Audio HP pavilion dv2610ca fails to install xp 32 bit

Similar Questions

• Pavilion 15-P153NM: cannot install Win 64 bit 8 or 8.1 on Pavilion 15-P153NM

  Hello.

  I bought the Pavilion 15-P153NM with FreeDos. BIOS version is f13.

  I have an installation DVD of Win 8 with release 8.1 on it.

  I get this message: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows can only be installed on GPT disks.

  Edit: I tried this solution http://support.hp.com/za-en/document/c03445889 and I can't quite find way Sources of EFI boot or storage.

  Edit: I do this? https://www.YouTube.com/watch?v=pb6tECZP6WE

  Guess which will remove stuff installed HP, such as HP documents or whatever.

  Waiting for advice. Thank you.

  You can convert MBR TPG, to achieve this goal, you can use the disc management.but with this tool, you can convert olny to empty disk GPT om, if the data on the disk, you must delete all the prior to conversion. to avoid data Delete, you can try third-party software AOMEI Wizard Partition MBR TPG to convert without data loss

• HP Pavilion m7667c, try to install Vista 32 bit. No OS - the charge not assigned drive letter.

  My HP Pavilion PC m7667c console was at the origin of many blue screens. After several diags that does not solve the problem, I replaced the power supply because the block is dead.  Then replaced the motherboard.  The XP PC operating system will not recover because the BONE had already improved Multimedia Pro XP to VISTA. I can get the VISTA OS to run from my CD to upgrade to VISTA, but the operating system is not found, because there is no drive letter assigned to the drive.  I tried a replacement for the HD signal cable but no help.  I can't on a screen so windows help.  At this point, I'm ready to reformat the hard drive then maybe I could partition and assign a drive.  Any suggestions?

  Hello

  How many drives are installed on your PC?  RAID mode running on your PC?

  Boot into the bios and look under the Advanced menu.  What is the setting for the SATA mode?

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• All-in-one Pavilion 23 23-b034: 2 try to install the solution Center HP for printer HP Pavilion has failed. Screenshots

  I had to do a cover of the factory recently. I can print with the HP C7280 programs smoothly. I got this printer and the solution Center works on this pc before the resumption of the plant and another pc before that.  I tried to install my printer HP all One Printer Solution Center now twice with today fails. I hope that the help of screenshots.

  I 1) downloaded a complete new installation - 2) off all antivirus - 3) restarted and restarted the printer HP - 4) the fact that all windows updates have been applied for windows 8.1 - 5) tried after the provided HP solutions but always with failure. Installation all the way to the final "device configuration"... and then expires. Thanks for any help.

  

  

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  RnrMusicMan: (btw, former musician of Navy for this purpose) I need to send thanks a lot for your answer. I have tried, almost to the point of questioning my sanity, too many times tried too many things and all have failed. Why not go and buy a new printer? Financial considerations. Here's what I've worked with... (finally a good result there, at least the best I know for the moment at the end)

  (1) start here, I have an older HP all C720 printer wireless. I do not think at the moment there is a download of the full version which will allow him to install it in a machine of 8.1. An 8 machine if necessary, but not a 8.1 I do not...? That's what I gathered. Where I made my mistake, so, I was this old horse to battle C7280 installed on my newer HP Pavilion and worked very well with 8.1, (read on before thinking 8.1 work with the C7280) when I say great worked, I mean the Solution Center has worked. Then after a while I improved the Pavilion to 8.1 and everything was fine. A couple of weeks, I had to do a cover of the plant on the HP Pavilion. Instead of installing the software of the printer with the center of solutions right then while he was still an OS 8, I upgraded to 8.1 Loaded my favorite of all the programs and tweaks and tricks. Then I said, I'll install the old workhorse C7280. It would not, not at all, regardless of how many tips I read here, and Googling. Then I tried to install the full version of XP on one of the XP machines. No go. Something I said is prevention. Who could know. I tried to purge the XP what I knew could be related to HP. Shut off all antivirus programs, download fees, etc. etc. ad naseum. I have read and read and tried and failed and failed. You get the drama.

  So, I decided that if I could get it on the Acer Aspire one Netbook I could use as a slave, small sorta Acer server. I barely use the netbook anyway. So I couldn't do. Frustration. So I decided JUST ONE MORE ATTEMPT. And here's what I did for Acer.

  I did a factory restore. No former antivirus autour. Nothing is added. Presitine and already had Service Pack 3 with the resumption of the plant.  What follows I have none to little idea of his touch, but that's what I did.

  (2) I have an old modem that I had used as a slave of my new modem D-Link. I got it, because many of my devices will not work on the new 'n'.  I think, old modem old printer, old BONES. I have set the printer to get the old o SSID of the slave and agreed which has no password. Fortunately, I know anyone personally that could use this wireless slave and they all have their own.

  (3) so once again, I downloaded the full version of XP on the netbook. Extracted, he ran, and so he went the full installation and works.

  That's a lot, but I'm a cheap guy who hates to throw even if old devices, good. I use this Chrome extension called Extension Office remotely in order to get on the netbook from any computer and print using the Solution Center.

  I don't know what I did but I know I've worked. So this is my solution. I'm sure some could find another work around, but probably way above my paygrade.

  Once again, thanks a lot for taking the time. I think I followed your solution several, much too long and did not work. Unless I was always doing something wrong.  My solution was radical but it works for me always try to use these appliances. I just take good care of them and they last. My most recent is the HP Pavilion and it's going on 2 years now.

  Differences or questions please ask. 'Jack :-{D '.

• Almost all drivers fail to install - Pavilion hp Pavilion 15-p018sv

  Hello, this is my first post in the forums of HP so I apologize if this is posted in the wrong section.

  I bought a laptop HP 4 days ago, hp pavilion 15-p018sv, but it came with windows 8.

  I'm more of a guy of Windows 7, so I just completely removed Windows 8 and installed Windows 7.

  The problem I have is that almost all drivers fail to install with an error message such as:

  "the computer does not meet the minimum requirements for installing the software.

  The strange thing is that I download the drivers through the official HP - Pavilion 15-p018sv Page for Windows x 64 drivers, but they won't install it always.

  Any ideas what's happening? I'm so disappointed...

  You are the very welcome.

  Here are the drivers you need...

  Wireless:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133353_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Bluetooth:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132205_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Dev PCI:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_134503_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Unknown dev:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132986_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135497-1&cc=us&DLC=en&LC=en&OS=4063&product=7176909&sw_lang=

• KB963671 update continually fails to install with error 80070652

  I have a HP Pavilion dv6000 laptop under Microsoft Vista Home Premium (32 bit).  My Windows Update is configured to be installed automatically, but there is an article that fails to install every day.  The update by using the Microsoft Script Editor (KB963671) fails to install with error 80070652 code.  I read this error code indicates failure prerequisite installation/update, but I don't remember that ever happening.  When I run Office Diagnostics, everything comes out very well.  I searched the Microsoft discussion groups and communities, but have not been able to discover a solution.  Any help or insight would be greatly appreciated.  Thanking you in advance for your help.

  -Vince

  Hi U07348,

  Have you tried to install the update as a stand alone.
  Here is the link to download the update by itself.
  http://support.Microsoft.com/kb/963671
  If it does not install to proceed with the following steps.
  Step 1
  Download and install Windows Installer 4.5
  http://support.Microsoft.com/kb/942288
  Step 2
  Download and Install CleanUp Utility
  http://support.Microsoft.com/kb/290301
  Let us know if you need help with this problem.
  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 12.5.1 iTunes fails to install (new)

  My Toshiba Portege running Win7 fails to install iTunes 12.5.1.  It's the same problem, I met years ago with 6464 installers, but found the installer for old video cards work perfectly.  Apparently someone at Apple decided to not (yet) offer Setup for older video cards for 12.5.1.  I spent 6 hours so far today tried a multitude of settings with installer 6464.  In the meantime I have remove all the Apple software in the prescribed sequence and restart.  I've got rights admin - so what happens?  I'm headed to 12.4.3 now so I can communicate with my new iPhone SE.

  Okay - I found my own solution, but he was buried in the documents to help around to install iTunes on Windows. Apparently I can't find the version of iTunes for older video cards directly by Apple, but there was a link in the help to the 12.5.1 document version.  With the download of the iTunes64Setup (not the 6464), I was able to successfully install 12.5.1! Now, I can't wait for the next update see how much fun it will be to locate the 64 version...

• VPP OSx Apps install fail to install

  Devices are install Apps via VPP on iPads work very well, but pushing to OS X.

  IM struggling to find much in the newspapers.

  What newspapers would show the reason for the failure and someone else has this problem?

  Server of El Cap 10.11.5 5.1.5

  10.10.5 Yosemite customers.

  Thank you

  connects here showing the failure - of ideas?

  The customer needs something special to do for her? He trusts that the profile and fair registration profiles as iPads (which works fine) but the apps fail to install on the Mac client.

  [66066] < \033[0;32m10.114.136.9\033[0m > mdm_connect.php: incoming_request = {}

  "CommandUUID' = > '6A3E6ECC-E95A-4133-85 C 3-76CF780058E3."

  'ErrorChain' = > ' [{}

  'Code error' = > 71

  'ErrorDomain' = > 'MDMClientError ',.

  'LocalizedDescription' = > ' order received for: < device > but limited to: < user: 0 > < MDMClientError:71 > '

  } ]',

  "RequestType' = > 'InstallApplication."

  "Status' = > 'error."

  'UDID' = > '92c2840ef0b95f68be2bc3f5322d4931 '.

  }

  3: [66066] < \033[0;32m10.114.136.9\033[0m > {PerformInTransaction (mdm_connect.php:125)} PerformInTransaction: connID = P:66066, txnID = _connect_transaction_1)}

  2: [66066] [07/07/2016 13:48:52.840] < \033[0;32m10.114.136.9\033[0m > {Target_for_client_certificate (target.php:418)} Target_for_client_certificate: checkin_token = "82614ee4-1f6d - 47 7-a91f-64f0e6005eb1")}

  1: [66066] [07/07/2016 13:48:52.847] < \033[0;32m10.114.136.9\033[0m > {Target_for_incoming_request (mdm_connect.php:20)} found target Mac: "test-im" [12521] (SN: W81170ZJDAS, CN:82614ee4 - 1f6d-47 7-a91f-64f0e6005eb1) >)}

  For the request:

  {

  "CommandUUID' = > '6A3E6ECC-E95A-4133-85 C 3-76CF780058E3."

  'ErrorChain' = > ' [{}

  'Code error' = > 71

  'ErrorDomain' = > 'MDMClientError ',.

  'LocalizedDescription' = > ' order received for: < device > but limited to: < user: 0 > < MDMClientError:71 > '

  } ]',

  "RequestType' = > 'InstallApplication."

  "Status' = > 'error."

  'UDID' = > '92c2840ef0b95f68be2bc3f5322d4931 '.

  }

  0: [66066] [07/07/2016 13:48:52.847] < \033[0;32m10.114.136.9\033[0m > {_connect_transaction_1 (db.php:410)} Status = "Error" CommandUUID = 6A3E6ECC-E95A-4133-85 C 3-76CF780058E3

  0: [66066] [07/07/2016 13:48:52.847] < \033[0;32m10.114.136.9\033[0m > {Task_handle_error (mdm_connect.php:92)} \033[0;35mErrorChain: [{})}

  'Code error' = > 71

  'ErrorDomain' = > 'MDMClientError ',.

  'LocalizedDescription' = > ' order received for: < device > but limited to: < user: 0 > < MDMClientError:71 > '

  }] \033[0m

  2: [66066] [07/07/2016 13:48:52.880] < \033[0;32m10.114.136.9\033[0m > {Task_handle_error (mdm_connect.php,:92)} incoming_request = {}

  "CommandUUID' = > '6A3E6ECC-E95A-4133-85 C 3-76CF780058E3."

  'ErrorChain' = > ' [{}

  'Code error' = > 71

  'ErrorDomain' = > 'MDMClientError ',.

  'LocalizedDescription' = > ' order received for: < device > but limited to: < user: 0 > < MDMClientError:71 > '

  } ]',

  "RequestType' = > 'InstallApplication."

  "Status' = > 'error."

  'UDID' = > '92c2840ef0b95f68be2bc3f5322d4931 '.

  }, task = {}

  'id' = > 422905,

  'library_item_task_id' = > 70285,

  'library_item_tombstone_id' = > ",

  'internal_task_id' = > ",

  "task_type' = > 'InstallApplication."

  'args' = > 458,

  'params' = > ' [{}

  'Code error' = > 71

  'ErrorDomain' = > 'MDMClientError ',.

  'LocalizedDescription' = > ' order received for: < device > but limited to: < user: 0 > < MDMClientError:71 > '

  } ]',

  'updated_at' = > ' 2016-07-07 12:48:52.766565',.

  'completed_at' = > ",

  'successful' = > 0,

  'mdm_target_id' = > 12521,

  'asset_id' = > ",

  'push_arg_tombstone_id' = > ",

  'jump' = > ",

  "uuid' = > 'ch. 3-76cf780058e3 6a3e6ecc-e95a-4133-85."

  'library_item_id' = > ",

  'updated_at_xid' = > 3590236,

  "_table" = > "mdm_tasks"

  '_schema' = > ' < array: 14 entries > '

  }

• Auto. updates fail to install. but Firefox tells me I have the latest version.

  Updates fail to install. When the order of Firefox, said I have the latest version and am unable to download the updated version.

  Hello
  The details of your system it seems that you are running the latest version of Firefox.

  Although you can visit here and make sure that it.

• HP USB and wireless Lan update failed to install

  my USB hard drive can not be found and I noticed the Intel USB 3.0 extensible host controller FAILED to install the software update and also the Ralink Wireless network driver update / LAN also failed to install, I tried other USB hard disks, and they can also be seen, whats the fix for this please Thank you

  Well, it's different, I went to the control panel and found find and solve problems and clicked on it and went to the configuration of a device and ran the troubleshooting and it says problem found hardweree changes could not be detected...? which is weird, but Defected said... and it seems to work fine now, I listened to 2 and 1/2 hours of music and watcthed 2 complete movies and it seems to work fine now so there was me but still pretty strange thing that can happen thank you for your help and all who responded ) soon )

• I want to know how to remove the back cover of my HP Pavilion Sleekbook 15 to install the new memory?

  I want to know how to remove the back cover of my HP product name: HP Pavilion Sleekbook 15 to install the new memory?  All site shows HP Web is how remove caches memory.  Unfortunately, with the newer models like mine, the whole back cover needs to be removed.  I have tried in vain to remove it, but so far all that I managed to do is scratch my cover.  If anyone can help?

  Dear David

  It's a very good idea, it would also be a good excuse to use my new phone for this.  So I'll say thanks again for the good advice.  Have a great weekend you Mr.  As I said earlier, you're a star...

  Yours Sincerely

  Alan

• HP PAVILION 15-00B002TU: cannot install Windows 7.0 64 bit on Hp Pavilion i3 model 15-00B002tu

  Hello

  It has to do with my Hp Pavilion model I3 i5-00B002tu, which came with pre-installed 8.0 Win, the problem is that Iam trying to 7.0 64 bit Windows support USB, but at the end of the installtion it gives me the error 'installing Windows could not configure windows to run on this computer hardware', I tried to load drivers of "'https://downloadcenter.intel.com/download/22194 ' but the problem persists" I need to install win 64 bit 7.0

  Please help me to install

  Thank you

  Hello:

  The Intel link you posted does not work, so I don't know what you've tried.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Dist. Kit fails to install, a newer version already exists of reports

  I'm with CVI 8.5.1 on Windows XP sp 2.  distribution kit fails to install executable for a project, sites that have a newer version already exists.  However, previous versions did exist on either the c: drive or that they appear in the Control Panel Add / Remove programs.  Any ideas?

  Rick

  The installation program is to find indications that the release 1.0.14 of your software already exists on the system. If this is not true, then he could have some problems when uninstalling this version. If you search your registry database for the product code {7D8D2E0B-CEB1-44D0-A081-1B0C039F9157}, I'm sure you'll get some hits. If the software cannot be uninstalled from Add/Remove programs as you say, then I recommend to use the enclosed MSIBlast utility to remove the order of it. Unzip and run the program, and then check the box "Display all installers" at the top. Find your software (by name, but check the product code) in the list, and then uninstall it. Be very careful when you use this utility that you uninstall the right thing. You don't want to accidentally delete something important.

  A. Mert

  National Instruments

• Multisim update fails to install with error.

  The regular update fails to install with error: an error occurred in the installation of an update.  If this error persists contact technical support OR.  It comes to Multisim.

  How can this be repaired?

  Thank you

  Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370

  It will help you get a better answer...

  Best regards

  H S