Atrix: case

Similar Questions

• Interference case ATRIX Lapdock and phone

  Hi all, I use a strong enough case (Otterbox Defender) for my ATRIX. This case prevents the docking station, I have to remove my case to connect to my Lapdock. Can anyone recommend a sturdy box that does not interfere with the docking station? Or we could ask nicely Motorola to develop a short "coax" for those of us who use the case?

  Thank you

  Rick

  Welcome to the forums!

  This has been a topic of much frustration for some of the community of users. I think that people have indicated that the Otterbox commuter was compatible with all platforms, if you remove the dock adapter plate and the plastic plate lasts of the Otterbox...

• Anomaly of the Atrix car Dock recognition

  I noticed a quirk in the behaviour of my Atrix intermittent when I put it in the Dock of the car. The scenarios and the results are as follows:

  1. If I place the Atrix in car dock before I start my car (which provides power to the USB plug), the phone does not recognize the dock and is therefore not in car mode. If I take the phone out of the dock and put it in after the car was launched (and the dock is powered), it goes into car mode.
  2. If I start the car until I put the Atrix in the dock, the phone goes into mode car without fail. After that, the phoe seems not to care whether the platform is powered and will recognize when it is removed or inserted in the dock (probably because the application is still running in the background and yet was killed by the Androids Task Manager).
  This isn't a criticism, just an observation. Has anyone else noticed a similar behavior?

  I have the latest official firmware (point 1.8.3), spin not the task managers, and is the only application that I host monitoring State is the application of profiles of setting (Probeez). I use it to automatically turn on the Bluetooth when I put the phone in the car dock. In any case, I do that the phone is unlocked until I put it in the dock so I don't end up having hit to swipe a fingerprint to use the phone when it is in the dock.

  @xx089,.

  This has been noticed and mentioned in several discussions in this forum. The engineering team has been notified and if everything goes well it is addressed. However, if it bothers you that much, you can use a generic USB (not the motorola one that came with the dock) and it will work . Don't ask why . Or you can disconnect and reconnect the usb in the charger. I find it easier then unplug and plug the phone all the time.

• Bell (and other non U.S.) Atrix updates - release of v4.1.83?

  Hello team Motorola.

  I know that there was a previous discussion about the Atrix update for the version of Bell, but I would like to emphesize one the importance of support that do not receive the Bell phone buyers.

  In the last update published to users we AT & T:

  http://www.Motorola.com/staticfiles/support/us-en/mobile%20Phones/ATRIX_4G/us-en/documents/StaticFil...

  Better speed and a data connection has been inroduces and Skype very important (and other sound using apps) difficulty. I used Skype on iPhone to connect with friens and his family while I was abroad (usually on Wifi) but now I can no longer do it with my phone. The fact that there is a real problem that I did not is even more boring.

  In addition, e-mail messages do not appear in the Messages widget (which I love) bug has been fixed and I'd like to see on my phone.

  The Atrix Bell starts to become a very different phone than the AT & T Atrix and I would certainly not have such a difference, simply because I bought the phone at the Canada and not to the United States.

  Motorola recently said to have the best support for their devices after the separation of the mobility Department. I really hope to see this actually the case for all customers.

  Is anyone of Motorola can keep users in the loop?

  It will never be an update for the Atrix Bell? Is it is delayed due to the commit time? Is delayed by Bell or Motorola?

  Do you intend to release a big update after a few were published and validated in the AT & T model?

  
  

• Atrix gave me. And many other

  I found a topic in which a person of the Portugal complains its Atrix 4 g. He's no more. No matter what he does: master reset, master clear... In fact, he won't even a master reset because it does not illuminate. You can try taking the battery or any other attempt to turn it on. If you have something to offer, I'd like to hear, but it seems quite difficult to understand why Motorola has not taken measures to correct the problem. In Brazil, in a website called "Aqui advertising", something like "Complain about here", Atrix seems to be a champion in complaints about the same problem: its resistance to work:

  http://www.reclameaqui.com.br/1935247/Motorola-do-Brasil/MEU-Atrix-4G-desistiu-de-funcionar/

  http://www.reclameaqui.com.br/1368641/Motorola-do-Brasil/Motorola-Atrix-Nao-funciona-quebrou-com-10-...

  http://www.reclameaqui.com.br/1567293/Motorola-do-Brasil/Motorola-Atrix-NAO-comprem/

  http://www.reclameaqui.com.br/1448321/Motorola-do-Brasil/Comprei-UM-Atrix-e-como-outras-pessoas-com-...

  http://www.reclameaqui.com.br/1704345/Motorola-do-Brasil/aparelho-celular-Atrix/

  http://www.reclameaqui.com.br/1315577/Motorola-do-Brasil/celular-Atrix-Parou-com-13-Dias-de-uso/

  http://www.reclameaqui.com.br/1400664/Motorola-do-Brasil/Motorola-Atrix-desligou-Sozinho-e-NAO-Liga-...

  http://www.reclameaqui.com.br/1665614/Motorola-do-Brasil/Motorola-Atrix-2-apagao-em-menos-de-3-Meses...

  http://www.reclameaqui.com.br/1861473/Motorola-do-Brasil/aparelho-Motorola-Atrix-com-problema/

  Motorola should take knowledge of that. And correct the situation. I find it ironic that the inventors of Six Sigma are not able to fix their own products. Is not to say that it is something wrong.

  I'm glad you understand Portuguese, AlphaDog. It's just a shame you do not understand it very well. All cases involving the same problem. And they do occur not only in Brazil, but everywhere in the world:

  http://Forum.xda-developers.com/showthread.php?t=966071

  http://Forum.xda-developers.com/showthread.php?t=1334724

  http://Forum.xda-developers.com/showthread.php?t=1017679

  http://Forum.xda-developers.com/showthread.php?t=972672

  https://supportforums.Motorola.com/thread/51704

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/1350-Atrix-will-not-power-up.html

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/2608-wont-turn.html

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/1488-Atrix-wont-power-up-wont-charge.html

  I could try to find all the complaints about the same problem in all languages, mainly in English, is Motorola give some thought the problem and try to solve this problem, but, the response you gave me, and has held the official position of the company, is not what Motorola wants to do with this forum. The problem exists, you know, and you try to deny it.

  I managed to solve myself, after reviewing all those forums. When the battery is completely exhausted, only phone with the Motorola charger official charges, not with a USB connection or with the official Motorola charger for cars. When he has left fee it charges in any way. This is a bug, and you should fix it. Not deny it.

• Determining factor in buying the Atrix - SMS font size

  I have a sort of a time reading incoming and outgoing SMS on my iPhone 3G so it's time to upgrade.

  I like the sound of the Atrix and would like to know:

  The release of Gingerbread will allow font changing on the Atrix for incoming and outgoing text messages?

  Is there an "app" that who will now offer just in case where ir isn't?

  I've seen people write about Handcent but I'm not clear if it will do what I need.

  My view isn't ideal for heavy work, that's why I need to increase the font size.

  I'm open to other suggestions of phone Android if you think it will make a difference.

  Thank you.

  M

  I installed it on my phone to test and see and it works very well on the incoming and outgoing messages.

  moggi1964 wrote:Does this mean that incoming messages are not affected by the font change, do you know?
  

• 7 leather Apple iPhone case

  Just got the black leather for my iPhone case Black 7.  The finish on the leather is slippery in my hand, will be leather percent and easier to hold after a period of use?

  Hmm, probably not.  You can consider a case for Apple.  They resemble leather cases, but they are more sticky and have a more sticky feeling.  Good luck.

  Let us know what you decide :-)

• Leather case does not perfectly match iPhone 7

  I recently bought the Apple black leather cover for my new iPhone 7. After putting on the phone, I noticed that it is not firmly on the edges. I can hear the Squeak of leather when I apply a light pressure on the sides (this happens when you hold the phone). I compared it with leather for iphone 6s cases; they do not have this problem. For an expensive case it should perfectly around the phone. -What other people have experienced? Any statement of Apple? It is interesting to go to the Apple store for?

  Thank you

  Hello

  If you are concerned about a manufacturing defect, contact Apple support (mail service may be available) or make a Genius Bar reservation so that your case checked and, according to the decision of Apple, replaced:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Apple Watch series 2 protective case

  Hello

  Has anyone found a real Apple Watch S2 case? You are looking for a minimalist design, to display the watch itself without inhibiting its look, then perhaps a clear case (case bumper or other) will do.

  All cases online specify that they are cases Apple Watch S2, but look further into what they are not, as many of them do not account for the new air port (hole on one side, not two) and are also not the right depth, and cutting a port speakers are designed for S1 S2 not.

  You will need to protect my camera, I do use it in the gym a fair bit and worry about the damage.

  Thanks guys and girls!

  Hi RudeBwoy!

  I had the same problem. As far as I can see, case or bumper for the AW 2 series do not exist. I talked to Spigen, catalyst and a couple of others and any sites third 3rd say... manufacturers confirm that their AW products are NOT compatible with series 2 Watch, and that they are working on it!

  All thoughts of good screen protectors? !! They would be compatible? Some protection is better than nothing!

  Let me know if you hear anything!

  Thank you

• How can I download apps using iOS iPhone 5 s 10 and a waterproof case (without removing the case each time!)

  I have an iPhone 5 s protected by a waterproof case, secure screw using Allen.

  This command removes the possibility of using the ID of the contact.

  Contact ID is required by the App Store!

  I found a way around locking the screen, but not found how to circumvent App Store

  Have you disabled the following: settings > Touch ID & password > iTunes and App Store?

• iPhone 5 and 5s... same size iphone? Need to know about cases

  Does anyone know if the iphone 5 and iphone 5 s have the same exact dimensions? I buy a protective case and the description said 5s (only).

  You can get analytical information in the paper support. Identify your iPhone - Apple Support model

• E-mail account became case-sensitive?

  I have several email accounts on my iPhone and my iPad. One is a gmail account where I capitalized the first character of the email on the iPad (even if the gmail account is tiny everywhere).

  Recently, I changed the PW and, of course, has had to update my gadgets Apple with the new PW as well.

  No problem on the iPhone (7.1.2), but on the iPad (9.3.5) I'm stuck in a deadlock situation.

  He told me that I have to 'Enter the password again' and I get redirected to another page (web page?) where I get my new PW. However, he is rejected because "the user name or the IPL is wrong" which they are not.

  As I am out of the normal e-mail settings page (and can't get there until I asks me to enter the new PW again), I can not change the spelling of the user name.

  I came to the conclusion that some Apple update has changed the 'method of comparison of the name of the user' from case-insensitive to case-sensitive. I'd rather be changed to how it works on my iPhone. Or at least to find a way to change my user name capitalization, somehow.

  Any ideas? (Deletion and reopening of the account according to me, would be not a little practice, I would lose a few emails sent from the iPad, I don't)

  Hello. The web page is a login to Google to confirm the validity of your change. Your Google user name may be case sensitive. Maybe it's a change in security by Google. If gmail saves sent mail (I don't know), then deleting your account on the iPad shouldn't lose those who can not be recovered.

• IPhone smart case 7

  I recently bought the smart box for iPhone 7.  The costs of the case perfectly when connected to the charger by itself or when the phone is placed in the case, turned on and connected to the charger. However, if the phone is in the case, which is connected to the charger and the phone is switched off - only the phone will charge and not the case?  I want to turn off my phone overnight, but this way the phone will be charger but the battery case will not?

  Hi goblue2121,

  The reason its called a "Smart Battery Case" is because the case is able to detect when there is a phone connected to it and when that phone is drained. Once you wear the case, she just starts charging your iPhone depleted. If both devices are 100%, and you have the case, the phone will initially use the batteries in the case, and change to empty his own cell. If you turn off the phone while its in the case, the case is will not charge that she believes that the phone is drained.

  Recommendations:

  1. Charge iPhone and case separately.
  2. Activate low power on iPhone at night Mode.
  3. Turn on do not disturb & low power on the iPhone during the night Mode.

  The best

• Case, but the screen is still in

  Given that I've updated my iPad iOS 10.0.2, my case is no longer locks the screen to close it. The screen stays on. In my view, there is no option to activate this feature. It bother anyone else? No idea if they're going to fix this?

  They moved to / brightness of the display.

• Police in case of failure

  Is it me or are some areas are much too small after upgrade to Sierra?

  I tried to re scale, it increases simply other unnecessarily font sizes

  Not noticing a difference in fonts on the Sierra here.

  You may have a duplicate or a third-party font that causes a conflict with Sierra and Safari.

  Open the book fonts in your Applications folder.

  Then go to the menu bar of the font book and click Edit > search enabled duplicates

  If there are no duplicates found, return to the menu font book bar, click on file > restore Standard fonts

  Fonts not included in the installation of OS X system will be placed in a "folder of fonts (deleted) next to the fonts folder.

  Then, restart your Mac and see if that makes a difference.

  If this is not the case, a Safe Mode boot removes the system caches that can help after a update/uprade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then, check back fonts.