Audio capture on Simulator does not

I am writing an application that captures the sounds.  He has used the technique described in the javadoc for RecordControl.  My code works fine when it is installed on my Curve 8330.  But when run on the Simulator, it seems to work, but no data is never written to the record output stream (suggests that the Simulator is not my microphone audio routing).

I'm under BlackBerry JDE plug-in for Eclipse and the BlackBerry JDE v4.5 component Pack.  I tried all the profiles profiles 8300 Simulator and no capture any sound.  I rechecked my microphone is not muted, and other applications to record on my WinXP box actually capture sound.

Is this something that should work in the Simulator?  I have to configure something to give the access the audio in Windows JVM Simulator?

I think I have solved my problem.  Last night, I restarted eclipse and everything started working as expected.

Honestly, I don't know why this correction of the problem but have a hint.  I started eclipse earlier in the data via a Remote Desktop Session.  I don't know the details of how the JVM determines with the source sound/sinks are available.  But I imagine that the process of the eclipse didn't see any sound source because I was connected via RDP.  And it took a reboot once directly connected so he can see all IO ports.

Tags: BlackBerry Developers

Similar Questions

  • Simulation does not stop in the Loop Simulation & control

    I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

    Now, I've implemented nearlly all, but now the simulation does not stop.

    First here is a picture of the .vi when it still works:

    But this isn't the end result, I want to have.

    I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

    You can see from the image below:

    If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

    The .vi is attached. I hope someone can help me.

    I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

    But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

  • simulation does not work

    I composed a few diodes the wizard of components, such as the diode acts like a switch perfect to 0.7 volts.  For some reason any SPICE simulation does not run.   If I include one of these diodes in other circuits, the circuit will not simulate.  The diode model is the problem.   Any ideas how to operate?  Attached is the file multisim

    Thanks in advance!

    "- Checking SPICE netlist for perfectbridge - Thursday, February 5, 2015, 11:51:34-"
    = SPICE Netlist verification completed, 0 error (s), 0 warning (s) =.
    Model 'diodeperfect__perfectdiodes__1': 'IS' parameter must be greater than zero
    doAnalyses: incorrect use of the parameters of the model
    Cancelled simulation. "

    So: right-click on one of the diodes, select 'Properties' - 'Value' tab - press "Change model" button - box 'Use default' for 'IS' - press "Change all 4 elements" - press "OK".

  • PlayBook Simulator does not start in vmware.

    I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

    But the playbook Simulator does not start on vmware... He simply display the splash screen...

    Do you have another computer to try out it?

    For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

    I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

    Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

    FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

    HTH - Rufus

  • Email and Services of MDS Simulator does not not on Windows 7

    Email and Services of MDS Simulator does not not on Windows 7

    Finally, resolved. There is no need to edit the file of commands or anything else. Everything you need to install Email and MDS Services Simulator and simulator of Smartphone in C:\Research In Motion instead of C:\Program Research In Motion.

    Best regards

  • When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

    Black screen in Windows Media Center during the TV

    When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

    TV works on the other program I have and has been workign on MC last week, but now I don't?

    Some success with this issue (its OK, but BLACK) video for live/recorded TV

    ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
    (2) restart Win7 64-bit
    (3) Win7 located & reinstalled the drivers
    (4) VOILA!   Real video and audio live & recorded TV

    BTW - before above fix in Device Manager:
    Notice anything in his video & Game Controllers
    'Properties' reported 'this device is functioning.
    "Update drivers" reported "... software driver...»
    ... and no updates of WMC anywhere in sight

    Go figure!

  • Icon audio SigmaTel (blue square) does not.

    original title: SigmaTel audio icon (blue square) does not. I've upgraded from Vista to Windows 7 and the blue square with white bars no longer appears. I get a white square with very fine blue points.

    I tried to update the driver but it still does not work.

    I just want to know how I can fix the problem and keep the icon (blue square with white bars) appear again.

    Thanks in advance...

    You'll need to re-post giving your PC/Laptop, model name brand and exact model number.

    Or go to the manufacturer's Web site, locate the download page for her and, to install the specific audio drivers for W7.
    If there is none, download and install the Vista drivers in compatibility mode. You may (or may not) get a certain amount of nombreauses.
    See you soon,.
    Jerry
  • Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

    Greetings.

    I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

    Shortly after installation, the application is an update.

    Your help is apprecaited to understand what is happening...

    Steps to recreate:

    1. start multisim.

    2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

    3. use 'switch' at the top right of the appliation multisim window to run the simulation.

    4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

    5. use the switch to stop the simulation.

    6. no change in the circuit or lighting of the lamp measures.

    7. same results if the simulation starts the arrow and the red square are used to start and stop.

    If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

    This is the case with several circuits, those provided by the College and the other that I created based on the same design.

    Multisim restarting has no effect to correct this observation.

    It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

    I captured the homerun status after stopping the simulation.

    Thanks in advance for your help.

    Zan

    Hi zanzarista,

    Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

    It is the way in which the software is intended to work.

    I hope this works.

  • Why deletion of images of iPhone 4, iOS 7.1.2 with Capture of Image does not work?

    Using the key delete does not work and selecting 'Remove' in the edition menu is grayed out.

    Hi Varoop13,

    Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with your iPhone and Capture of Image. I'm a little unclear on exactly which version of Mac OS X you are using or what you see in the Image Capture, but you may want to look for a button with a circle-slash () icon; It's recent releases how Capture of image mark the delete key. It will be active when one or more images have been selected. It is also a behavior whereas the keyboard delete key will not remove the images selected, and that the delete option under the Edit menu stay grayed out. You can see some of these options, it is stated in the following article:

    Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list () or to display larger thumbnails (), or to rotate () or delete () images.

    Transfer pictures - Image Capture help

    Concerning

  • Microsoft Flight Simulator does not work

    My husband is having a problem with his flight simulator.  After that, it installs the software, it is able to play.  However, after this first piece, once he leaves the program and try to open it again, it will not load.  The programs displayed on the hard disk but does not work.  It uninstalled and re installed the program, with the same result.  After the initial piece after installation, it is not able to play again.

    Hello

    Here is a link that should prove beneficial to get a resolution to your inquiry.  I hope that this information is beneficial.

    http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/24974b97-BCEE-46EA-8f52-f7ad0881125a

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Turn coordinator instrument in flight simulator does not

    I have a Windows XP 32 bit operating system. Microsoft Flight Simulator 2004 with v9.1 to date is
    installed. Also the Saitek Cyborg V.1 Flight Stick and Pro Flight Rudder pedals are installed. The
    Tour Coordinator instrument watch Bank (angled wings), but the ball does not move to the
    neutral during turns to react. How can I enable this feature? Thank you, Lee Allen

    Check out this link.

    http://support.Microsoft.com/kb/823631
    http://support.Microsoft.com/kb/894733

    Happy new year!

  • No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

    I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

    Install the audio for the brand device drivers and the computer audio device model you have.

    (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

  • No audio, cd/dvd devices does not work, can not update via Microsoft Update, usb memory sticks not recognized and much more

    The initial problem was no audio sound on CD.  The computer had other system sounds.  I uninstalled the Realtek drivers and downloaded from the website computer and reinstalled.  Still the same problem. I tried to adjust the volume control and clicked the speaker at the bottom on the right bar.  I got a message saying there is no mixer device and the small speaker disappeared and reappeared even after several reboots.  There is also an error "no audio device".

    After reboot, the computer gives this error message: "Generic Host process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

    While trying to find a solution on the web, I discovered that the computer does not recognize the usb key,
    It won't restore to an earlier time,
    the CD/DVD drive will not run the data disks

    and Windows Update will not update.  The error message said: "the site has encountered a problem and cannot display the page you are trying to show."  There is an error number: 0x800706BE I tried to find this error message on the MS knowledge base, but it is not listed.

    The last Windows Update was on April 16, 2009 so I tried to restore to April 15, but it says 'system restore is not able to protect your computer.  Restart your computer and restart System Restore. "    After the reboot, the same thing happens.

    Any help is appreciated.

    The data is not "hostage." Pull the disk and put it in a box disc or it slave to a working computer and retrieve the data. If you don't have an additional computer you will need to borrow a friend or with the machine at a tech. You can also try the o with a Linux Live CD boot. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.

    Whatever you do, do not install Windows without test material. If the hardware is at fault, software solutions like reinstalling Windows will be unnecessary. MS - MVP - Elephant Boy computers - don't panic!

  • Audio Dell by MAXX does not work with external soun card

    Hi, I use my Dell Inspiron 15 7537 with Win 8.1
    I plug in external audio interface / sound card Focusrite Scarlett 2i4.
    I installed the drivers and all the inputs/outputs work fine when they are defined in the Windows Audio Manager.
    But in the application Dell Audio (supplied with Windows), I can not change any settings, Sound does not change. (Looks like the settings to change the internal souncard output, but not outside :()
    I love this app Audio Dell with EQ etc. But can I use it with my external USB sound card?

    Thank you!
    David of the Czech rep.

    Duvik
    But can I use it with my external USB sound card?

    Hello David. The answer is no. WavesMaxx is a software that is supplied with the audio driver from Realtek and works only with the Realtek audio hardware on the motherboard.

  • 0.9.4 Simulator does not

    Hey everybody,

    I installed a new virtual machine to the 0.9.4 Simulator and we found that it does not load (just sitting on the blackberry Playbook loading animation)

    Previous simulators worked properly.

    I tried the CPU both 1 and 2

    RAM is set to 1 GB

    Graphics acceleration is on.

    Computer: Core I7, 4 GB Ram, Windows 7 Pro 64, VMWare Player 3.1.3

    I just launched the 0.9.3 Simulator and it works properly.

    Anyone else having these problems? I searched this forum and have not found anything this either so forgive me if this has been posted and there is an accepted solution.

    -Ryan

    I don't know if this applies to you, but on my laptop, I normally keep 3D disabled for the OS, so my laptop overheating.

    I had that light as well

    Control panel / display / settings / advanced / troubleshooting / hardware acceleration / full (on XP)

Maybe you are looking for