Audio and video out of sync after rendering
I already asked a fairly identical question like this, but I have some news:
First of all, my problem is that after the export of the audio and video is not synchronized as in the scenario. Well, many have told me that he deals with variable frame rates, because I have images is 25 frames per second and sequences with 29.97 fps. But normally first would have changed directly each element in my sequence (25 fps, 1920x1080p) settings. And later when I add the clip in MediaInfo, he also tells me that the frame rate is 25 fps constant, not Variable. So I think that this is not yet the problem more.
But now, here's a little 'story': when I open the video after the return of his perfectly synchronized WITH the VLC Media Player (and not Windows Media Player).
And my question is: how is this possible? Couldn't, I now just change the Standart to VLC Player and then upload it to Youtube with the normal sync? What is the difference between windows media and VLC media player in this case player? Maybe it's because I have a few Quicktime footage in my sequence, which can be read with VLC Media player and not with windows media player?
If you have any ideas, let me know!
You basically answered your own question. VLC has proved to be more versatile and superior then the WMP.
Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem
No reason? HE WORKED IN CC 2014 PEARLS!
any help is very appreciated.
OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!
Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools
don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools
Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2
I've seen a lot of discussion threads on this site and others on the subject. I shot some videos on my iPhone 6s and wanted to compile it to Premiere CS6. When I watch the video on my phone, VLC or QuickTime Player, the audio and video line up perfectly. When I import it in preview the sync audio and video download very out of wack. I tried to convert the video in .mp4, .mpg, .mxf file formats, and nothing does the trick. I tried to use the hand brake to apply a constant rate, but not luck. Does anyone have a solution to this?
CS6 6.0.5 Adobe Premiere version
16 GB of RAM
a lot of free space on the hard drive
If you go to the movies on a cell phone from Apple, you may need to use an Apple program for editing... have you looked at Quicktime Pro?
So, I use Adobe Premiere pro cc 2015 to change a screen capture video recorded with quicktime player. I'm on a mac mini with OS X el capitan, and it was my first time using first (so I probably just doing something wrong because I do not know the program, but anyway, I imported the video into the first, (it's a .mov file format) and the video and audio are out of sync) so I thought ok, I can simply detach the audio, move it above, the re - attach it, right? so I found a part of the video that has been easy to match the audio and video, and I lined up. Everything was perfect until I went to other parts of the video and realized that they were always out of sync. Apparently, the video is at a different speed or format or something as the audio, and even if I have lined up on the one hand, the other parts are always out of step. I looked at how to fix, I messed with the project settings, then tried to change a .mov to a mp4 (because a mp4 file that I already have on the computer was functioning very well in first) and finally, as a last effort, I downloaded version 2014 so and NEITHER VERSION WORK they both the same number.
If someone can please help me I WILL BE so HAPPY and thanks a lot in advance
I am really sad because I'm upgrading to use iMovie (ugh) and I was so excited for the first time and now it is messed up, and I'm really disappointed.
If it makes a difference, the microphone that I use is a blue snowball ice I bought a week ago (WEEK AGO) haha
None of the parameters of creation, or QT player or something that might help is very much appreciated.
Thank you, Owen
Thank you very much!! I finally found out with the help of the family, but I thank very you much for help!
I capture images from video game using ShadowPlay recording at 60 fps mp4 files. When I import into first and play in the sequence, the audio and video are out of sync. When I play in VLC or Windows Media Player, the timing is perfect.
Why first plays the audio and video synchronized?
The corrections that I found online that does not solve the problem are:
-Make the video in the work area bar (it actually makes it worse for some reason any)
-Edit video in .mov file extension
-I know how to use Handbrake to make the files before import has also been suggested, but I don't want to have this extra step added to my workflow, it should not be necessary.
Any help on this would be greatly appreciated.
Tempest tim wrote:
Also, is there no other way to get around the problem of variable frame rate?
Not if you use the GPU hardware to capture your h.264 videos, there isn't. First can not correctly handle variable frame rate images. And the images only you're going to get your encoder is VFR.
You have 3 basic choices:
(1) stop using ShadowPlay and use something else which will tax your system more to capture video in a constant frame rate format. There are other applications that capture images CFR, generally in AVI format, and the resulting files are massive. You will have a drop in performance in the game when you use these applications.
(2) transcode w/parking brake to the CFR
(3) use a different NLE. Sony Vegas, from what I hear, will support VFR without problems. Most other NLEs will not, including Premiere Pro.
No problem with Adobe Premiere Pro 2014 - and then I upgraded to 2015. My first file/project now get this error when I play my video in the player draft. (screenshot included)
Video jumps backward and forward, the error window appears. And audio, of course breaks in and out. I tried to start with a new project. Fell to a simple piece of video in the project which had NO audio - always get the error and playback jumpy.
Of course, I wish I had not being updated, but it's too late now. And for the first time that the process REMOVED upgrade my 2014 version-, really sucks for my production schedule
Help - please!
How can I fix it?
How can I get CC 2014 Back!
There was some success workarounds for this problem. You can:
* Disable the input device listed in default of entry via the Device Manager (so that the default input device is "No. Device") available.
* Change the entry to something like line or microphone input device and a device and then connect this entry (even a pair of headphones will usually work for this)
* Alternatively, install Asio4All to provide an alternative to the MS driver listed under device class.
These options have been used successfully to solve this problem. The Premiere Pro team knows and is actively working to resolve this issue. If all goes well they'll have something soon!
I just started on a few Web sites have a problem when I stream movies. The audio is not synchronized with the video. I have experienced a few times in the past and could stop playback and restart to fix the problem. Which is not solved the problem now. I keep my empty cache, so this isn't the culprit.
It is only on a few Web sites and they have always played fine before. How to track down the problem?
Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
- Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
But only on a 4 k monitor. I tried everything... clean windows (10) installation and re-installed first
Also deleted the cache files... even added a sound card... and update all the drivers.
But nothing has solved the problem. Anyone have the same problem?
Hi, I found the answer. It has nothing to do with adobe itself. I had to just switch to diplay port into my monitor. Fixed
Hello, I hope I gave enough information below. I searched high and low for an answer to this and can not find a solution that has helped.
I have an audio problem be out of sync a few images when exporting.
First Pro Version CC using 2015.3 works on a Windows 7 PC with 16 GB of RAM.
Source footage is Panasonic Lumix g-7 MPEG Movie wrapped in .mp4.
Rate of the source footage is 59.94
No external codecs are used.
Here is a screen of the properties panel to one of the source images files in Windows.
Here is a screen of the sequence settings
Here are the screens of my export for video and Audio settings
Here is a screenshot of the properties of one of the image source files window and the properties of the sequence.
More large window - properties of the source images
Small window - properties of the sequence
However, the problem does not occur when I check the "Match sequence settings" at the top. I want to make so files won't be as big as when I pay with these settings. Just looking for YouTube, but even this preset produces the problem, I'm going to.
Any help is greatly appreciated!
The problem seems to be that I was unaware of a 2 ms latency when recording with a wireless LAV microphone system. I moved the audio advance 2ms and the delay has disappeared.
I have just installed Windows 8 and have also ordered: 12 items first.
I also have Windows movie maker.
When I play my clips in Premiere Elements, they audio and video synchronized early, but quickly get out. This does not happen with Windows Movie Maker and I had tested a few videos NCH also editing software and do not have this problem.
can someone tell me what I have to do to get this working right?
For troubleshooting purposes, assume that the video is characterized by a variable instead of a constant rate.
1. download and install the free program of handbrake.
Import your video 1280 x 720
Then, where it says "Chapter", I put for seconds
Locate, and then set your backup location for the file to process
Leave as is
Video codec H.264 (x 264)
Framerate (FPS) 23.976
and point next to Constant Framerate
Press start at the top right of the workspace
Wait for 'Queue finished' in the progress bar in the bottom left of the workspace.
Then determine if this H.264.mp4 file works for you in Premiere Elements project set the project preset manually set the
AVCHD LITE 720 p 24
This should rule in or out a possible variable rate being at the heart of the problem.
Download the latest BIOS updates and as requested my laptop network card, and now all the audio and videos, including on the internet, jump every few minutes.
Really annoying as didn't have the slightest idea on the computer technical stuff and it doesn't seem to be in any way ask Toshiba support.
Any help would be appreciated, I have a Satellite C650-152 with Windows 7.
Go into the BIOS (F2 when starting the laptop) and in the BIOS the BIOS default settings.
Press F9 for default settings.
Save the changes and restart the device.
May I ask if this product just streaming audio or video from the internet or have you noticed that play audio and video files stored on the HARD drive?
I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.
But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.
When you need more information to help me, let me know.
Hi Gunther, sorry you have problems with the SOUL. Looks like the sync is correct when exporting directly from the first, is that correct? Also, what format you export to SOUL & first? The problem of synchronization occur even if you export to a different format of the SOUL? You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.
If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.
I have video and audio in Mixcraft, export it to an .avi file, and then import it into APE8. For some reason any video and audio is out of sync way every time. Any suggestions? Thank you for always!
For sustainable development projects, MS AVI with CODEC DV/DVC is the right to choose. There are very, very little to gain with the AVI uncompressed, except much larger files.
After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.
I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.
Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.
I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.
For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.
8.1 - fully updated for Windows
NVIDIA GTX 780 video card
32 GB of ram
3770K i7 processor
All Nvidia drivers are also updated.
I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.
I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.
Matt Borchert wrote:
Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.
Thank you. In 2015, CC, you can click on the settings... button in the Audio hardware preferences. Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input. It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.
OK, people. I need your help. I have a looming deadline of THIS FRIDAY to put this.
I have a multicam editing over a show that runs 1 hour 20 minutes. It renders perfectly in the timeline panel, all the video and audio perfectly synced. Looks and sounds exactly like what I need.
When I export the video in form file H.264, audio not get synchronized with the video of 13 frames! But that's not all... It doesn't go to the complete audio track. There are about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and end of the video is aligned perfectly in sync. It is just the central part which is twisted.
What should I do?
This has never happened before, and I have worked extensively with multicam in first Pro CC before that. Never been a problem. I tried to uninstall and reinstall the first and also remove all media cache files, but still no dice. I also tried to copy the clips in a new sequence in the same project, copying the clips into a new sequence in a NEW project, the nesting of the sequence... nothing works.
MacBook Pro retina (Rev A)
First Pro CC (latest version)
Panasonic GH3 images in 1080 p 24 p AVCHD timeline
3 cameras & 1 audio file to WAV in Multicam
Any help would be greatly appreciated!
OK, I figured out how to fix it:
- In first Pro CC, choose SEQUENCE > DELETE RENDER FILES.
- Try to export the movie again.
It worked! I exported the same sequence, and it took a lot of time to do a new rendering of the audio files, but when it was finished export audio and video are in sync. I don't know what caused it, but this fix, so I hope anyone else having this problem can save a lot of time in reading this.
See you soon!
Maybe you are looking for
Hello in recent weeks, when I start the Firefox Os market, I see an HTML formatted without any layout. Somehow, I lost the page layout information. How can I get it back? The first idea was reinstalled on the market. But this isn't an app on the mark
Hello If you use VISTA SP1 RC2 or RTM shipped version last week with a 945GM Express chipset video you probably having trouble with the screen resolution to 800 x 600 on the release of sleep. INTEL has released a new version of the driver on their we
Hi, I have problems with writing the series. If I run in the debug (peak performance) mode it seems to write OK, but once out of debugging, it only works once in a while or if I send something to my VI for him to read first.
OfficeJet 6700 Premium and Windows 7. Keep the color ink when even in grayscale is set to black ink only and print all text black is set to enable. What's wrong? How can I solve this problem?
I have problem with HP P6325SC, it hangs at the HP boot screen (v5.13) if I boot with HARD drive attached to it. If I boot Ubuntu USB only, no drive attached HARD, the machine starts normally. SATA drives (with jumpers) are old, but they are working