Attribute RADIUS 198

Similar Questions

• Secure ACS: Special-attributes RADIUS for Enterasys E7

  Hello

  We were in a pretty old version of the Cisco Secure ACS for AAA our network devices.

  Unfortunately, the server crashed a needed to install and configure it with a new server.

  GANYMEDE + for our devices using Cisco works very well.

  We have a couple of switches made by a seller called Nexans, which support only the RADIUS - it works fine also.

  In addition, we have still a few E7 Enterasys and with those RADIUS does not at all.

  Sniffering packages, everything looks good.

  With the old server has worked well.

  Does anyone know if there are special configurations (attributes, for example) when you configure a GBA for the RADIUS Enterasys customers?

  Thank you

  Rolf

  Try this

  ID attribute [011] filter to ' Enterasys:version = 1:mgmt = su:

• Cisco ACS 5.3 - attributes Radius, and "Administration/Shell device profiles.

  Can someone help me with that?

  Under ' profiles policy elements/authorization and permission to access/permissions/network "I defined a profile and the following attribute:
  Attribute = F5-LTM-user-role
  Type = unsigned integer 32
  Value = 300.

  My question is:
  How can I set the same as above using "Administration/Shell device profiles?

  There is a custom attributes tab, but I can't understand how to specify the field 'Type '. (On the custom attributes tab is there room for 2 fields and not 3 fields).

  Hello

  Just for my understanding you try using radius or Ganymede?

  Profiles of the shell are used for Ganymede and authorization profiles are used for RADIUS.

  Thank you

  Tarik

• Can ACS adds more Juniper RADIUS attributes?

  Hello

  These attributes RADIUS Juniper taken in charge by Cisco default ACS4.0

  Juniper-Local-user name

  Juniper-allow-orders

  Juniper-deny-orders

  Is it possible to add more 2 attributes

  Juniper-help-Configuration

  Juniper-deny-Configuration

  Kind regards

  Audrey

  Hi Audrey,.

  4.0 the only way to add these attributes is to contact TAC and get the script directly from the developers.

  This problem has been resolved in ACS 4.1.23

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCsi18979&submit=search

  If that answers your question, then please mark this thread as solved, so that others can benefit from.

  Kind regards

  Jagdeep

• ACS 5.2 - Support for RADIUS attributes per user

  Hi all

  Does anyone know if it is possible to configure the RADIUS attributes on a per user in GBA 5.2 basis?

  That was possible under ACS 4.x, however, that I can't seem to find reference if ACS5.2 supports.

  Thank you

  Leon

  You can do this by setting by using attributes and then by substution attribute.

  You can see an example of it to set an internal user attribute to use as the value for the field address-IP-box

  This is just an example and can be applied also to any attribute RADIUS in which set an attribute of the user of the same type. Values can also be taken from an external identity as AD store

• Interaction of Ganymede + and radius ACS 2.6 download PIX ACLs

  We have ACS v2.6 running and control our connection to remote, routers and switches access. We are now looking to add support for a PIX firewall internal and want to use downloadable ACS ACL for the PIX. (to control outbound traffic through the PIX for authenticated users)

  We have achieved this help attributes RADIUS of Cisco IOS/PIX

  [009\001] cisco-av-pair on ACS. (and ACL restrictions of access on access to users)

  However the problem we noticed is that any user is valid in our database of CiscoSecure or SecureID can authenticate and gain access to through the firewall, even if they are not allowed to do this (and as it is by default on PIX from inside to outside is allowed unlimited full access).

  Was then imposed restrictions on network access on the CiscoSecure ACS for our PIX - to allow only access of corresponding user groups, but it did not work with RADIUS only GANYMEDE + (I guess that's because the RADIUS does not support approval).

  We must work with GANYMEDE + and the passes of the ACS to the bottom of the ACL number/ID for the PIX for users allowed.

  Question: We want to use downloadable s ACL of ACS for the PIX (for reasons of central support) is possible using GANYMEDE + and if yes how we re CiscoSecure ACS suitable for the ACL example below;

  pix_int list access permit tcp any host 10.x.x.x eq 1022

  pix_int list access permit tcp any host 10.x.x.x eq 1023

  Thank you

  Download ACL works only with the RADIUS, as described here:

  http://www.Cisco.com/warp/public/110/atp52.html#new_per_user

  You can continue to set the ACL on the PIX itself and simply pass the ACL via GANYMEDE number (as shown here: http://www.cisco.com/warp/public/110/atp52.html#access_list), but you can actually spend the entire ACL down via GANYMEDE, sorry.

• First 2.2 and ACS5.6 - Radius - Login authentication issues

  Hello

  Anyone no matter which setting of first chance to use Radius Authentication for users in the administration against ACS5.6?

  Right now the ACS is back a successful authentication ' 11002 returned RADIUS Access-Accept"on a first attempt to connect although first returns the username/password incorrect name / access denied.

  Two schools of though that based on previous posts / online search;

  1. in the Access Service > tab allowed protocols > radio buttons "send as in the acceptance of access RADIUS user name."

  Currently defined as the "main username", which as I understand it provides the name of the certificate, 'query access RADIUS User-Name' would make more sense?

  2. requirement to attribute RADIUS

  Post, but this is GANYMEDE + attributes - export to-do lists

  https://supportforums.Cisco.com/discussion/12394496/Cisco-Prime-RADIUS-u...

  A similar task needed to be completed to the RADIUS?

  Thank you

  You will need to send attributes for radius authentication work. For example, the permissions of the super user for the virtual domain to the root, to the following:

  Cisco-av-pair is NCS:role0 is Super users

  Cisco-av-pair = NCS: virtual-domain0 = ROOT-DOMAIN

  In the user group list, you will see next to each group, you will see links of list of tasks. Usually you just put in the role and the virtual domain.

• RADIUS authorization does not not for Nortel by ACS 5.3 switches

  Hello

  RADIUS authorization does not work on the Nortel switches, I configured the access policies relevant for the attributes RADIUS (attached screenshot)

  Order get not executed due to the failure of authorization:

  config cli password rwa

  I do not see RADIUS authorization reports option, just to check if someone has understood how to set up these reports?

  I made a capture of packages for packages of AAA of the nortel switch and found that the accounting request contains the cli command sent for authorization. (pcap file attached)

  Kind regards

  Akhtar

  Akhtar,

  This isn't how the authorization of RADIUS. Accept access and the av-pairs that are sent in the response is the permission for the session of the user. This isn't like Ganymede where each command is permitted with an authentication request separate with the command that the client is running.

  When it comes to radius account management isn't too late in the process.

  Thank you

  Tarik admani

• WLC with ACS 5.1 (RADIUS) for management * AND * Network users

  Hello

  I have authentication RADIUS of installation for the users of the network AND management on my NM - WLC (5.2 ongoing execution) against ACS 5.1

  My Question is:-

  For users to log in to Admin, I need to come back "Service-Type = Administrative - User" in order to make it work.

  Because the ACS sees all applications from the same device (WLC) for Admin and network users,

  the way I am currently treats it is by creating a filter based on the user name

  Thus, users that contain 'admin' in their ID, use a set of

  Network access policy authorization, who has an authorization associated with the attributes RADIUS profile.

  Normal users have a ' network access policy authorization different rule ", with a different profile.

  While this DOES WORK fine, still me I was wondering if there is a better way to do it, rather than create a rule

  based on the user name.

  I could use GANYMEDE + for the management, but I don't think that ACS allows the same client AAA (WLC) to use both protocols.

  Thank you

  I think it's something very common for things to do

  You may notice that ACS 5 comes preinstalled with a selection policy of service that differentiates them the Protocol-based queries and orders or service 'Access to the network by default' or "Default Device Admin" out of the box

  If you want only to RAY can either disable or delete the rule for applications of GANYMEDE + or not choose GANYMEDE + in the definitions of the unit

• ACS NAC 5.2 comments Sponor Radius Authentication

  For some reason, I can't get the Hall "sponsors" for authentication on the server of comments of the NAC (2.0.2) using ACS 5.2 via Radius.

  I managed to find a way to get feedback from the NAC authentication Radius for 'Administrator' to work by adding the value of custom RADIUS IEFT-6 under...

  • Elements of strategy
  • Authorization & permissions
  • Access to the network
  • Authorization profiles

  I added a strategy & tab attributes Radius... I manually entered an attribute that looks like the following:

  • Dictionary type: = IETF RADIUS
  • The RADIUS attribute: = Type of Service
  • Type of attribute: = enumeration
  • Attribute value: = static
  • Value = "administrative".

  Then I created an access policy... I looked for an ad group specific - result = 'Name of custom political upstairs'...

  All this works fine... the Docs of the NAC comments you say the Radius server must return a value of IETF-6...

  When he enters in the sponsor section, it does not tell you the value of your server Radius must return... so just to smile, instead of 'Name custom top political', I tried "Allow access"... I tried the 'name of the custom policy above "...  Don't know what else to try to get this working... Anyone have any ideas?

  This is a similar to the document I'm following:

  http://www.Cisco.com/en/us/docs/security/NAC/guestserver/configuration_guide/20/nacguestsrvr.PDF

  Page 68 refers to the "Sponsor configuration authentication" Ray... it just tell you to change the order of authentication & add the Radius server...

  Use NAS prompt (7) instead of administrative (6) for users of sponsor.

  -Jesse

• IKEv2 AnyConnect and pool allocation via RADIUS

  I set up a CSR1000V (03.09.00a. S.153 - 2.) for AnyConnect with IKEv2. I store the user name and the IKEv2 permission policy on the RADIUS server. The customers are placed in their own iVRFs through the broadcast on the NAS RADIUS attributes.

  for example, in FreeRadius (2.1.12), what follows is defined (home is the 'group') as [email protected] / * / format.

  Home-password in clear text: = "cisco".

  Cisco-AVPair += "ip:interface - config = vrf forwarding CUST-A."

  Cisco-AVPair += "ip:interface - config = ip unnumbered loopback100."

  Box-pool = "CUST-A-POOL '.

  [email protected] / * /               Password in clear text: = 'test123 '.

  The user and group permission information are then merged and cloned on the virtual model:

  Crypto ikev2 name-mangler EXCERPT-GROUP

  EAP suffix delimiter @.

  !

  Ikev2 crypto FlexVPN-IKEv2-profile-1 profile

  fvrf IPSEC-FVRF game

  match the key - remote identity FlexAnyConnect id

  identity local dn

  authentication eap remote query-identity

  authentication local rsa - sig

  PKI trustpoint cacert.org

  DPD 60 2 on request

  AAA authentication eap List1-AuthC-FlexVPN

  AAA authorization eap group list mangler-name-FlexVPN-AuthZ-list-1 EXCERPT-GROUP

  AAA authorization eap user set caching

  virtual-model 1

  !

  type of interface virtual-Template1 tunnel

  no ip address

  ipv4 ipsec tunnel mode

  VRF tunnel IPSEC-FVRF

  Profile of tunnel FlexVPN-IPsec-profile-1 ipsec protection

  However, it appears that the attribute RADIUS specifying that the pool is ignored; I can see the attribute RADIUS (IETF 88) broadcast on the NAS in the RADIUS debugs:

  * 21:36:39.384 August 16 TSB: RADIUS: box-IP-pool [88] 13 'CUST-A-POOL'

  However, cryptography debugs say an IP cannot be attributed:

  * 21:36:39.435 August 16 TSB: IKEv2: cannot allocate an IP addr

  Contents of payload:

  AUTH NOTIFY (INTERNAL_ADDRESS_FAILURE)

  If the framed pool is removed and a box-IP-Address instead of the user, the address set is assigned. The CUST-A-POOL is set locally on the NAS server. Is that all that I'm missing? Any debugs more detailed can be generated?

  See you soon,.

  Matt

  Matt,

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty98153

  Send:

  ipsec:addr-pool or ipsec:ipv6-addr-pool

  M.

• Static IP for AnyConnect user LDAP/RADIUS

  Hello.

  We have the situation, we have built a RAS AnyConnect solution for many users on LDAP or RADIUS - we can choose what we like.

  We now have the problem that some users (round about 1,000) the same must address static ip on a swimming pool all the time, so they can get through the firewall behind the RAS connection.

  I do not have fould a possibility to add a static IP address via DAP values or attributes RADIUS and LDAP.

  A solution, anyone knows how we can assign a static ip address to our RAS users? No experience?

  Hi Marco,.

  on the Radius Server, configure the box-IP-address (attribute IETF 8) for each user, with the ip address as the value.

  HTH

  Herbert

• Issue of IAS with the Conc 3005 configuration

  I have install IAS on 2003 Server to authenticate users. I think I installed everything correctly except for the type of authentication used by the 3005 and I'm stuck. It seems that the 3005 uses PAP to authenticate with IAS. I get the following error when you use the function Test (of the RADIUS authentication server) and when you actually try to connect to the 3005 with the IPSEC client.

  Tim user refused access.

  .

  .

  .

  NAS-Port-Type = virtual

  NAS-Port = 1056

  Proxy-policy-Name = use Windows authentication for all users

  Authentication provider = Windows

  Authentication server =

  Policy-Name = authenticate all VPN connections

  Authentication type PAP =

  EAP-Type =

  Code motif = 66

  Us reson = user attempted an authentication method that is not enabled on the matching remote access policy.

  To test I go ahead and enable PAP authentication on the IAS remote access policy and the RRAS remote access policy. With this I can connect without problems and see an IAS attesting to the authentication event. If I disable the PAP on IAS or RRAS political I get the same error as above. So, it looks like the 3005 uses PAP to authenticate to the IAS server.

  For the life of me I can't figure out how to use MSCHAP2. When I look at the properties of the database group AND the Test group, the only place to configure the authentication type is PPTP/L2TP tab and is not for IPSEC. However, the only verified method that there is MSCHAP-2.

  I'm sure that everything is set up correctly, because if I use a wrong password or try to connect when switched is disabled in AD I get a legitimate protest telling me I used a wrong password or RA is disabled on the account. I know that IAS correctly makes an AD request.

  Can someone tell me what I am doing wrong? How can I get the 3005 use MSCHAP-2 when you query the IAS server?

  Don't worry about this too. Concentrator use probably 02 attribute RADIUS User-Password instead of Chap 03-word of past, but the password itself is not sent in the clear. It is chopped by RADIUS shared secret. If you need MS-CHAP exchange between the RADIUS server and the hub to try to set up authentication = RADIUS with expiry on the tab screen IPSec change group. I didn't test it, but sure enough this expiration feature requires MS-CHAP exchage unfold. Please, drop a message if you get a success.

  Kind regards

  Oleg Tipisov,

  REDCENTER

• Dynamic assignment of VLANS / SSID using the IAS 4402/MS

  Greetings,

  In short, we have a WLC4402 (50 AP license) and about 30 1252 s towers in place. At the moment we have three VLANS / SSID in place - one for admin, to teachers and students. The WLC uses a server for MS Windows 2003 running IAS for PEAP authentication. Windows XP, the SSID clients entered manually based on "prior designation" 'type' laptop (admin, teacher or student).

  It works very well. However more frequently our users were 'sharing' portable computers so a student can need to use his laptop computer and vice versa. In short, we would like to use the dynamic assignment of VLANS / SSID as well as if a student has the teacher, 'students' laptop VLAN / SSID would receive them when connect (and apply the appropriate ACL, QoS policies, etc.)

  We have found the documents on how to do that with a CBS, but is there something available for this configuration with a MS IAS server.

  All entry information would be greatly appreciated.

  Joe

  The installer works fine with the Server IAS Ms. You must set the options for RADIUS (3 of them) which are documented in the ACS similar article of the same ilk. You can have one SSID, using RADIUS authentication and have the Active Directory to determine the membership to a vlan based on the group.

  The RADIUS attribute parameters are

  Tunnel-Type = Vlan

  Tunnel-Pvt-Group-ID = vlanid

  Tunnel-Medium-Type = 802

  I also like to set

  Ignore-User-Dialin-Properties = True

  You must create some policies in IAS to match your windows groups and set the id vlan correct. A separate policy of IAS by vlan.

  Set the attributes RADIUS by political IAS and ad group or however you plan on the determination of the membership.

  If you want to use RADIUS for administration, you must also define a separate policy that defines the RADIUS of the Service Type administrative = attribute

  Jim

• end user ACS4.1 interface

  Hi all

  Currently, end-users are invited for authentication when they try to access the internet for the name of user and password.

  Is it possible to set the timer of inactivity at a specific time? By user or by the Group of ACS?

  Example: The user has been inactive on that web session to any site for say 5 minutes, the session has expired and that they must be authenticated through the ACS.

  In the IETF Radius attributes section, you define the attribute radius 28

  Idle - Timeout:attribute 28

  You will need to enter the time in seconds

  Kind regards

  ~ JG