Audio device goes away after I turned off the HDMI audio device.

Similar Questions

• I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  If you want to reformat the hard disk, in erasing all data on the computer, there is no need to uninstall.  Deactivation is sufficient.

• S580 Player restarts automatically after I turned off the tv

  When I turn off my TV, it also turns off my Blu - ray player through a kind of hdmi handshake. but for some reason my s580 is going to restart one or two minutes later. Anyone know what setting I'm supposed to solve? or what I'm supposed to do? I tried going though the menus on the TV and the player, not luck.

  Hello

  Welcome to the community of Sony.

  What is the cable used to connect the BD player to TV? The Blu - ray Disc (BD) player turns off automatically if it is connected using HDMI cables to a TV that has the BRAVIA Sync function and the control for HDMI function is set to ON. The BRAVIA Sync function will turn off the BD drive whenever the TV is turned off.

  Also, make sure that the BD player has updated the firmware in it.

  If my post answered your question, please mark it as an "accepted Solution".

• Why after I turned off the computer num chance works also

  Please can you help me fix my computer

  Could you try that again once please, no information is here so I can't help you.

  'Why once I turned off the computer... also numlock works' looks that separate the 2 points, so could you please develop and provide more information.

  How to ask a question:

  http://support.Microsoft.com/kb/555375

• game does not load after you turn off the flash of pepper

  I play a wgt golf game, the game said if I were haveng problems turn off the flash of pepper and I did it and now the game does not load happens to 77% it stops there. Ive been trying to find how to activate the pepper flash then maybe I can play the game but no luck. I can play the game on my other computer without any problem, please help

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Windows

  Mylenium

• BlackBerry Smartphones can not remove grayed files after you turn off the WiFi sync

  I got sync music WiFi on, but after I left the proximity of my WiFi, there more grayed out 1,000 entered the path of my browsing in the 100 or if the files that are available locally on the device.

  Then I turned off sync music Manager Office, but even after many cycles of connection/disconnection between BB & USB WiFi, all these files in gray are always in the way on the music of the BB icon tag navigation interface.

  How can I uninstall this feature? Otherwise, how could I make my icon music works as he did, not broken by WiFi-sync as it is now?

  Please notify.

  If you want to uninstall WiFi Sync, please go to the Options icon > device > application > search for WiFi Sync and delete

• Stay of connector on cable network after having turned off the Satellite Pro A120

  Hello

  The green light from the connector of the network cable to the back of the laptop turned on when the laptop is turned off (no cable is connected).
  It doesn't matter if it's on battery or power. And when it is turned on, the light goes out.

  Any idea?

  Thank you

  KAV

  Hello!

  Is in the BIOS wake up on LAN enabled? Try turning it off.

  In addition an update of the BIOS if you n t to have the latest version.

  Good bye

• Satellite L750-1E5 - after that turn off the led at the front lights up

  Can someone tell me why the light in front on my laptop stays on after I've stop it?

  It s the light next to the power icon and after I ve closed the light changes from white to orange and stays on even though I ve removed the charger (it doesn't blink or dim). The laptop is only 1 month and he has not done this when buying.

  Help, please!

  Hello

  Please check this:
  

  and tell us which LED is always on when your laptop is turned off.

• How to install a driver after you turn off the auto-update

  I disabled auto-update Windows Update drivers by following the instructions in the following article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/disable-auto-install-drivers/61d02eb2-C131-44BF-b743-d614f0189cf2?TM=1347039132644
  It was due to the update of Windows Installer drivers on top of my existing bluetooth drivers and prevent the unit to work. I had to reinstall Windows to solve this, UN-installing then the installation of the Dell printer drivers did not work.
  I just bought a Freecom 2 to drive that connects via eSATA. Unfortunately, the instructions say that I don't need to install drivers because Windows will do it automatically! Ugh.
  I am reluctant to turn to the auto-update as it will probably destroy bluetooth again. So the question is: How can I install Freecom drivers and the problem of bluetooth do not breed take the risk?
  Note: Looking at the dialog box "want you Windows to download the driver software? ' there is an option to" install the driver software from Windows Update if it does not appear on my computer.
  Well well... driver Dell bluetooth software is on my computer (the software to install, it is on my C: drive and it is also installed) so not preventing him to get the version of Windows Update? I am concerned about the confidence that, given that the driver has been installed also the last time he downloaded the MS driver (although the auto-update feature was turned on at that time here). I'm afraid to think that the Dell driver's oldest (who is) and so he gets crushed.
  Thanks in advance.

  "the fact that the manual says that he needs a driver to be"automatically installed by the operating system"suggests that... he needs Windows Update."

  (1) while I don't have an external HARD drive in a box I have a case of a slot for external e-SATA replaceable hot which is about the same as a commercial external HDD, but without the box.
  When I plug in a HARD drive into the slot in Windows automatically detects the drive.
  Windows should automatically install the drivers for basic/generic for most of the devices when it detects something new just to be attached/connected. Once Windows did, this 'device' must be posted from there on.
  This is not the same thing as let the Windows updates to install the drivers.

  So, when you plug in the external hard drive on e-SATA port, the first time Windows pops up a similar message to-"new device detected... the driver installation, you can check if the device is detected and drivers are installed by going to computer management > Device Manager to see if your external HARD drive is on the list of hard drives."
  If non - R / click on hard drives and click "search physical changes.
  There is also an option here to update the drivers.

  You are quite correct disable optional updates.
  It is not a recommended option, especially for the graphics drivers and chipset.
  Personally, if the mfg of the material provides drivers on their website always download and install the drivers manually.
  As a result of that it is prudent to updated Windows configuration only updates are available so you can choose which you want to install and choose to install it on your own time inform.
  This way you can close applications and browsers and better to avoid the possibility of corruption updated leaving the priority update. It is also
  more course with a clean install of Windows to start with sp1, and then do the other updates in small batches.

  2. when the HARD drive is connected and recognized in the Device Manager are moving
  for the computer management > disk management. This shows the good
  for HARD drive capacity?
  If the HARD drive has only a small partition and unallocated space that is perhaps why only a small capacity is shown elsewhere.  You can format the HARD drive and
  create a new Partition or Partitions here.

  "b if I uninstall/remove device, then as soon as I tried to install the driver from the manufacturer it seemed to install ok, but... still bluetooth didn't work." It simply detects all devices everything I tried. »

  Have you tried the fix .NET? .NET can be damaged and should be
  updated in all cases.
  It's been awhile, so I don't remember why (safety improvement?) but I uninstalled .NET and reinstalled with. NET4.
  DOWNLOAD: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download details

  .

• The user account cannot access the internet once parental used contract, even after you turn off the parental control

  I created a user account for my child. I am able to access the internet through firefox. Then I set the parental controls and can NOT access the internet more. I turn off parental controls for this user account. I still can't access the internet from this account.

  Parental control is a part of the operating system Windows and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

• Access after you turn off the router/nat [WCG200 v1]

  I use the WC200v1 for a while and it was a lot of work.  I disabled the router/Nat and comes to be used as a modem only.  After you disable the routing/Nat, you are given an IP address, which still allows access to the device.  I don't remember what is this IP address.

  I have another device offering routing/WAP capability.  The WCG200 acts ONLY as a modem.

  Someone knows what IP to use to still access the device or should I just connect my PC directly after performing a factory reset.

  Thank you!

  -t0ken

  Use http://192.168.100.1/ router and Nat have been disabled.

• Annoying noise, even after you turn off the sound pop up

  I don't know how to get rid of this annoying noise on my computer. Initially as if it's the pop - up, but I turned it off n keep me this annoying noise... someone can tell me how to stop... Thank you

  Please read my last post:

  1. DESCRIBE the sound - beep, snoring, thud?

  2 is him coming from your speakers or your PC?

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• After you turn off the root of the directory utility user, I went back to the main screen and all other user accounts showed is no longer at the start, as they were before you enable the root user.  Help.  Please, I beg you.

  I have activated the user 'root '.  It was an attempt (for the sake of granddaughter age) to check its history since I am the administrator.  Realizing that this method was much more complicated than what I am capable of managing, I returned the utility program directory and disabled the user 'root '.  I thought that everything was ok, as I did not made anything while connected as user 'root '.  Instead, restart the computer, all users, including myself were no longer at the start.  The only point was a blank user name and password.  No picture.  No guest.  No user.  How to return those and I did something to cause this?

  Else you being logged in as root?

  Activation and deactivation, then root should not have caused that.

  Also, having allowed root is one of the ways you get a login screen showing only the name and the password.

  You should be able to type in your user name and password to connect.

  One time connected, check users & groups system prefs, Connection Options and make sure he's on the list of users. You will have to click on the padlock at the bottom to make changes.

• I can't upload photos to email or FB even after it turned off the firewall. Can U help me?

  I can't access FB or email items or first... Alreadydeactivated Windown firewall? @

  Moving to Photoshop Elements

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.