Audio drops with BT stack 5.10.06 and stereo headset Toshiba

Similar Questions

• Drag and drop with audio for the success or failure for each object

  Captivate 7

  I saw Pooja video on at least 20 times, literally, but I can't yet find the complete instructions anywhere. Not even in things, I spent a lot of money on. Ouch.

  

  I want to drag "ed" & "and" and get a snap sound as they settle. I got it work. But when he moves the words in the wrong location, I want a sound alert, allowing them to know that it is a mistake and do not want the box to accept the term.

  Sometimes video of Pooja, but it does not show how. I'm pulling out my hair. Soon it will get ugly around here.

  Sorry for that, I always use advanced actions and sometimes forget (late in the evening) that everyone knows with them.

  If you want to only play an audio clip when an object is moved and don't need a legend to appear or are happy with a legend of single failure (you can check that a new that), you can replace the command execute measures advanced in the screenshot of the other thread in "Play Audio"... »

  

  I've used here a clip audio, available with Captivate in the Gallery\Sounds

  Lilybiri

  PS: Since the CP6 I use the word "container" instead of legend because the text can be inserted, not only in the text captions, but also in the forms (my favorite)

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• How to associate the audio file with progress bar

  Hi all

  I have a case in which I need to associate an audio file with a progress bar. What I want to do is to able to read an audio file that will say "Started process..." "Continuous on" process ends and it is and must be synchronized with the progress bar. Is it possible to do so.

  Please let me know

  Thank you

  Ankit G

  Are you referring to a LabVIEW horizontal/vertical progress bar that basically an integer U8 constantly wrote in it? Is it in a loop as it fills?

  If so, there is a full range that allows you to listen to the signals. As you write the number of your progress at the helm, you can keep control of what the number is (structure of the event or case), and when it hits special values, you play special sounds. Here's a screenshot of this palette.

  

• I put four new ink cartridges, now the photos are drops with ink, literally dripping.

  My ink was low, so I put four new cartridges in French - Photo, Cyan, Magenta, yellow.  Using HP Advanced Glossy Photo paper, and photos are drops with ink.  Please notify.

  Four new ink cartridges caused my photos to drip with ink.

• Quik drop with custum object

  Hello

  I would give to known if it is possible to use a fast drop with custom object

  Your question is not really clear, but these should hopefully an answer:

  Rapid drop uses the list of features available in the pallets, so if your function is in the palette (for example if you place it in the user.lib folder) it will be in the list.

  In 2009 of LV, QD also gets the list of the screws in the project, so if your VI is part of the project (and probably is) it will be in the list.

  You can add shortcuts to QD, so that you can use a shorter name (such as "ba" instead of "Building the table").

  You can call her select a palette VI function, allowing you to review for your VI.

• using male to 3 x female cable stereo Audio Splitter with audio output

  The HP Pavilion 22-h031ea all-in-one has an audio output on the back of the unit. Is this ok for this connect with a 6:1 with a male/3 female x audio cable with stereo Audio Splitter?

  Simmo56, welcome to the forum.

  I am not sure it will work.  However, it will not hurt anything to try it.  If this does not work, you will not be able to have 6.1 sound.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to merge a Windows Media Audio System with an MP4 video file?

  I have an educational video to which I add MP4 audio comments. I am an extreme novice.

  Also, I hope to be able to sync the audio with the video. The entire production lasts only a few minutes 4.

  Hello

  1. what operating system is installed on your system?

  You can use Windows Movie Maker that allows you to do. Or you can use any third-party application to merge the audio file with a .mp4 file.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  In addition, follow the links below and check if that helps.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker (Applicable for Windows Vista)

  http://explore.live.com/Windows-Live-Movie-Maker-video-editing-using

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker (Applicable for Windows Vista)

  http://Windows.Microsoft.com/en-us/Windows/cloud/create

  It will be useful.

• I have no sound on my computer (Windows XP). I installed audio driver with no result. What to do next?

  No sound

  I have no sound on my computer (Windows XP). I installed audio driver with no result. What to do next?

  Hi f. Mac,.

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  No sound in Windows

• How can I play flac Audio files with extension on windows media player

  How can I play flac Audio files with extension on windows media player

  Hello jesskenneth,

  Thank you for visiting the Microsoft answers Site.

  The extension Flac is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

  Thank you

   

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please help, audio problem with XW6600 and NVS 315

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP 720837-001 replacement part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is resolved, if I reinstall the NVS 290.  For both cards, I use the latest version of the nVidia Driver and driver HP.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  First of all, you want to be sure to load the latest version of the BIOS on this xw6600.  It is from the end of 2012.

  I met this problem several times... do not know if these suggestions will help, but I think that your experience may be related to previous losses audio when the latest drivers are loaded that contain "pilot high-resolution audio" in the game of video driver.

  The current Quadro NVS 315 W7 64 bit graphics drivers Quadro ODE 320.92, which work well in my xw6400, xw6600 and xw8400 workstations running several types of cards Quadro FX and NVS.  If you have used the standard installer downloaded and used the standard "recommended" install that he threw into about 5 pieces, that only one you really need (selected by default single main driver in a custom installation).  That's all I use now, throughout my nVidia installs, and I also check the clean install box on the last page before loading begins in the custom installation path that I go down.   So, to charge fees, I first uninstall anything nVidia via the control panel and then hunt around on drive C for nVidia remains in the trash.  This includes any folder with nVidia in its title, including temporarily enable Show hidden files and folders in the tab views in the Folder Options Control Panel.  I then reboot and finally make this unit "clean install" - checked - technical of custom installation.

  Try this approach first... it's easier.  You might have luck, and audio can return.

  One of the elements that was installed in the "recommended" non-custom installation was a driver of nVidia high-resolution audio.  This seems to conflict with / replace the RealTek driver who was using your audio RealTek chipset on the motherboard.  I discovered that there is a part of BIOS for those workstations which is usually hidden, but sometimes becomes visible with installing drivers high-resolution audio.  F10 in the BIOS, go to the Advanced tab, down for the terminal Options and check if rebalanced Audio appears just above monitor follow-up.  If he was not hidden by the nVidia high-resolution audio driver load then it will virtually always disable status.  Change to activate, F10 to save the change and BIOS don't forget to save changes on exit and F10 again when BIOS asks.

  We got exactly that occur as a result of installing the drivers nVidia GeForce to a GeForce GTX 650 Ti BOOST on a xw8400 and I saw that happen with these latest nVidia Quadro driver packages, too.

  This is the second best method to solve the problem, if it works.

  Another approach is to save your current BIOS settings via replicated in the BIOS Setup, load into my settings to clone xw6600 (attached) and see if the sound comes back like that.  Sometimes integrated Audio remains hidden when we F10 in the BIOS, but my clone settings was set correctly even though the option remains hidden.  You can open the attached CPQSETUP. TXT file with Notepad and Find allows you to do a search for "audio"... the second shot will be the Audio integrated, one.  Note that it is configured to allow this clone... He usually lies in a status of disable, otherwise.

  You can edit it with Notepad, except that, and charge that the version of your original settings of the BIOS using replicated Configuration changed if you want to use this technique with other types of work, such as the xw8600 workstations.  You will always find this entry via this method, even though it is hidden when you look directly into the BIOS, so it's a good thing to know.

  It is the third most easy.

  Fourth... you start dinking autour with drivers in Device Manager.

  Replicated configuration function of the BIOS with a USB, it is very easy to save your original BIOS settings, try another set of settings and return to your original if you wish.  The clone CPQSETUP. TXT file can be edited by hand (with caution) to convert a Disable to activate, for example, saved and then downloaded into your BIOS firmware.  If you want to try attached BIOS xw6600 clone settings make sure to change off the coast of the "xw66002" so that only CPQSETUP. TXT is on your USB... Replicated configuration works which with a file named exactly that.

  I posted here a few days on exactly the configuration of the workstation this clone has been optimized dethrone archive on it.

  Finally, please post back with your findings because it has become a more common problem, and the more data we have here: it is likely, we will find the fastest solution boilerplate.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• Audio problem with HP DV7 Notebook

  Hello:

  I have a laptop HP PC 4 year under Windows 7 Home Premium 4 GB of Ram, 64 bit OS.

  I'm not a technology person, so please bear with me...   I had a LOT of problems with programs like Word or Excel (and now also my IE) which gives me a message 'No response' and almost closed on several occasions.  I cleaned up completely my computer about three months ago in the restaurant of a set of restore disks which was prepared, when I bought the laptop, and Best Buy assured me that this would restore my computer as long as "new factory".  However, this condition lasted a few weeks.

  In any case: last week, I took the advice of a consultant Microsoft Community and cleaned my computer using Malwarebytes and then sought an updated on the site of HP driver and installed, and my computer behaves a little better, but I lost my audio cmpletely.  I tried to solve it, and the message says that my audio is "not connected"...

  Any suggestions?  Would be glad of some easy to follow advice.

  Thank you.

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system and then restart the laptop - this process may take several hours before the task in Windows.

  When this is finished and reloaded Windows, download the installer of IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50595.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• 4 wave Max Audio went with a clean install of windows 8.

  Hi, I recently put Inspiron 14 3421, it came with Windows 8 and Wave Max Audio 4 per-installed software. The product I have had question so I handed the centre of authorized Dell service here, so for service purpose DASC uninstalled guy OS and re-installed but after re-installation, I couldn't find Wave Audio Max 4 software. Could you let me know how to reinstall the software Max Audio 4?

  Hi sadanand.pathak,

  Waves MaxxAudio 4 part of the audio drivers.  I suggest you to download and install the Audio drivers. Click on the http://dell.to/15DgOwU link-> choose the operating system-> expand Audio to download and install the drivers. In addition, extend your Application and install The Application Dell Quickset.