ATTENTION to THE IOS9.2 update!

Last updated IOS 9.2 caused unbearable noise on guitar and Mike entered into GarageBand (and in fact all the amp sim programs). I use an Apogee One but I heard other interfaces with problems.

Something has changed in this update that requires a correction.  Three weeks now, no solution. Apple very quiet on the subject

aapogee hopeless customer service

positive grid out an update that solves nothing

iinvested in Apple and apogee (one brand apple) as something that is supposed to work well, how wrong I was...

Hi Balmerg

I am interested in your comments: "last IOS 9.2 update caused unbearable noise on the guitar and the mic in GarageBand. I love Garageband (for iPad) and are now working with her for about two months with some success.

I use the iTrack Solo for voice and guitar Focusrite and a Midi for keyboards iRig. Recently, I have an electronic distortion: a kind of wink/crack/pop looks like a loose wire connection or his striped vinyl on my recordings. By a process of elimination, I discovered that it is on the voice (and now also on guitar). I have tried everything to adjust volume and output settings, but it still happens. So I thought it was the

ITrack Solo Focusrite interface unit of. I stopped and pulled out all the wires. Everything seems set for a while, but slowly the problem came back and got worse and worse.

I have scratched around on the Focusrite website. It seems that they make a quality product and guarantee their products and claim that most of the cases are errors rather than their equipment user.

Have you had much response to your message?

Tags: iOS Apps

Similar Questions

  • How to use the utility to update (uefi) BIOS HP

    Notebook: G62 a10em

    I downloaded the BIOS update tool from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 4226...

    and it is installed on my USB key.

    Now, how can I update my bios?

    The USB key contains now:

    BIOS

    | - Current (empty folder)

    | - New (empty folder)

    | - Previous (empty folder)

    BIOSUpdate

    -CryptRSA.efi

    -CryptRSA32.efi

    -HpBiosUpdate.efi

    -HpBiosUpdate.s09

    -HpBiosUpdate.sig

    -HpBiosUpdate32.efi

    -HpBiosUpdate32.s09

    -HpBiosUpdate32.sig

    my current version of bios is f. 08

    I did a cut above.

    After looking at the appropriate file you downloaded, it says this:

    "Prerequisites .
    -Microsoft .NET 2.0 is required. UEFI and Custom Imaging - the HP BIOS update must be run from a FAT or FAT32, partition with a volume of the "HP_TOOLS" name This Installer gives you the option to install on the hard disk (HDD) or USB. If you install on the HARD disk and the HP_TOOLS partition is not present, Setup prompts to create the HP_TOOLS partition. If you install on a USB key, Setup renames the partition on the USB in HP_TOOLS. If you use a custom image, you can create the HP_TOOLS partition manually with the type FAT32 and that the volume HP_TOOLS name. ATTENTION:-the UEFI system partition is not protected and can be removed. -Backup of the computer by using the complete PC Backup feature of Microsoft Windows Vista does not save the UEFI system partition. For these reasons, HP recommends that you place no additional data on the UEFI system partition. Because the partition is not backed up, corruption or failure of the partition will result in the loss of all data on the partition, as well as the loss of UEFI functionality. "For more information, visit: www.hp.com/go/techcenter/startup"

    There is little documentation on how to use it, but a Member here figured it out.

    http://h30434.www3.HP.com/T5/operating-systems-and-software/envy-14-system-recovery-doesn-t-work-with-latest-BIOS/m-p/328684/highlight/false#M45165

    using Windows 7:
    Just plug in the USB key and then run the SPnnnnn.exe BIOS file downloaded from the Web site drivers HP.
    Assuming that the USB is configured correctly (see below), Setup the BIOS sees the HP_TOOLS partition on the USB, copy of the BIOS and its file signature on the USB key, then run Setup winflash. The system BIOS detects the USB and the partition HP_TOOLS and the BIOS is magically updated.
    I put in place a new USB key as follows:
    1 rename the partition HP_TOOLS from the hard drive to something different like HP_TOOLSbak
    2. Plug the USB
    3. Download and run the utility to update the BIOS (not the BIOS, still) drivers HP support page.
    4. Select the option to install to a USB
    5. Select the option to create the partition HP_TOOLS
    6. The reader should now be formatted as HP_TOOLS with a record of Hewlett-Packard containing BIOS and BIOSUpdate records. The BIOS folder contains empty current, news and previous records.
    7 download and run the HP System Diagnostics (UEFI) MS drivers HP support page
    8. Select the option to install on a USB key. This will create a SystemDiags folder under the Hewlett-Packard folder
    9. Download and run the HP Notebook System BIOS update for the HP support page drivers, given that the USB is correctly tagged it will install the update of the bios on the USB drive
    10, we have to end up with a HP_TOOLS partition on the USB drive identical to the one that you removed from the hard drive.
    Once you have configured the USB drive, you can upgrade to other versions of BIOS (most recent or oldest) using this drive, as I mentioned above: just plug in the USB and then download and run the BIOS Setup program.

    Having said that I'm not sure of what you do, once you boot the USB drive.

    .

  • A later version of the Apple software update is already installed on this computer.

    Recently, I had a new iPhone 5, so I had saved my old iPhone 4 with iTunes so I could transfer all my information. But when I connected my iPhone 5 it came with this message: "the"Rachel's IPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.come to download the latest version of iTunes. " The iPhone 5 is iOS9.2

    So, I went on the website to download iTunes, since this was the 12.1.2 version and should be downloaded 12.3.2, went to do the implementation, then it came with the message: "a later version of the Apple software update is already installed on this computer." So, I tried to uninstall it (after each step on the Apple Support to do) but when I went back to uninstall all apple programs, I could not find "Apple Software Update", it wasn't in my programs...

    I did all the steps anyway, and the same message of "a later version of the Apple software update is already installed on this computer." came after I tried to reinstall iTunes.

    So, I guess my overall question is, what should I do? How can I fix?
    Please answer quickly.

    Try to repair the Apple Software Update of the programs and features Panel, remove it and then reinstall iTunes.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Some updates could not be installed: failure on the following security updates - KB974811 KB974556

    Please help me solve this problem.  I have automatic updates set to say "updates are ready for your computer.  Click here to see these updates'; Here is the little yellow icon in the system tray low to the right of my screen.  What happens when I click on this icon is usually I then click 'express install' (and non-personalized) and then press "install".

    My computer sometimes slows down a bit that it downloads / installs these updates and which can be quite a pain in the thigh because it effects everything that I'm working at the moment, and of course because you have to restart the computer.  I have external hard drives 4 or 5 so I to sequentially turn them off one at a time by ejecting them, turn off the computer and then start it back up and restart the hard drives.

    In any case - I can never remember to "SOME UPDATES COULD NOT BE INSTALLED the SCREEN" so I'm at a loss to know what to do.  My computer is perpetually slow because the small yellow Update icon sits in the systray continually trying to draw attention to me and when I do the same thing continues to be time and again - failure!   I tried closing down my antivirus and windows firewall, but nothing helped.

    your help would be much appreciated, either tell me how these updates to get the update of my systray icon, or to get updates of pit.

    According to belarc Advisor - I am running:

    Windows XP Media Center Edition Service Pack 2 (build 2600)
    3.00 gigahertz Intel Pentium 4
    cache of 16 kilobytes main memory
    secondary memory 2048 k-cached

    9 of Avira antivirus
    SUPERAntiSpyware (although it is installation not not at the auto of the msconfig, so its off to the update)

    Thank you!!

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Installed the latest important updates this morning; upon restart, the computer didn't work as expected. now behaves as if the motherboard is dead.

    This morning at appx. 1:30 AM PST, I installed the latest important updates from the Windows Update Manager on my HP Pavilion dv6000 laptop. I did manually, by a double click on the little icon in the toolbar and clicking on the button install. Once the update had completed, I clicked on the "restart later" button and close my computer using the Shut Down command - the usual symbol "click here to close and complete the installation" didn't appear. I thought it was a little weird, but chalked it up to the fact that I had taken the lead and made the installation.

    About an hour and a half later, after being able to get to sleep, I decided that I would try to do a job. I pressed the power button and my computer started well upward, giving me the ' now install, update (1/3) [percentage] completed. Do not turn off your computer. "message. Which is quite normal, let him do his thing without turning it off.

    The update is completed and I am greeted by my office. Displays the logon to Gmail Notifier window, and that's when my problems began: I tried to move the arrow to disappear, and the arrow has not moved. The circle of "transformation" had, next to the arrow, so I thought it must be a minor hiccup. I've waited, waited and waited... But even after all of my normal startup programs loaded, my mouse has failed.

    Pressing the Windows key to open the menu start does not work, either; It was as if everything had been disconnected. After waiting a few minutes, I decide that maybe I just need to restart and, given that my keyboard was not working, I pressed and held the power button until the system off (I know, I know, it's a horrible thing to do).

    I waited a minute, and then you press the power button. The lights came on, the fan spun, but the screen remains black as if I did nothing. I waited, because my computer arrived in the past tried to give me an attack of apoplexy by hanging several screens, but... nothing. The fan spun, the light shone their beautiful blue, but that's all.

    The only thing I have changed or done differently was the updates, I have not dropped my computer; I've not spilled something on or in I have a Targus chill mat that I use religiously. I download attachments from people I don't know no/trust (I can't, my antivirus program deletes attachments in emails from spam); I use Firefox with NoScript and anti-ad; My AV/Antispyware/malware program is always up to date and six types of awesome and more.

    My system is Windows Vista Home Premium on an HP Pavilion dv6000. I have an AMD Turion 64 x 2 processor and a Nvidia mobile graphics card (I don't remember exactly who he is; I can't the specs). I don't have a DVD of restoration, for reasons that did not need explores right now. I had my phone on... Two years, I think. I'll have to double check.

    I can't start in safe mode, because I get nothing - no POST, no beeps, without bumps. The CD/DVD drive makes some noises, as he is looking for a drive (there isn't one in the drive), and that's it.

    I think I have to take someone and make them open and see what's the problem, but I appreciate any thoughts/ideas/opinions/assistance that anyone can give. Thank you for your time and attention.

    Alas, no, the screen seems to be fine. He had not been acting funny before that, in any case. I checked out, and the external monitor just went to sleep because there is no signal.

    Thanks for taking a peek anyway. I guess it's a workshop for me and my laptop.

    Birdy

  • Why are there updates as long as there is no place for the programs they update?

    I have a Sony notebook with windows XP operating system. Whenever I turn it on, I have more updates. It got to the point that there is no more space left on the drive C for programs that are updated. Why are updates written so sloppily? Would not take more attention to the space used by these updates? My first computer was a 10 meg hard drive and it works perfectly, now 14 gigs is not enough. Must we have 500 gigs to run windows? Does this reader size filling too in time? Is there a way to provide more space on my hard drive without replace or remove the original programs IE. Windows? Cant I consolidate updates into a lighter version to date of a program without updates? I wonder if a total format would help even at this stage.   HERE COMES UPDATES!

    If you run out of space on the hard drive of your computer, you do not have a large enough hard to meet your needs drive and/or you have not successful space.

    You have posted in forum Windows XP and Windows XP with all updates since the beginning and a Suite of office of your choice and a picture/photo editing application of your choice and alternative browsers of your choice and several Internet Plugins for each of these browsers installed with an assortment of other applications should take between 4.5 GB and 10 GB of disk space.  Which leaves you, with your stuff, the rest of the car in question.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
    (These instructions will be different depending on the version of IE that run you.)

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.

    At the end of the day - a standard installation of Windows XP with all sorts of options is likely not above about 4.5 GB to 10 GB in size. If you have more space than that (probably do on a modern machine) and most seem to be used - probably you must copy * tips * off or find a better way to manage it.

  • Downloaded the wrong BIOS update

    Hello, I'm val. It's my pc, http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5071... I downloaded updated bios wrong, H-RS880-ΜATX Motherboard BIOS update which I discovered that my mother board need to update BIOS of motherboard of N-Alvorix-RS880 and I am on this computer now it works very well the only difference I noticed is after I started my computer and log I get a black screen for a while until Windows explore lights, which takes more time to do this, I usually start to the top of the Explorer windowse myself. whenever I'm trying to download the N-Alvorix-RS880 motherboard BIOS update it gives me the bios image 252 error code is invalid or damaged. I have no idea of what having the wrong bios update will do to my computer but I keep my computer on at all hours of the day. I've been looking online and I see computer most people becomes useless and I wonder why mine is not useless, but in any case I hoping to get help, please save me to things I am aware of a .

    Hello Valentink,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you believe that you have installed an incorrect BIOS update on HP Pavilion Elite HPE-510y desktop PC. I checked and the two BIOS updates you link to are for your computer, the only difference is the version the update of the BIOS of motherboard ΜATX-RS880-H is Version 6.11 Rev has what is more recent, then the N-Alvorix-RS880 card motherboard BIOS update which is Version 6.07 Rev A. You cannot install the second update is because the you have a more recent version.

    I wouldn't worry have the incorrect BIOS up-to-date is one you have for the computer. As you can see on the page the two updates BIOS Drivers of HP Pavilion Elite HPE-510y desktop PC are listed for your computer.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

  • How can I change attention to the red text?

    I am writing a DITA document. I'm changing the color of the text 'attention' score choice item of the black, which is the default, to red. I tried to change things in the commonelements.mod, but without success. I know that you can do. I'm not a programmer, and it would be useful to have explained it in a progressive way.

    Thank you

    Robert

    Robert,

    1. If you want to be editing EDDs, you should be familiar with the developer structured application Guide and corresponding reference manual. To find the latest versions, go to adobe.com, search for FrameMaker, click on help and Support, and then follow the appropriate links in the list of documents online on the right.

    2. find the definition element for in commonElements. In text format rules, add the rule to the context:

    If the context is: [type = 'attention']

    Properties of default fonts:

    Color: Red

    3. as delivered, in the DITA JED text overlays are updated manually, not automatically. Unless you have changed the settings, you will need to open each ESD you use and update its text inserts. I don't remember if, if there are nested text inserts, you must update each level separately.

    4. once the JED are updated, you will need import the EDDs element definitions in related models or all existing FrameMaker documents.

    -Lynne

  • iTunes does not appear the option to check the iOS Software Update

    I have a 6 more than 64 GB iPhone with iOS installed 9.3.5, laptop HP Windows 7 (SP1). The latest iOS updates bit (of IOS 8 or 9, I did "over the air" rather than connecting to iTunes on my laptop.)

    This time, with 10 being released iOS and reading online on a certain number of iPhones in 'brick' update 'over the air', I decided to update by connecting via a USB/lightning cable to my laptop and iTunes.

    When you open iTunes on the laptop by clicking on the device (iPhone) and the 'summary', she properly showed the current software on my phone (iOS 9.3.5), but no option for "check for updates". He also says "Connect this iPhone with a USB cable in order to update or restore it is a software", which seems strange, because it is connected via USB and is recognizing the version of iPhone software up-to-date and correct. After not being able to understand why, I have found also that iTunes 'control upgrade' says that v12.1.1 has been current. After some research online, I came across a Web site that shows iTunes was up v12.4.3 at the time of writing. Therefore, I went on Apple's site to update iTunes, as I couldn't do to in iTunes itself. I found that the latest version is 12.5.1.21 I downloaded and installed (without uninstalling the previous version first). Still the same problem. Then, I uninstalled this version latest and updated to iTunes on my laptop and reinstalled. Still the same problem.

    I was able to 'Sync' and the phone to iTunes with no problem at backup.

    Can anyone help please?

    Post edited by: colboy58

    I considered just take a chance and update the iphone software app 'Settings' of the phone with the ability to do a "restore" via iTunes on the laptop if I ran into problems. Then, however, I found that the button "backup restore" in iTunes was "greyed out" and not "clickable".

    Hi colboy58,

    Thank you for using communities Support from Apple!

    If I understand your message that iTunes appears that a software update is available for your iPhone 6 Plus. Since iTunes showed previously that it was also updated, there is probably a problem with the security on your PC iTunes software to communicate with our servers.  Please follow the troubleshooting steps in the link below to get started:

    Solve the problems between iTunes and third-party security software

    Take care.

  • My update is my phone keep cycling through the settings of update iCloud

    My update is my phone keep cycling through the settings of update iCloud

    What should I do

    Try disabling the Contacts under settings > iCloud. When you are asked if you want to keep them on your phone, select "keep". Tomorrow or Saturday, rallumer turn it back on again, select "Merge" and see if the problem is resolved.

    See you soon,.

    GB

  • How to take screenshots with the new IOS update

    How to make a screenshots after the new IOS update

    Screenshots are taken in the same format as always: just press the power button and the home button at the same time. If for some reason, this does not work on your device, restart it and try again.

  • How long does normally take to access the screen with update or restore?

    How long normally takes to get to the restore or update the window when the need to enter an Ipad handicapped?

    If you say that you see that you can not try your access code new for X number of minutes on your iPad, you will never see the restoration on the device window. You have to connect to iTunes to restore it, or use iCloud to erase it.

  • How to cancel the El Capitan update reboot

    Hello. I have os Maverick in my MacBook Pro mid 2012, I'm not wan't to upgrade yet because the problems of compatibility of specific software.

    By mistake, I hit the update button that appears in the corner of the screen from time to time. When I look at the App Store apears Reboot. This means that if I reboot, it will install El Capitan? How to fix this situation? I certainly don't want to do it again.

    Can someone help me with this?

    Thank you

     > System Preferences > users and groups

    Access your account

    unlock the account is locked

    Click the startup items

    remove any question pertaining to the OS X update highlighting by clicking on the "-" icon. (if they are present)

    Reach

    Macintosh HD/Library/StartupItems

    remove any item related to the update of OS X and move it to the trash (if present)

    You may be asked your credentials

    Finally, and especially in your applications folder, you can move or compress (zip) the file "install OS X El Capitan", or you can delete entirely to download again at a later date, provided that he is authorized to your account in case another OS X becomes the public version.

    the file is located in

    Macintosh HD/Applications/install OS X El Capitan

    Once removed from its original location, this file can be put into another folder or disk to guard or later to install.

    Once you have checked the above steps reboot normally

  • 4K @ 60 Hz fichier_ecriture deleted on the bootcamp driver update?

    Hello, I currently have a 2015 Macbook pro with a M370x AMD 10 under bootcamp with the graphics driver 6.0 Windows Update installled.

    I am running a LG 27UD68-P on the mini display port with an adapter Club3D HDMI 2.0.

    This will run out 4K @ 60 Hz very well on Mac OS X and same bootcamp without updating to 6.0 graphics driver was last updated.

    Now that I've updated, my refresh rate is only limited to 30 hz, even if AMD Radeon is the maximum resolution supported and the refresh rate is 60 Hz 4K.

    I've updated the graphics card drivers previously using the method of unofficial workaround for the AMD driver version, but I re-installed Windows since then and you just want to know if it is possible with the latest updated version? If this is not the case, what would be the next driver update be scheduled for possibly?

    Thank you.

    No one on the CSA can provide you with a date.

  • What is the mozilla firefox update Shockwave Flash plugin AND what is the latest version of Adobe Flash Player?

    After update of mozilla firefox and come here to help another user pointed out that I had several Flash plugins below. Before updating, I was updating from mozilla firefox and Adobe. Of course, things were NOT up-to-date. I managed to delete the obsolete Flash and Adobe Flash Player plugins. I just want to know what that "more" updated the plugin and the player are while I know that I have the last and am new. I do the last firefox update now and I use Windows 7. Thank you! You people here are the best!

    Note that your system details list shows several Flash plugins.

       Shockwave Flash 14.0 r0
       Shockwave Flash 17.0 r0
    

    The plugin for Firefox is called Shockwave Flash and the latest version is 17.0.0.188

    When it installs, Flash by default to update automatically, but if you need to manually update, you can use one of these pages:

Maybe you are looking for