Similar Questions

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• Media Player... Whenever I try to play a video, I get only audio but no video

  Whenever I try to play a video, I get only audio but no video

  Can someone help me

  Hi Pedro Gonzalez h,.

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the accurate and complete error message you get when you try to run?
  2 did you do any change to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2
  I suggest you try the steps from the following link:

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11
  http://support.Microsoft.com/kb/926373

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• Flash Player plays audio but no video

  The Flash player on my computer plays audio but no video.  The screen is blank.  If I move my mouse over the screen, sometimes, the video will be momentarily but then disappear.  This happened for months

  I tried uninstalling and reinstalling several times.  I've disabled ActiveX filtering and enabled the Flash module.

  When I go to Test Flash Site, I can see the animation of the ball moving across the screen.   And he tells me that the program is installed successfully.

  When I search the Flash program on my computer I can't find it.  Also, I can't find the AppData folder.

  I have the version 11.1.102.55

  Windows 7 / 64-bit

  THAT IS TO SAY 9

  Windows: How do I update the device driver for my graphics/video card?

  Or

  How to disable or enable hardware acceleration?

  But don't go to page find Flash Player Version but instead go to: http://www.adobe.com/software/flash/about/

  And right-click the area under Adobe Flash Player.

• With media player, I get audio but no video. What is the problem?

  Whether it's a wvm file or not, I get a black screen with audio only.

  Hi newbewon1

  1. you try to play a WMV file?
  2. what operating system is installed on the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  For resolution, please refer to the procedure below and identify what codec was used to compress the file. You must install the codec even on the computer to read the file. There is no absolute way to do that, but here are your best options:

  ·          To determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  ·          Use a non-Microsoft codec identification tool. Many are available on the Internet.

  So you can check if the installation using the correct codec solve you the problem. You can use your favorite search engine to download and install the codec. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://www.Microsoft.com/downloads/en/default.aspx

  http://support.Microsoft.com/kb/316992

  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Export the problem, Audio, but no video!

  Hello

  I have a lot of trouble to export my last video on first cs6.

  Im a long time user of FCPX and traded just at adobe, so I'm a bit useless with this new program.

  My sequence setting are:

  Editing mode: Custom

  Time Base: 59,94 frames per second

  Image size: 1920-1080

  Video highlights:

  file format: AVI microsoft

  Codec GoPro CineFi = orm codec (x 64) v9.1.1

  The film is mainly images of GoPro Hero 4 Silver.

  I tried so many different export options.

  Export to 'fit the setting of the sequence' produced a video that has audio, but no picture.

  Export to the h.264 format does not allow me to increase the rate of 30 frames per second to the original and give the error message "Invalid framesize/framerate for this level. Please reduce the bounds parameter video or frame rate, or increase the profile and level and try again "."

  Export to quicktime is the only one so far who has produced, photo and audio, but the quality is far below what it should be... and yes I have made maximum use of verified quality.

  Any help would be thank you very much!

  Do not use match sequence settings which means that it uses the codec to preview.

  This is the cineform codec.

  Don't think that you can export to cineform with cs6, unless you have installed the codec.

  What is the final destination of your movie going to be?

  If its Youtube, choose a preset that lies under h., 264 format in the export settings.

  [QUOTE] ' Invalid framesize/framerate for this level. Please reduce the bounds parameter video or frame rate, or increase the profile and level and try again "." [QUOTE]

  Do what is said to increase the profile (5.1/5.2) and higher (high) level of framerate.

• Flash will load audio but not video... and then crashes...

  Flash will load the audio from a video, but the video display will be green.  The player then crashes.  Initially, this was just my videos from YouTube.com, but now I have problems with Windows Media Player Classic (and sometimes with Windows Media Player).  I tried uninstalling and reinstalling several times.  Flash is not displayed in my programs, but can I uninstall in Control Panel.

  I have Windows 7 and 64-bit.

  I use the 10.3.181.34 version.  According to http://www.adobe.com/software/flash/about/ I have a flash installed successfully.  Yes, I see the image.

  These are the files in my SysWOW64 > C:\windows\system32\macromed > Flash

  Flash10m.ocx

  FlashInstall.log

  flashplayer. XPT

  FlashUtil10u_Plugin.exe

  install.log

  Npswf32.dll

  I use Firefox 5.  Shockwave Flash 10.3.181.34 is enabled.

  I have no idea what to do. Help.

  As soon as I read 'green' in any position, the first thing that comes to mind is to disable hardware acceleration.  Right-click on the Flash Player test page and select settings.  Then on the display panel uncheck "enable hardware acceleration".

• Audio, but no video

  I watch a service online and it worked very well. Then I went to watch and I was able to hear the audio but not see the video. It shows just a black screen, but I can hear it. I've updated the flash player and I see it flash on the website video and it says flash player installed. Video live using Flowplayer and I have Mac OS x I downloaded the good flash player for Mac OSX too.

  Try turning off hardware acceleration (Flash Player settings).

• Store TV +: hear audio but no video playback of MKV files

  Just bought a Store TV + MEDIA BOX.

  Downloaded MKV files that play perfectly on my PC.
  Part of the charge of video files up - can hear the sound but no video.
  Any comments would be me appreciated

  > Part of the load of video files up - can hear the sound but no video

  In this case play some video files only?
  Maybe these movies support another format or standard.
  As far as I know the audio and video formats supported are:

  Audio files: MP3, WMA, WAV, AAC, OGG, FLAC, LPCM Dolby Digital, DTS Digital

  Video: MPEG1 (DAT, MPG), MPEG2 (VOB, MPG, TS/M2TS/TP TRP), MPEG4 (AVI, MP4, MKV), VC-1 (WMV), H.264 (AVI, MKV, MOV, MP4), RM/RMVB (RM/RMVB)

• WndOws Media Player plays audio but no video

  Windows media player

  When itry to play jeuvideode file with media player, it will play audio but not the vidio but it will play the video in minimized mode, but if I try to optimize it disappears just off the coast of the screen of the monitor in the corner at the top right of the screen

  Hi John,.

  ·         Since when are you facing this problem?

  ·         You did changes to the player before the show?

  ·         This happens with any specific video?

  Step 1: Try reducing video hardware acceleration in Windows Media Player.

  a. in Windows Media Player, on the Tools menu, click Options.

  b. on the performance , under video Accelerationtab, move the slider more close votes to zero, and then click OK.

  If this allows you to play videos very well, this indicates that there is a problem with your graphics card or driver.

  Step 2: You can get an updated driver from the manufacturer of the display adapter.

• Burner DVD plays audio but no video

  my version of media player play only video no sound, I uninstalled my ultimate nero 7 has reinstalled it now all I get is audio I changed as dvd burner and used a different dvd

  No guarantee, but the following may be worth a try:

  Try to do a system restore to a time before you uninstalled Nero.

  Then download and install the following filter:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/projects/AC3Filter/releases
  (tests - AC3Filter 1.63 full b)

• Audio but no video... WVC54GCA

  Hello!

  I've just set up a wireless G Linksys router last night. Works very well. I unplugged my laptop the router and used the wireless connection and that the excellent work.

  I bought the camera and put in place as well. I had a few problems with the installation, so I changed the IP address of the router to ".". 1 "to". 9 ". I had to do it before with DSL because of problems with the modem and reconnected my laptop with ethernet cable. For some reason, it worked. The camera then showed the "." 9' as the access point. I saved and installed the camera management software.

  This is where the problem begins:

  The camera will feed audio. The microphone works. The screen where I'm supposed to see the video does not work. He's black. I think he was using port 80. I know I should have tried to use the camera via a cat6 cable, but I did not. There is an IP address ending par.100 showing on the software which was different from my router which montrait.102. I've changed too much a.100 ou.102 nothing works.

  I'm a noob with this stuff. What I am doing wrong?

  Thank you!

  He returned, exchanged, works fine now.

• . I have Windows Vista Home Premium. When I try to play a video file that is attached to my Windows Mail, playing audio but the video is not displayed on the screen.

  Because video (photo) is not shown there is no window to control me, IE; delete, stop. I have to wait until the audio stop. I can even click on another email and the audion continues until it stops on its own. Very frustrating.

  I've recently updated to IE9 and this problem started. I can see the other attachments, photos, etc., but must double-click on the icon of attachment (paperclip) displayed next to the email listed. Attachment icon does not appear with the body of the message. There is also a change from my old e-mail program used before you download IE9. I think I liked much better IE8!

  Hi JeanneChancellor,

  ·         What is the file format of the attachment?

  Method 1: Try saving the file to the computer and check for the issue.

  Method 2: Check if the update of Codecs can help with the issue.

  Codecs: Frequently asked questions

  See also:

  Solve problems with Windows Mail

• Timeline of audio but no video.

  Hello. In PrProCS5 in only one of the six sequences, the program area is empty and only audio video time-no.

  There is no solid red line showing the chronology of this sequence in the other 5.

  I went to export media in the SOUL so I can write the disc (with problems still send but have had success with SOUL then use architect to write the disc).

  It also fails now.

  Hope someone can help me with this. It's frustrating.

  Thank you. Janice

  RESPONDED. I clicked off the track of toggle and toggle Sync Lock in the timeline of the video and BINGO, the video is back!

  Large.

• Exports of audio, but no video

  I am very new for Premiere Pro and just finished a video and tried to export it as a .avi (uncompressed), but for some reason when I open the file after it is done to export with Windows Media Player, I get only audio. I'm not sure what I'm doing wrong, video Export box is checked, I'm sure he didn't need too much space, and I tried it with the range of the source being the entire sequence and workspace. What should I do?

  Do not use this export option.  It should be used only with the hardware installed AJA.

  Instead, choose AVI and under the video Codec, choose None.

  You can also install the codec free of UT and select that.

  UT Codec video Suite 15.2.0

  It is lossless, so that uncompressed quality, but a much smaller file.  And it should play very well outside the media players.

  On this subject, the two most common players, Windows Media Player and QuickTime player, are also the two worst players out there.  Try one of them instead.

  PotPlayer 1.6.54915 / 1.6.55052 Beta

  VideoLAN - official page for VLC media player, the video frame Open Source!