ATI Radeon HD 5570 woes...

Similar Questions

• Connect a second monitor to ATI Radeon HD 5570

  Hi, I just got my HP Pavillion Elite PHE-360z and it works great so far.  My question is that I have two monitors that I would use with the card.  The first monitor is hooked up okay using the DVI connection.  However, the card has also 2 other slots and I don't know what kind of cables go inside.  Looks like it is HDMI and don't know what the other is.  I have a simple cable VGA to my screen else I want to connect to this card, but do not know how to do it.  Any advice would be appreciated!

  Tim

  This article should help you with the connection of two monitors.

  Another your monitor handles other types of connection next to the VGA?

  The video for the HPE-360z 5570 card has DVI, HDMI and Display Port.  You must also have a VGA to PC adapter.

  A Display Port to VGAshould get the VGA signal to your second monitor.  I have not tried this type of adapter.

• HP Touchsmart 610-1015XT with ATI Radeon HD 5570 blue screen and no display

  Can someone show me how to disassemble this system to replace the graphics card?
  
  Thank you

  Hello @Kelly610,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you're looking for disassembly instructions replace the graphics card on your desktop computer, and I'd be happy to help you in this case!

  To replace the MXM card on your computer, please follow the steps below:

  1.) remove the cover of the USB Dongle, ensure that the rear latch is locked when pulled down.

  

  

  2.) remove the rear Cap right

  

  3.) remove and lift the left rear Cap

  

  4.) remove the stand from the rest of the all-in-one

  

  5.) T-back of the cover

  

  6.) remove the cap on the left side and separate the audio connector on the speaker unit

  

  7.) remove and lift the shield of the motherboard

  

  8.) remove the thermal module

  

  Undo 9) the two screws indicated by the screwdriver on the two figures below. The installed graphics card should pop up and stand at a 45 degree angle.

  

  

  

  Remove the plug from the socket MXM 10.)

  

  11.) to replace the graphics card, it corner at a 45 degree angle and press down. Hold the key while turning the first screw; and then the second.

  

  Please re-post with your diagnostic results, and if you have any questions or concerns with disassembly I would be happy to respond. I look forward to your reply!
  
  Concerning

• Pavilion Elite HPE 450 t: replacement ati radeon 5570 what info I have to shop with

  Hi, my ATI Radeon HD 5570 has pretty much gone for good.  I want to to replace it with something equal or superior performance... but I don't know what I'm looking for when it comes to choosing the size, power and others.   I'm running the 64-bit Intel i7 system and get really confused looking at the descriptions of the video cards on different sites.  Can someone point me in the right direction?

  Thanks in advance.

  Hi Eddie,.

  The AMD Radeon 5570 has been very good graphics card in his time.  Your old PC need a graphic card HP legacy which could mean the purchase of a used graphics card.

  The 6850 AMD or NVIDIA TI 550 would be a good choice for a replacement.

  Do a little measuring inside so that you know how much room is available for a replacement of the graphics card.  Find out what the return policy is before you buy.

• Compatibiliy memory DDR3 memory DDR5 for new ATI Radeon HD5770 Vid card

  ATI Radeon HD 5770 interfaces with memory ddr5. IHAVE an ATI Radeon HD5570 now, my computer uses DDR3 sdram. Y at - it DDR5 ram in addition to DDR3?  Can I install ati radeon 5770 5570 instead and be ok if I RAM DDR3 and HD 5770 "interfaces" with DDR5 memory?

  Hello

  Your graphics card ram is independent of the RAM on your motherboard, so there is no worry of conflict arising - my pc using DDR2, but my graphics card has DDR5 aboard.

  I hope this helps.

  Best wishes

  DP - K

• A Dell U2414H can work with a mac Pro 3.1 (10.9.5) and an ATI Radeon HD 2600 XT?

  Hello

  Here's my dilemma. I recently bought a Dell U2414 as a 2nd monitor to replace my old 2407FWP Dell (has died) with the understanding that the new monitor would work (via a DVI to mini displayport cable). I bought a high quality 3rd party DVI to mini display port cable. Obviously, the monitor does not. I can't get a direct Dell response if this will never work. My hunch is the graphics card can not simply to manage this monitor and it won't work with my system.

  FYI: I also have an old DELL G2210 (resolution: 1680 x 1050 at 60 Hz) on the other DVI port. So I'll still need a DVI port.

  Here are the current video card info:

  ATI Radeon HD 2600 XT: VRAM (Total): 256 MB

  Here is my Mac info (on 10.9.5):

  Model name: Mac Pro (early 2008)

  Model identifier: MacPro3, 1

  Processor name: Intel Quad - Core Xeon

  Processor speed: 2.8 GHz

  16 GB OF RAM

  Firstly: If someone can give an answer as to if the monitor works with this graphics card, just to settle this matter and move?

  Second, assuming that no, my choice appears to be:

  1. return the screen and try to find another 24 "that will work with the original map (someone there suggestions for what is currently still deployed that would work with such an old graphics card?)
  2. upgrade the map so it can handle the new monitor but still run the old.

  I chatted with OWC on this subject and they suggested 2 possible upgrade cards but they will not be returned since they could not guarantee that they will work with this monitor there is a risk.

  Dell has been pretty useless (I have no one said yes, the other doesn't).

  Here are some suggestions from OWC (see below). Can someone comment and tell me if or the other will definitely work or offer another solution? I would really appreciate it!

  ATI Radeon HD 4870

  https://eShop.MacSales.com/item/Apple/MB999ZMA/

  Or more likely: ATI Radeon HD 5870

  https://eShop.MacSales.com/item/Apple/MC743ZMA/

  I know there are more expensive options (Saphire?), but I don't want to spend $500 for a graphics card on a 8 year old computer.

  Thank you!

  Best,

  Joel

  This is a screen with a displayPort, a DisplayPort outside and a Mini DisplayPort connector, in 1920 by 1080 max resolution.

  You are WAY overthinking this. A mini DisplayPort to mini DisplayPort or a Mini DisplayPort to [size] DisplayPort should do all the work for about US$ 10, no conversion.

  You don't need another card unless your is dead.

• ATI Radeon 9600XT

  I'm not having a problem, I'm looking for information.

  I have an ATI Radeon 9600XT 128 MB in my Mac G5 1.8 DP.  It has an ADC and DVI port.  However, everything I read says this card has a different arrangement of the output ports and was never used in dual processor systems.

  So... what gives?  How could it be in my Mac?  EC which could I really have?

  Here's a screenshot of my System Profiler:

  

  Did you buy this new MDD?

  I suspect also that was an upgrade option, as the 2.5 DP released at the same time had a standard 9600XT...

  http://www.EveryMac.com/systems/Apple/powermac_g5/specs/powermac_g5_1.8_dp_2.htm l

  http://www.EveryMac.com/systems/Apple/powermac_g5/specs/powermac_g5_2.5_dp.html

• Determine if ati radeon hd 5870 1 is Apple mac edition or flashed PC version

  How can I determine whether my ati radeon hd 5870 1 mac edition or not flashed?

  Bought a prerequisite 7950 and commercial card a refund.

  (has 3 stickers part numbers):

  2010 ATI-102-C07802 (B)

  P/N 102 078020 ATI Radeon HD 5870 1 GB

  P/N 7121C870H0G 124A1X)

  These seem to google versions apple, but it is clear to me.

  < image edited by host to remove the serial number >

  What are the output on the card connectors?

  The Apple card has two mini displayports and a dual-link DVI.

  Google search shows that a PC card has different ports

• Memory size incorrect notification in Windows XP for ATI Radeon Xpress 200 M

  I have a problem that keeps buging me:

  The thing is that I have a laptop Toshiba Satellite L20-181, with an ATI Radeon Xpress 200 M graphics card, which, on the toshiba site is specified to support up to 128 MB. After that I tried to configure the size of the memory for the graphics card in the BIOS, to a precise value, Windows Xp is not displayed correctly this amount of memory. I think that the graphics card has another source of memory, DDR2 RAM memory, but I'm not sure.
  Initially, I had a 256 DDR2 dim. After configuring the Ati card for a value of 32 or 64 in Bios, entering into Win XP, it displays a value of 128 MB SGDDR.
  Then I bought another 256 dim (I have 2 x 256 ddr2 dims now), and an additional value of 128 appeared in the BIOS. When you now set the value 32, Win XP shows me 128 MB SGDDR, and when you set the value of 64 or 128 I get 256 MB SGDDR in Win XP (which is impossible! because the ATI Board is supposed to support only up to 128 MB). This problem can also be caused by the driver. I installed the drivers from the CD of Toshiba, and I can't find another driver to work for her. WHAT CAN I DO TO MAKE WIN XP SHOW THE CORRECT VALUE FOR THE MEMORY OF THE GRAPHICS CARD? s ' Please help!

  Hello

  As far as I know you can change the size of the UMA (default) 32 MB maximum. 128 MB.
  This value, which you can change in the BIOS. I put t know where look you good value, but you should start to DirectX. Command: dxdiag.
  Here, you can do any graphics test and you can see the total graphics memory

  Good bye

• problems with ati radeon x 600 in dc7600

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  cpu201 wrote:
  

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  Hello

  I suggest to remove the card, reinstall the drivers for the integrated graphics card and using the onboard graphics for a week as a test.

  If the white screen start and stops disappear then you have found the culprit.

  If you do not need higher resolution graphics, you are definitely better with the embedded video solution. I suggest using the original drivers.

  What dc7600 do you have? (CMT, SFF, or ultra-Slim form factor are the three versions)

  Best regards

  ERICO

• Drivers XP for Satellite P305D-S8828, ATI Radeon 3100

  Hello

  I just installed XP SP3 instead of Vista on my Toshiba Satellite P305D-S8828. But now, my problem is that I can't find a driver for the video card Ati Radeon 3100. I searched Toshiba Download Center, ati download center and I googled for a few hours, but without result.

  Any idea where I could get the driver?

  Thans,
  Dan.

  Hello

  AFAIK that ATI Radeon 3100 graphics card was also installed in other laptops.

  For example, the card has been installed in this European series from Toshiba:

  Satellite L300D PSLC8E
  Satellite L300D PSLE8E
  Satellite Pro A300D PSAK9E
  Satellite Pro L300D PSLC9E

  Check the laptop series above and maybe you will find an XP driver.

• Need driver more recent card ATI Radeon 3650 - Satellite Pro A300-1NT

  Hi all

  I'm looking for the latest drivers for ATI Radeon HD 3650 onboard Satellite Pro A300-1NT.
  During the game, Transformers: Revenge of the Fallen game (2009) by Beenox Inc.... I get squares pixelated on the screen (instead of dust) and possibly a blue screen.

  I use Windows XP Pro
  I searched drivers * Toshiba site * and the only one that I found are:
  01/12/09 Display Driver ATI Windows XP 8.477

  * Support game * suggests upgrading driver for a newer version.

  * Ati manufacturer support * have driver for ATI Radeon 8650 but not compatibile with Solution Mobile - and asked for Mobile Ati support I got the Transfer:
  + AMD for ATI products customer service does not provide direct technical support for computers laptops/notebooks this moment (by phone or e-mail). If you need live technical support please contact the manufacturer of your laptop/notebook computer system. +

  + [http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx | http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx] +.

  I ask then is there latest drivers for Windows XP

  Hello

  I think you have already answered that question yourself...

  As you wrote that you can get all the drivers on the Toshiba site and if it isn t a newer driver available you can nothing more I think. Satellite A300 isn t a laptop of game performance so I think that the display drivers are not so important.

  The only way to obtain a more recent version, it's looking on external Web sites. Maybe you can get the desktop pilot working had some changes I put t know but really attention! Other drivers don't have protection against overheating and you could destroy the graphics chip. Be very careful of what you do.

  Alternatively, you can search on the Toshiba site for other models of laptops with ATI card too. Maybe, you can get a newer version

• Mandriva Live and Mandriva 2006 or Ati Radeon Xpress 200 M graphics card

  After installing Kubuntu, wich works nice on my L20-155, I want to try to install Mandriva 2006 or Live of Mandriva.
  The problem is the graphics card (ATI Radeon Xpress 200 M). With which the map is compatible.
  In the settings I have test VESA-VGA-sVGA, but no luke.
  If someone had more luck
  thankssofar

  Hello

  Have you checked the page Web ATI for Linux drivers?
  Try google a bit in Linux forums.

  PS: I found this site to info Linux on the Toshiba page:
  http://newsletter.toshiba-tro.de/main/
  Here, you can compare a configuration and compatibility options.

  But you must know that Toshiba supports only the Microsoft OS, and there is no guarantee that the various Linux distributions will work properly

• Where can I buy the new ATI Radeon 3650 for Satellite A300D mobility?

  Hi all

  very simple question, where can I buy new unused mobility graphics card Ati Radeon 3650 for model toshiba A300D - 16Q, omg help me pls, thanks ;)))

  Very simple question for you, but not just for the members of the forum.
  For desktop computers, you can purchase almost all hardware, but for mobile units, it's a bit complicated, especially if you need new motherboard.

  General graphics card is not available in the separate framework and what you can buy is any motherboard. You'll be lucky if you will be able to buy the graphics card used somewhere.

  You will be able to find the entire motherboard but the graphics card... it is not easy to find.

• SatellIte A100-220 - ATI Radeon Xpress 200 M Driver update

  Hello

  I have a laptop Toshiba SatellIte A100-220 and I can't find the latest driver for Ati Radeon Xpress 200 M, could you help me?

  Thank you in advance.

  What operating system do you use?

  I guess you know that you must use drivers from Toshiba support page. Have you already checked last version here?