Audio does not work in Windows, Safari 5.1.7 - Captivate v8 (HTML5)

Similar Questions

• Effects of Dolby Advanced Audio does not work on Windows 8.1

  Hello

  I've upgraded my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8: Control Panel in the equalizer Dolby works but switch the Dolby Advanced Audio check box has no effect, so there is no more virtualization surround and 3 effects 'Movie', 'Music', and 'The voice' don't work anymore.

  Now my computer laptop speakers sounds choppy... Could you help me solve this problem?

  OK I tried a lot of IDT Audio Driver version and I found one that works correctly with Windows 8.1: the 6.10.6482 version. Here are the questions I lived on other versions of this driver:

  6.10.6425 to 6.10.6466 : Dolby effects working correctly, by speakers is good, but in the headphones sound is not "strengthen". Equalizer does not work.

  6.10.6491 and more : Equalizer works but other effects dolby (Surround virtualization, Volume Leveler, etc.) does not work and the sound from the speakers of the laptop is low (even at 100%).

  If you have Dolby Advanced Audio V2, 8.1 Windows on your PC and you meet one of these questions, the 6.10.6482 driver is the best for you, because all the features (virtualization Surround, Volume Leveler, equalizer, etc.) works.

  To download: click here and follow the instructions on the screen.

  HP so please update drivers download pages... Ex: 2242sf drivers page, it is only the IDT 6.10.6425 driver for Windows 8.1 while the 6.10.6482 is available on other sites.

• HP Compaq dc5800 microtour format: Audio does not work after Windows 10

  I've updated from WIndows 7 to Windows 10 in March; on board his system worked right here. Since updates this summer (July 12, I think, although it could be later), the internal speakers don't work. the computer does not detect the presence of the internal speakers (only external speakers and microphone).

  I tried using the Device Manager to update the drivers: controllers audio and audio - HD Audio device - runs the update and says my drivers are up to date (but only registers external speakers). I tried the HP site you are looking for the driver that is compatible with my setup - no luck.

  You can either help me get the driver link or to suggest another solution? Is it possible to retrieve and use (for example) the driver I had for Windows 7? or an earlier operating system?

  Thank you!

  Hello:

  See if it works...

  I used the W7 ADI soundmax audio driver on my dc7800, which uses the same audio chip.

  It's the support dc5800 page...

  This package contains the driver for the ADI Audio CODEC high definition (HD) in desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45615.exe

  Then, you need to enable playback in the soundmax Control Panel, restart the PC and select the speaker in the management section of audio devices in the control panel (hardware and sound).

• Audio does not work in Windows 7 media center TV until I have change the channel!

  I have windows 7 ultimate with an analogue of PCTV PCI TV card 110. Whenever I start live TV in Windows media Center, there is no Audio data. But after changing the channel, the audio begins to work!

  Not a problem if used to watch TV. But the records get recorded without sound.

  Hello helloyul,

  Have you tried the utilities listed here?
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  Let us know if it helps.

  Marilyn

• Desktop HP Pavilion p7-1016ukm: beats audio does not work on windows 10

  
  

  Hello:

  See if this driver IDT HD works.  Install and reboot the PC...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?

• Why aac audio does not work in PowerProducer Windows Vista 32-bit?

  My friend has a Blu - Ray burner that is packed with PowerProducer 5. They have installed on their PC 32-bit of Windows Vista. Its HD files AAC audio camera mp4 video. The audio does not work in the environment creation of PP, or burned discs. I downloaded all the codecs. The audio works fine in WMP and QT, as well as in Windows Movie Maker. Installed the same software on my Windows 7 computer and audio works very well.

  I have contacted Cyberlink, makers of PowerProducer, and they said that the limited packaged version of the software does not support the AAC. They suggested that upgrade to the full version for $50. Obviously, I'm not quite confident in this response.
  Someone has an idea of what might be past or have suggestions of what to try to fix the error?

  Hi ClintWatson,

  Because the problem is specific to this particular application, I suggest you to contact CyberLink support for better support.
  http://Forum.CyberLink.com/Forum/forums/show/3.page

• Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Sometimes the audio does not work and another day, everything is ok. What can this be?  IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Hello Ronald.

  A problem are not uncommon. Something for you to try:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Beats Audio DOES not work after update windows 10.

  Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

  Guys, please help. The audio is not good without configuration Audio Beat.

  Thank you

  Jain darshan.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Audio does not work after an update in Windows 8

  I use a laptop HP Folio 9470 m... Last week some update was installed to win 8 and after that my audio is not working properly. Every time when I need to play a song or a movie, or watch something on the Internet, I need first logout, then after logging in first, I need to open the drive. Other wise the audio does not work... Whenever I check to test the speakers, it shows its used by another application, but there is no application by using the audio device. I checked all the drivers, and everything is right in there... But I don't understand that either the app using the audio device in the background... I even reconfigured my system, suspecting it was a virus. But after installing the operating system first two days, that it worked fine, and then a few updates got installed, now return to the box starting... I can see the updates which has installed, but cannot identify the one which may cause this disorder...

  One, any help is deeply appreciated.

  Thanks in advance...

  AG.

  07/11/14 - the problem is caused by the updates of security KB2964736 and KB2965788, which has turned off the sound from the speakers and output microphone of my VAIO laptop, as well as all the features in iTunes.

  I was able to determine that, because now, I manually install updates after the last problems caused by automatic updates. Having discovered this problem, I did a system restore to before the updates to get my sound back, then I manually created a restore point individual for each update before installing. It was a frustrating and time-consuming process, but I could locate the defective updates that I've now hidden so that they will not download on my laptop.

  07/12/14 as a result of writing the earlier yesterday, all sounds had again been disabled when I started my laptop this morning. I did another system restore before installing updates security yesterday (KB2965788, KB2939576, KB2964736, KB2957189) AND my sound back. I've now updated iTunes with the latest version in the hope that this stops the residual fault caused by security updates and I will keep you informed.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• Qosmio F50-126 - Subwoofer does not work in Windows 7

  My subwoofer does not work in Windows 7.
  I installed the audio driver Dolby Digital... Basically controls the bass.

  That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?

  I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
  Can you change anything to make box works properly?

  AFAIK there is no special driver for subwoofer features.

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• Acer Aspire 5536 Webcam does not work with Windows Live Messenger

  My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger.  Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger.  Is there something I can do?

  A quick response would be much appreciated.

  Hi Tom Hawx,.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  (Article applies to deliver the LifeCam, works very well for the issue)

  If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/