Audio dropouts in streaming for magical flow device

Similar Questions

• HTTP Live Streaming for Apple IOS devices

  Hello

  We have installed FMS 4.5, including Apache 2.2 on a server of Windows 2008 R2 64-bit according to the instructions provided in the video which can be seen here:

  http://www.Adobe.com/devnet/flashmediaserver/articles/install-verify.html

  Accessing the test page for the server works fine for HTTP Dynamic Streaming and RTMP Dynamic Streaming samples.  However, when we try to use HTTP Live streaming of the samples on the test on an iPad via AnyConnect web page, we see only a blank page with a small icon of Abobe Flash in the upper left corner which is basically saying that the Flash has been detected on the page and is not supported by the iPad.

  The video above shows HLS working on an iPad with no additional installation steps.  Can you hep?

  Found the answer

  The homepage on the Adobe server has an error in the javascript.

  If (uagent.search ('iphone')! = - 1 | uagent.search ('ipad')! = - 1) {}

  should be

  If (uagent.search ('iPhone')! = - 1 | uagent.search ('iPad')! = - 1) {}

  .. .capital P

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• Audio dropouts on Satellite P100

  I have a Toshiba laptop Satellite P100 PSPADE.
  OS: Win XP Professional
  Connected equipment: MOTU 828MKII Firewire or Terratec DMX 6Fire USB.
  In both situations, audio dropouts occur, using Cubase SX3.
  I already disabled some elements in the Manager of hardware devices, such as:
  -Microsoft AC adapter
  -Control compliant ACPI Microsoft method battery
  -Network adapters
  -Bluetooth device
  -Sound controller
  - ...
  Only the devices battery generated many audio dropouts, which are now reduced by disabeling the drivers.
  Nevertheless, sporadic abandonment occur always.
  Although, Terratec, and MOTU audio devices using the maximum buffersize, increasing latency, but reducing the school drop-outs, audio drop outs occur.
  Reading a few articles, I came to the feature 'gas CPU"of the Toshiba laptops, which might be responsible for these audio dropouts.
  The articles mention that he is a non-configurable feature of Toshiba.
  Audio dropouts seem to occure synchronous with the activation of the fan.
  To contol the latency, I use "DPC latency Check" program, which generates a bar graph.
  The peaks of bar-graph each time that the fan turns on and at the same time, a stall audio is heard.
  Is there a solution to the problem of audio dropout?

  Erik

  Hello

  There were MANY discussions on this subject, especially with your machine. Many users tried different solutions such as remove things from the device manager like you did already.

  In General, editing music with a laptop are not really optimal. For example:

  I have a computer of office machine with a Pentium 4 2.8/1 GB RAM/WD Raptor/ESI Juli @ and I also work with Cubase SX3. There is NO problem with the latency (latency DPC latencies around 15-30 microsec Watch).

  I tried to make some changes on my Tecra A9 which has a Dual-Core, 2 GB of RAM, a HARD drive with 7200 RPM with XP on it, etc... and at the beginning I had many heavy withdrawals.

  But after a search of this forum and a few other sites, Ive created a small tutorial:

  1. services:

  For Windows XP: Please visit the following site: http://www.blackviper.com/WinXP/winxp.htm
  and apply the configuration of services twisted.

  For Vista: Go to this site-> http://www.blackviper.com/WinVista/Services/ and see the following:
  -Configurations of Viper black Windows Vista SP1 Service-> twisted
  -Super Tweaks

  -In addition the client must disbale the service "smart card"!

  2 disable the following devices:

  -Compatible control method battery ACPI Microsoft
  -Intel ICH8M Ultra ATA Storage Controllers (including the optical disc drive)
  -Ethernet and Wifi
  -Storage-> Microsoft iSCSI initiator controllers
  SD card controller

  3 disable the powermanagement features:

  -In 'Device Manager' option to allow the computer to turn off this
  all "USB root hubs" should be unchecked
  -Create a separate powerplan who can be named 'Maximum' and put EVERYTHING
  maximum (disable these features like 'sleep' and 'sleep')

  4. run the application 'msconfig' (internal tool of windows) and remove all the
  unneded services and applications in the startup list, which could include
  some tools Toshiba as "configfree" "flashcards" etc., but at YOUR OWN RISK!

  5. as you have more network connections, you can also disable all
  services such as "Windows Defender", "Windows Firewall", "security policies."
  etc. which contains a large number of resources!

  6. I recommend to keep all the drivers including BIOS update. You can use
  drivers of Intel on the chipset/storage controller/graphic chipset
  which most are more recent so our pilots.

  -> Below only for Vista!
  7. at least, you must disable this thing together graphic Vista as
  «Aero, "Windows Sidebar", etc., and switch to the Vista Basic theme.» The window
  Manager themes Vista is necessary and a LOT of resources that offers more
  resources for applications and results also in a latency time reduced.

  8. check the Web site of the manufacturers on the updates support for the device that is in use! (which means the sound card ;))

  It could be that useful...

  Welcome them

• Satellite L300 - Audio dropouts

  Hi all

  I'm chancing down the source of the audio dropouts that I experience on my new Satellite L300.

  When I bought it I opened for the downgrade to XP Pro. After optimization of XP and disabling and number of devices and services, I now operate virtually without a hitch. That is until the fan starts.

  Whenever the fan lights there is a glitch and there is also a series of glitches as the fan is preparing to turn it off. Anyone know of a work around for this?
  Are there drivers for the fan? Is there a problem with the fact that I am running XP and the machine has been designed for Vista? Should I go back to Vista?

  Any help woould have greatly appreciated.
  Kind regards
  Paul.

  Hi Paul,.

  It is very difficult to say what it is because I have too many Satellite L300 and Windows XP but I can't notice such a question. My L300 works really well with XP.

  In your case I try with factory settings and see what happens. If you see the same problem with Vista preinstalled, it seems to be a hardware malfunction and you need to go to an ASP and ask for help.

  I hope I could help a bit.

• Premiere Pro CS6 importing .mp4 = "the file have no audio or video streams."

  Hello

  When I import a clip in Adobe Premiere Pro CS6 MP4, I get the following message:

  "Failure to import a file.

  151_0010_01.MP4

  Error message

  The file has no audio or video streams. »

  I have the latest Quicktime, and I reinstalled Premiere Pro CS6 several times already.  If someone knows a solution for this, I'd be very happy.  Below are my system info and the clamp.  Thank you, Robert.

  Operating system

  Win 7 Ultimate 64 bit

  CLIP INFORMATION

  Full name \BPAV\CLPR\151_0009_01\151_0009_01.MP4

  Format: MPEG-4

  Operating name: XDCAM EX 35

  Format profile: Base Media / Version 2

  Codec ID: mp42

  File size: 1.76 Gio

  Duration: 7 min. 5 sec.

  Overall bit rate mode: Variable

  Overall bit rate: 35.6 Mbps

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Video

  ID                                       : 1

  Format: MPEG Video

  Operating name: XDCAM EX 35

  Format version: Version 2

  Format profile: Main@High

  The format, BVOP settings: Yes

  Format settings, matrix: Custom

  Parameters of the format, GOP: M = 3, N = 15

  Codec ID                                 : 61

  Duration: 7 min. 5 sec.

  Bit rate mode: Variable

  Bitrate: 34.0 Mbps

  Maximum bit rate: 35.0 Mbps

  Width: 1 280 pixels

  Height: 720 pixels

  View picture format: 16:9

  Frame rate mode: Constant

  Frame rate: 29.970 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 1.231

  Stream size: 1.68 Gio (96%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Primaries: BT.709

  Transfer characteristics: BT.709

  The matrix coefficients: BT.709

  Audio

  ID                                       : 2

  Format                                   : PCM

  Parameters of the format, "endianness": Big

  Format settings, sign: signed

  Codec ID: two

  Duration: 7 min. 5 sec.

  Bit rate mode: Constant

  Flow: 1 536 Kbps

  Channels: 2 channels

  Sampling: 48.0 KHz

  Color depth: 16 bit

  Stream size: 77.9 MiB (4%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  DELETE files inside "Media Cache files" and "hide media".

• Equium A210: Drivers XP for base system device, modem

  I need to find drivers for base system device?
  What is c?

  Need drivers for the modem device and bus audio high defination.
  Can someone help me?

  Hi mate,
  Just a quick question: have you already checked the drivers Toshiba and Downloadsite?
  I found all the drivers you need then please check the following site and choose / Download your drivers:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Welcome them

• Stream 14: 14 flow does not start

  The notebook in question (Stream14) belongs to my boss. It is uncertain whether windows 10 has been put on it.

  The symptoms are:

  On startup, I get the HP logo, and then he asks that the dongle (USB key). When it is added, it is said "Trying to recover", said "restore to an earlier version of windows. He then returned to the HP logo and constantly repeats the words above. I left on for more than 3 hours, thinking that it actually works, but it's just a loop.

  I even tried F11, no difference, F9 and choose the USB, no difference. I tried the USB key, and all the necessary files seem to be there.

  I even tried booting via a reader of DVD USB using a DVD of windows, but it doesn't start the reader, even if I did the DVD player, the first boot option in the BIOS setup.

  Any advice?

  Gerryd544

  The recovery partition may have been deleted.  You will need to use the recovery to use media that has been created specifically for the Stream 14 to reinstall the operating system.

  Contact warranty HP support to inquire about ordering a recovery for 14 flow flash drive.

  https://support.HP.com/us-en/contact-HP/product/HP-stream-14-z000-notebook-PC/7296828/model/7415863

• Re: Card C-media - Windows cannot load the driver for this hardware device. (Code 39)

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.

  I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have.  The long, everything went well, except for the audio part.

  Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)  Click Troubleshoot to start the troubleshooter for this device.

  I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there!   When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.

  BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD.  Thanks for any help on this, jim

  Hello

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/310123

  I also suggest you to install the drivers from the Dell site.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

• I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device

  I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device. I have a midi keyboard Casio CTK-3000 and you want everything to sound out the two speakers on the keyboard.

  You can not.

  You can exchange midi data between the keyboard and a PC via the USB port. But not strong like the keyboard is not an audio device and therefore doesn't have the proper drivers.

  MIDI is not good in itself, it's just that a series of statements sent to a electonic module that transforms these 0 and 1 for sound samples. This isn't the same principle as an audio card/device.

  See you soon,.

  Jerry

• Cannot enable the streaming media to other devices on my network?

  When I try to install Media Streaming on Win 7 Home Premium 64 - bit, using Control Panel/Network Sharing Center/Media Streaming Options, I find the following strange problem.  The "show devices on:" drop-down list has no content and does not allow me to select anything.  On my Win 7 wife's computer, this dropdown allows of me selcet is "all networks" or "local networks".  I discovered this error when I bought an XBox 360 and setup of Windows media Center on it.  Windows Media center on the XBox can connect to my PC and play all the music in my library of music through Media Center, but the XBox can't find my pc on the network using the music library or picture library.  My PC does not list the XBox when I "see the network computers or devices", but nor does my wife's PC.

  I am confused as to how my XBox has been so easily connected to my PC and continues to work perfectly in the application of the XBox, Windows Media Center, and still fails to find my PC or browse its contents through its other music/photo/media applications.

  I have no problem connecting to XBox Live or on the internet.

  Any ideas?

  Hello

  Follow the steps described in the links below: reading your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-US/windows7/Stream-your-media-to-devices-and-computers-using-Windows-Media-Player

   

  Change settings for streaming media in Windows Media Player: http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player

  Also, you can try to temporarily disable anti-virus and check if you can get the opportunity to play and play on your Play Station 3.

  Share you must have under 'Network and Internet' a 'homegroup' set in place with share pictures etc. with controlled devices. You must also have under 'Network and Media Center' 'share with media devices' network Local set to "allow all". You can easily access these via WMP12, if you look under the drop down menu "share", it's the two base units, just select those to go to the relative Panel.

  All the media you want to share must be stored in the folder 'Libraries' relative to the topic. For some reason, videos are available to select the "folders" on the PS3, if you select 'All videos' only the recorded TV shows samples sample wtv file, which

  It will be useful.

• Download audio files on Windows from an external device (recorder)

  I need step by step instructions on how to download audio files to a portable recorder (via the port USB.)  I want to download on Windows, then Windows Media Player and then place it on the desktop in a file.  Deeply, I'd appreciate any help.

  Hello

  Please provide us an opportunity to help you.

  I understand you want to move the audio files on your USB drive to your computer Windows 8 Recorder device. You can follow the steps mentioned below.

  Note: follow the steps in the step 5 mentioned below on how to move the audio files on your computer that Windows 8.

  If you want to copy the audio files from a source computer and transfer it to a recorder USB device and then download the same to another computer, please follow the steps:

  Step 1:

  Insert your device USB recorder to the USB port on the source computer. If this is the first time using the player on your computer, Windows takes a few seconds to automatically install the drivers.

  Step 2:

  Click on "Open folder to view files" in the window AutoPlay to open Windows Explorer with a view of the content of the flash player. Does identify its easy drive letter. You can also press Windows key + E and under devices and drivers for the USB device drive recorder is listed under "removable storage".

  Step 3:

  Locate the files you want to transfer in Windows Explorer. Drag and drop these files on the drive of the recorder. By default, it copies the files, so the originals are still on your hard drive.

  Step 4:

  Right click on the USB recorder and select "Eject" once the copy is complete.

  Step 5:

  Remove the recorder USB key and insert it into the USB port on the destination computer.

  Step 6:

  Open Windows Explorer again through the window of Autorun or go in the Explorer of files after the Windows key + E and the devices and drivers.

  Step 7:

  Locate the files that you have previously copied to the recorder. Just drag and drop them to any location on the hard disk of the destination computer. If you need more copies on your device to recorder USB, right click on the files and drag them to the hard disk of the destination computer. When you release the mouse button, select "Move here" this will copy the files to the hard drive and delete the copies of the recorder USB.

  Step 8:

  Click the recorder USB device drive and select "Eject" once the copy is complete. You can then remove the USB recorder.

  See also: copy or move files and folders

  http://Windows.Microsoft.com/en-us/Windows-8/copy-move-files

  Hope that the steps allows you to download audio files. Answer please if you need more help on this issue, we will be happy to help you.

• Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Original title: Audio recording sound recording microphone

  Hey, if I get this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

  There are several models of m6 ENVY

  ENVY m6 -?

  This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
  This is a link to the HP support site to download drivers

  And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems

  Looks like something to remove the registry entries for the driver

• . Ovf failure package deployment - inconsistent backup device specified for the '7' device

  Hi all

  While trying to install the virtual machine based on the deployment of the package .ovf, I came across the following problem:

  "Incompatible device Backing specified for the"7"device".

  At the beginning I had at my disposal a .ovf package created in VMware ESXI 5.1. My intention was to use it to install box virtual machine in VMware ESXI 5.5. I realized without having big problems with the installation.

  In the next step, I created another package .ovf, taking for base virtual machine already running in VMware ESXI 5.5. Then I tried to deploy built in this model of .ovf medium to clone the virtual machine in VMware ESXI 5.5.

  Unfortunately during the Import exported first of all on the same model of VMware ESXI .ovf 5.5 install almost the same machine I got the following error message:

  Incompatible device specified for the '7' device support?

  Can you please how to cope with this problem, or at least what the error message refers to? I was looking on the internet the cited 'success of 7' but wihout peripheral.

  Thanks and regards,

  ELRA

  In most cases, there could be some hardware associated with the virtual machine when you first export the ovf.  Now on the destination where you try to deploy there do not have this device and its origin of the error.

  See if you had a CD-ROM / Audio or video or any other devices were attached with the virtual machine when you first did an OVF. ?

  ~ dGeorgey

• First CC 2015 - 'no audio output channel valid for found a reading. Please check audio hardware preferences. »

  I just updated from CC 2014v2 until 2015.

  When I open any project or create a new and import any media type - I get a yellow warning at the bottom of the display window showing 'no audio output channel valid for found a reading. Please check audio hardware preferences. "When you press Play, no sound plays and the read head does not move.

  Here is my audio hardware preferences - Realtek is my only option. Everything was going well in 2014 CC this afternoon and I have CS6 installed, which opens and reads the clips and audio without problems while listing the Realtek as the output device.

  

  HP Z820 - Windows 7 64 bit - 128 GB of ram. Adobe apps and system to this day.

  I could solve this problem by removing all plug-in in the directory "C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore", which fixed the problem, then replacing them in batches until the returned error.  In this case, it was an outdated version of an addon Bluefish444.