audio and video synchronization on a file in the library media player Windows 7 Home Premium 64-bit

Similar Questions

• Anytime Upgrade used to go on Windows 7 Home Premium 64 - bit for Windows 7 Professional and now my computer is slow

  I run:
  Windows 7 Professional 64-bit (used for Windows 7 Home Premium 64-bit)
  Intel Core i7 - 2600 k CPU @ 3.40 GHz 3.70 GHz
  32 GB of RAM
  Seagate Barracuda 1 TB GB 7200 RPM HARD drive
  AMD Radeon HD 6800 Series

  I used the Express upgrade from Windows 7 Home Premium 64 - bit Windows 7 Professional 64-bit because Premium had a limit of 16 GB of ram.
  He checked and installed correctly without error.
  The main reason I wanted to be rid of this limit was because I could not watch any stream of twitch.tv.
  The upgrade has fixed my ability to watch the twitch.tv stream, but he gave me a problem which was even worse.
  Now, my computer is really slow.

  It takes a little longer than before to start.  When it is completely initialized, however, it is not as slow.  The mouse has just had a bit of lag.
  As soon as I try to use any application, my computer is really slow.

  For example: I open Mozilla Firefox.  There is a delay on when I type.  The mouse really gets lag.  With even just a 2nd tab open almost triple the slowness.

  It also occurs in Skype.  I'll have a delay in typing, and it's just slow in general.
  It also occurs in video games.  In World of Warcraft, for example, I used to get the full 60 fps in an area populated with max graphics.  Now, I rarely go above 10 frames per second with low graphics in an uninhabited area.
  Finally, it also occurs in the videos.  Let's say that I have 2 tabs open in Firefox.  This would normally have me delay like crazy if I try to do things (move the mouse, switch tabs, etc.).  If one of these 2 tabs is YouTube, and I watch a video, it drags you only if I try to move my mouse or tabs.  If I move all of my mouse, he plays the close video very well.  Even with the rivers Twitch.tv, Own3d, etc..  He accuses only if I move my mouse etc.  Also, if I don't move my mouse, the audio gets too quirky.  It's a kind of dubstep/robot/static noise.

  I tried to fix it or to limit the things:

  • Updated drivers
  • sfc/scannow (no problem)
  • Safe mode with network (always gal)
  • Service disabled for ALL , including Windows services (always gal)
  • Registry cleaned using CCcleaner
  • Clean a bunch of different caches and tempfiles.
  • A run each utility troubleshooting of Windows on my computer (only found no problem)
  • Reset my IP/TCP
  • The event logs recorded, but anything too rare.
  • Verified resource monitor, but my CPU usage is fine.  He's even not higher than 30-40% on the worst of the LAG.  Memory is also very good. It is used to 3 GB with 28 GB free.

  I tried a lot of things, but I don't remember right now.  I will edit this post when I remember or try new things.

  Thank you for taking the time to read my post and, I hope, provide input!

  I can tell you that registry cleaners are snake oil.  They do not help much, and they can cause problems.  Have you checked Device Manager to see if there is everything! or? for all entries?  Using a wireless mouse?  If so, try a wired.  Also, right-click computer and click Properties to see if he uses all the memory.  A number of people have found that they must make adjustments to get to use all of a large amount of RAM.  Your motherboard have integrated graphics?  If she and the CPU card or graphics are active at the same time, they may have a conflict, then you may have to disable in the BIOS.  Search for conflicting IRQ in system information.  Click Start and type system information into the search window.  Click on the + sign next to the hardware resources, and then click IRQ.

  Check the system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  Good luck.

• Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit

  I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.

  Today, I upgraded my computer to Windows 7 Home Premium 64-bit
  Now - my Windows 7 Desktop can access files on my XP laptop - BUT - I was no longer able to access to any shared files and folders on the Windows 7 desktop. I checked that matches the name of working group. And on the XP - when I go to the Add Assistant preferred network and make a Browse.When I select Microsoft Windows network and task force - I see my office listed. But when I try to select - the OK button remains grayed out.
  I would appreciate your help on this.

  Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.

  Thanks for your help, anyway.

• Windows 7 Home Premium 64 Bit and my DirectX diagnostic tool says that my current version is DirectX 11, but when I try to run space engineers, it tells me that I need to run DirectX 11

  * Original title: DirectX and space engineers

  Hello, I am running Windows 7 Home Premium 64 Bit and my diagnosis tool DirectX says that my current version is DirectX 11, but when I try to run space engineers and use a world with planets, he tells me that I need to run DirectX 11. When I go to my DirectX folder, it says that I am running DirectX 9.0, I'm very confused and internet only helped me at all up to this point. All suggestions/help and help will be greatly appreciated.

  Well, is it not a strange ball game? Minimum = DX9 and DX11 for planets.

  Looks like no shore leave for you then... :)

  "NOTE: the minimum requirements are enough to run the game, but without the global functions,

  which requires DirectX 11. »

  "When I go into my file DirectX it tells me that I'm running DirectX 9.0"

  Direct X folder?

  Win7 has DX9, 10 & 11. However, older graphics cards are not be able to use DX11 (or DX10 if old enough).

  It comes to graphics cards which are older than AMD HD 5000 (version ' 09) and Nvidia GTX 400 (exit 10) series.

  EDIT: This also applies to the older map HD4000 Intel integrated graphics (Inc., HD3000, and all the "GMA" graphic integrated).

  ----------------------

  -Here is a list of the .dll Direct X files you when files are updated.
  There are more files DX (Xinput and audio), but these are most of the graphs related to Direct X .dll

  Go to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
  -They are in alphabetical order and begin by d3dx9_24.dll > 43. Then d3dx10 - 33 43 >
  . & Finally d3dx11 - 42 43 >.
  It should also be--d3d9, d3d10 and d3d11. These come before the D3Dcompilers - 33 > 43.

  If all of these files is missing update Direct X using the DX Web Installer.

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  Sometimes, a file is corrupt (mainly by games always reinstall DX unnecessarily). I have this case

  DX must be reinstalled using the full DirectX redist (June 2010) -

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• need an iso file to install windows for windows vista Home premium 32-bit

  I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Large (100 gig +) file transfer fails in Windows 7 Home Premium 64-bit

  Hello

  I ran out of sensible troubleshooting options and am hoping that someone on the forum may be able to provide a solution or additional troubleshooting ideas.

  Scenario: I created a 178 concert file, an image of my old laptop XP file to be used for a virtual machine, on an external drive of USB3 for import to my new Windows 7 Home Premium 64 bit computer laptop (ASUS N61JQ i7, 4Gig of DDR3 RAM). Operation failed for copy of file on the Win 7 machine (current patches, drive D:, NTFS, 250 free concerts), without error messages, regardless of the method.

  Troubleshooting:

  Removes the file structure - exemplary fine for XP SP3 on a different machine, a smaller version (image of the C: drive only) copies very well to new laptop Win7 and creates the virtual machine that works.

  Eliminated the USB drive - used 2 different drives

  Eliminated from the USB - used Ports all three USB 2 and 3 ports and all failed, tried mapping to machine XP and do a drag and drop and copy and paste and even set up a ftp server on the Win 7 and tried machine download failed him via gigE and 802.11nall.

  More advice in this forum and others, I downloaded Teracopy who do not - this failed with a message indicating that "the operation failed due to a file system limitation", but wikipedia shows the limit of file of an order of magnitude larger than my 16 TB file.

  I also tried PowerShell coming to stop the copy without error message (resource monitor showed no activity on the external drive - the source of the file).

  I also have:

  • tried disabling / uninstalling antivirus
  • run the copy in safe mode
  • I tried to find answers in the newspaper of the events without success.

  All seemed to fail somewhere after 100 gig mark. Often (but not always) failures caused strange behavior, including being unable to , unable to task switch, unable to stop. Often (but not always) a power switch reboot was necessary. My suspicion is that the copy of file is using some pool of memory that is needed by other processes of basic and cause misfortune wide system.

  Interestingly, a new file by concatenating a line of 50 concerts three times for 150 gig in the same location as the destination file, a new file in target in the same place creating worked!

  After having exhausted the limits of my personal creativity I now submit this problem to the collective wisdom of the tribe. A big thank you in advance, Richard.

  Success!

  I tried another file copy utility FastCopy http://ipmsg.org/tools/fastcopy.html.en, he also failed, but with a slightly different error message:

  "The requested operation was not successful due to a file system limitation665"

  Search on Google that the message has led to this article:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/e0d55018-CF06-43ca-8e20-dd2bb8494c96

  ... his fundamental premise - de-Frag - did not help (drive was off fragmented already), but the link internally to:

  http://TechNet.Microsoft.com/en-us/library/cc781134%28WS.10%29.aspx

  which is a NTFS bible made me think on the compression of files and directories and of course the compression in this directory was put on, I never use the disk compression so I don't know how it's happened, but once set to 'off', the flow of the copy more than doubled and the copy proceeded until the end!

  Things that Microsoft might want to address:

  • I don't see anything in the literature suggesting there is a limitation to the compression of files. Fixing it, or the weakness of advertising would be a good thing
  • None of the built-in tools advised of an error or managed properly, one would think that NTFS has been mature enough so that it would no longer be a problem.

  Sort of, it's fixed now:

  Solution: COMPRESSION SET OFF

  Best regards and happy new year

  Richard

  

• No audio output device is installed (windows vista Home premium 32 - bit os servicepack) 2

  I have acer aspire 5520 windows vista Home premium 32-bit. That's almost 3 years when my father bought it.i portable listening using WMP, then all of a sudden my listening has been interrupted, idon't know why my sound card did not repond I put the mouse over the speaker icon in the taskbar and then the pop-up message displays "no audio output device is installed" then I tried to reinstall using the plug-in in windows mobility then after installing I rebooted my laptop then not sounds I heard windows logo.and start after logging in the Chamber retains an x icon and the message is always ""no audio output device is installed"... I tried to restore my system, but still it does not work and I tried to download the live update and I installed it but no sounds are coming and the same message appears but sometimes it '. works when I'm trying to reinstall my audio driver but after a reboot, the problem will exist

  Please help me solve this problem. show me some of your solution to solve this problem or send to my email add: * e-mail address is removed from the privacy *.

  Thank you
  zerofrancis

  http://en.kioskea.NET/forum/affich-28859-no-audio-output-device-installed

  http://forums.techguy.org/hardware/569059-no-audio-output-device-installed.html

• File ISO of Windows 7 Home Premium 64-bit download

  Hello

  I'm looking for a way to download the ISO of Windows 7 Home Premium 64-bit.
  The links on the site seem to be 2 years old and have led me to X 17-58997. ISO, but it seems to be a dated version that is not recognized.
  Thanks for the help!
  
  Original title: Windows 7 ISO

  While trying to load the files on the USB key, I get an error "error when copying windows installation files."

  Make sure that the USB device is formatted in FAT32 first. If you use the USB/DVD tool, try connecting the USB on a different USB port on the system, avoid using USB 1.1 or the front panel ports.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• More games and Windows 7 Home Premium 64-bit

  Hello Microsoft supports the team.

  I would like to play the older games like Dungeon Keeper2, Tomb Raider2 and Star Wars: the threat ghost on my Windows 7 Home Premium 64-bit. I tried to change the compatibility settings, and it does make a difference. If you could tell me about a good VM to use or something else, I would be gratefull, thank you.

  Kind regards.

  Jacques van Wyk

  For Dungeon Keeper 2, you can follow this guide, it can help.

  For Tomb Raider 2, I think I found something on this site, in any case I do not know if they have solved the problem (I'm Italian and I did not quite understand what they were doing), so try at your own risk.

  For Star Wars: The Phantom Menace tell him guide. (Possibly a 32-bit operating system, too)

  None of these reviews are officially supported and I have not test them, so continue at your own risk.
  Personally, I think that if you're someone who frequently use old video games (video games, you mentioned all have more than 10 years!), it would be more convenient to install Windows XP or at least Windows 7 32-bit (most of old video games was 16-bit: Windows 7 32 bit can handle most 16-bit applications in Windows 7 64 bit cannot) , or (even if it will affect the speed of the game) Windows 98 on a virtual machine (there are a lot of choises: Oracle VirtualBox, VMWare, Microsoft Virtual PC, etc...)

  Hope this helps, spero di essere stato of aiuto.

  Windows7RULES.

• files that are about 50 MB or more, can not be downloaded the integrity of my windows 7 Home premium

  files that are about 50 MB or more, can not be downloaded the integrity of my windows 7 Home premium

  for example, to install the Java SDK downloaded by my laptop, will appear a message a .cab file is corrupted, and I have to cancel the installation. However, if use the package downloaded by my friend, it works correctly.

  The most common causes are

  (1) a bad internet connection leading to corrupt downloads.

  (2) malicious software on the system that infect downloads.

  We cannot do anything on the first of these forums - so...

  Download and install Malwarebytes Anti-malware (free version) - uncheck "Activate the free trial version of MBAM PRO" at the end of installation - www.malwarebytes.org and update to update, then run a complete analysis of your main account and quick scans in all other user accounts.

  Remove what it finds

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• driver ethernet controller and Windows 7 Home Premium 64 bit HP 110-3000 pci device driver missing

  I need the driver for ethernet controller and pci for Windows 7 Home Premium 64 bit device driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  Hello

  Try the following:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48885.exe

  Kind regards

  DP - K