Ubuntu

  Hi all,

  I want to know what is the model of my wireless card. I need to know because I need the driver of windows for Ubuntu. I see on the internet for the L300 series, we have a lot of wireless card... I want to know what is the card of my pc.

  Thanks a lot and best regards

  LOL: D you're funny type. Please don t do it harder they are.

  There are many opportunities to find out what card WLan has been inserted.

  The easiest way is to check the bottom of the unit.
  There are a lot of different labels and on one of the labels you should see a WLan card model or part number.
  Take this number it in the google search and google for this field.

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• Qosmio G50 802.11n enabled but does not work properly

  Hello

  I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

  -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

  can someone help me?

  Greetz

  Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

  Access device wireless LAN settings in Device Manager to change these settings.

  Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Wireless adapter does not work.

  Original title: wireless

  I install win7 in my fujitsu siemens AMILO Li 1718 model system, all the drivers are installed but I have problem with my wireless, wireless is not see the amything all available wireless driver is installed courrently can someone help me solve this problem

  Hi Amy,

  It seems that your wireless adapter does not work.

  There is no Windows 7 drivers for your model. You can check this link for simple information.

  http://support.TS.Fujitsu.com/download/ShowDescription.asp?SoftwareGUID=689AC3EC-583D-4B7F-8D1A-CED2F9D7EED8&info=FTS

  I suggest you to visit the above link and download Vista drivers for your wireless card. Install them in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows.

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Fujitsu support:

  http://Forum.TS.Fujitsu.com/forum/viewforum.php?f=89&SID=1856691d77caf93b0cf1e8058e951cd4

  I hope this helps.

• "Wireless radio does not work" when the Diagnostic tool is run

  Recently, I unplugged my C309a HP Photosmart Premium and he moved to a new Tablet next to my main computer.  Wireless network card works perfectly before the move, and now it does not detect networks to connect to.  I have run the wireless network test report and it says "Wireless Radio does not work.  Contact HP support. "I can do here to help solve this problem, or I have to pay for repairs somewhere?  I want to believe that this HP product can support more than a simple passage of one shelf to another...

  Any suggestions would be greatly appreciated!

  * Note * I know my network works correctly (because I'm connected to it now...).  My computer detects my network as well as several others in the neighborhood.

  Is the printer still under warranty?  If yes you can not he repaired, but it can cost almost what a new printer costs.  Here is how to contact HP.

  Your printer must be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.

• my wireless keyboard does not work with windows xp

  Hello

  I installed osx el capitan yesterday.

  My wireless keyboard does not work when I'm on windows xp. For the mouse is ok.

  And no problems with OSX el Capitan.

  Thank you very much for the help.

  Boblecingle

  Windows XP is now fifteen years old.

  Are using you it on a Mac somehow, for some reason any?

• Graphics card does not work on the Satellite L850 PSKFWA

  Hello

  I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
  I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

  I haven't noticed any problem with the graphics.
  It may be a Radeon problem, but what I have on my system, which was installed at the factory.

  Thanks for everything back
  Hetty

  + The message was edited: model nr. Add the object +.

  Can you please tell us once more what model of laptop you have exactly?
  Are you using the original Win8 preinstalled?

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?