Attempt to activate debuggung. How can I do this? Using Windows XP Home Edition - Service Pack 3. I think it's 32-bit (could be 64-bit), whatever that means. I am desperate to solve this problem.

Similar Questions

• I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have a lot of problems.

  Hi all

  I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have loads and loads of problems. Windows keeps hung and everything I tried didn't seem to help.
  I brought this second hand from a company computer, I used to work and I don't have the original installation cd or rescue disk. I meet a lot of problems and everything takes forever to load and work. I was advised to run maleware, spyware, antivirus and defrag on the computer analyses and I did all that and nothing works. Also, when I tried to run the system restore it wouldn't let me, and when I try to run the scan disk after a reboot it does not work. As a last effort, I tried running SFC and it looked as if it was working, but then it asked me for the initial startup disk, that I don't have. so I tried to cancel it, but now every time that I reboot/restart my computer load SFC and I have to start the entire process. Also, none of my cd drives work. Please help me
  Also, I'm now a message that says minimum virtual memory is very low.
  I would be very grateful for any help or advice anyone can offer us on these issues. a million thanks in advance.
  bfchild

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what exactly happens when you try to run the scan disk or system restore? You receive an error message? If yes then after return the exact error message.

  No software XP, Microsoft no longer offers that you will need to make arrangements for windows XP windows installation CD. You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  See also the following articles that may be useful.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• How can I upgrade my insttaled windows xp professional 2002 service pack 3 for windows 7

  How can I upgrade my Insttaled Windows Xp 2002 service pack 3 for Windows 7 Proffessional

  Hello

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• I need help to solve a problem I'm having with an installatiion of set-up/repair Windows XP Home Edition service pack 3

  I have 2 computers running Windows Xp Home Edition Version 2002 Service Pack 3.  I tried to run a set-up/repair on one of them.  He loaded the files and went back to the stage of the installation.  He said at this point, it takes the file 'ASMS' of the S3CD.
  I copied the ASMS from the other computer files on my USB but the computer being the establishment does not recognize them.  The program disks that I bought with the computers at the same time say XP Home Editiion 2002 version, but nothing about service pack 3.

  What I need to know is if sp3 is the same for the home edition as it is for regular XP and is different ASMS files in the installation of the sp3 that they are in the House editiion.  If I buy the sp3 disc or download these files I will be able to complete the installation of the set-up/repair on my computer or is there perhaps something wrong with the device causing it to do what he did.

  I am also curios - running installation of set-up/repair on this subject, I lost all my files or will they preserved when I've completed the process?  If I lost my files I before moving on to Windows 7 or any other OS that supports available further in the future?

  Any help/information will be greatly appreciated.  Thank you.

  Hi RandyMeier,
   
  Service Pack 3 files will be different than the normal installation files.
   
  It would be useful to an original CD of Service Pack 3 for installation.
   
  There is an article that you can follow before that and check if it helps.
   
  "The file 'Asms' on the CD-ROM Windows XP Professional is needed" error message when you install Windows XP
   
  If you are using a clean installation process all files may be lost.
   
  In this scenario, you should consider the upgrade of the operating system Windows 7.
  http://microsoftstore.com/Win7
   

  Kind regards

  Divya R - Microsoft technical support.

• I have a new hp webcam hd-3110 download stopped and read I need a service pack3CD how can I find I have windows xp home edition

  I bought a webcam hp 3110 download stopped and read I need a service pack 3 CD drop a bunch of wied numbers appeared was supposed to type in? or how do I get it

  Community thanks for time. I don't know what or how, but the wizard has taken over and I restarted my computer an everthing works now I hope rthanks new norm

• How can I get a CD of Microsoft Windows XP Home Edition Service Pack3

  Caused by a virus, some of the files on my computer were damaged.  I was asked to get the Microsoft Windows XP Home Edition Service Pack 3 CD, so that he can fix my computer to my computer technician.  I'm having a lot of trouble to find this CD.  Anyone know how I can get an or borrow one?

  Hello

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  See information on the replacement on this link.
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  I hope this helps.

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• I can't open my pictures folder. Error message says I don't have permission! I ran disk utility and found no errors. How this could have happened and how can I fix this problem? I'm the only user.

  Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.

  How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?

  Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.

  (141083)

• Internet Explorer and other applications open as microsoft works. How can I get this problem?

  Original title: all the applications on my computer appear as microsoft works. How can I get this problem? Even internet explore a works file is not displayed and does not open.

  All my desktop icons are listed under the ribs owrks and work does not support these applications. How to get back my computer to the way it was?

  Hello

  1. which is the version of Windows installed on your computer? For example, Windows 7, Vista

  2. have you done any software or hardware changes on your computer before this problem?

  I suggest you to see the steps in the following link.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope the information is useful.

• Is my default font: Arial 12 PT, but my email in Outlook Express turns in Times New Roman. How can I fix this problem?

  My operating system is Windows XP 2003. I use Outlook Express to the mail, with the default font of Arial 12 pt. In the last weeks (unknown reason) all the messages that I sent appear in the font Times New Roman and I am unable to change Arial. How can I fix this problem?

  If this did not help...
   
  OLEXP: Cannot modify text using Outlook Express:
  Microsoft Knowledge Base. Q178895

   

  Then, the next step would be a new identity.

   

   

• Error 1722. How can I fix this problem so I can uninstall it?

  I have Windows XP with Service Pack 3 (computer updates automatically).  I need to uninstall a program and it will not ininstall.  I get error 1722.  How can I fix this problem so I can uninstall the program.

  Hello

  • Are what program you referring?
  • The question is with particular program or all?
  • There the latest changes on the computer before the show?

  Error 1722 is a general error associated with Windows Installer. I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• Formatting the USB in Windows XP disk, create a folder "system volume information" How can I overcome this problem

  Hello team, I tried to format my 2 GB to Format NTFS USB in WINDOWS XP. When I format the drive, it has been formatted sucssfully, but in the formatted disk, a folder is created named as 'System Volume Information '. I tried to remove my USB drive safley but it show and error as "the generic Volume is used in another program... '. ».  Why this happens, the 'System Volume Information' folder is a virus? How can I fix this problem... reply me as soon as possible... Thank you all...

  Hello

  It does seem like a virus. Since you're a NTFS format, it should be a system folder. System folder is present on NTFS volumes and is used for system restore points.

  If you want to remove, you may need to format the drive to FAT32.

  See also:

  Access to the System Volume Information folder
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;309531

• Asian languages appear as boxes; How can I fix this problem or if you use an online translator

  Asian languages appear as boxes; How can I fix this problem?  or if you use an online translator

  You will need to download a language pack to correctly display the text.