Audio input and output stop working after upgrade 10.2

Similar Questions

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• SD card slot stop working after upgrade a1 - 830 kitkat

  Hello

  After update of the a1-830 (Spain), SD card stopped working. As I said in another thread, it may be a coincidence if, in addition, there is no other reason why (no water, no drops, no high temperatures...).

  Checked the sd card in other devices - works OK

  checked other maps sd in the 830 - nothing has worked

  reset to factory settings - nothing, no error messages...

  My question is, is there some newspapers, dump, something where I can search for messages in error, to find if the problem is actually related to the upgrade?

  Thanks in advance

  Yes, I tried but nothing happened... until apply the latest patch, then the SD card is recognized, assembled and disassembled every second and valid ramdomly saying that the card does not have a file system.

  I'll try an another factory reset and if after that always have the same problem, will finally I bought at the store.

  I'm going to mark it as resolved, I think that this has nothing to do with the update of kitkat

  Thank you all for your answers

  Now, waiting for news about an update of the lollipop...

• Logitech Headset H330 with Mic stopped working after upgrade to SP3 of XP Professional

  While in SP2, all worked, but once the system to update to SP3, the game has stopped working.

  Any help would be appreciated.

  I had the same problem after buying the Logitech H330 Mic headset and use Windows XP with SP3.

  -Solution (at least for me):

  * Go to C:\WINDOWS\inf

  To find the WDMA_USB file. BAK

  * Rename this file WDMA_USB.inf

  * Use the Windows Update Wizard (from Device Manager', select the 'Logitech USB Headset"(with yellow exclamation mark), right click and select 'Update driver...) »)

  * Specify C:\WINDOWS\inf as a location to search for the driver

  * If you are lucky (I was / am!), Windows XP with SP3 will install the "Logitech USB Headset" as USB-audiodevice and you can select (and - finally - use) as audiodevice!

  -Credits and thanks to 'Anonymous' on http://www.mycreativefansite.com/2007/06/solution-cannot-install-this-hardware.html on May 31, 2010 17:36

• Lightroom 6 stopped working after upgrading windows 10

  Hello

  My LR6 will not launch after the Windows 10 major update last week.

  I get this Windows dialog, superimposed on the LR start page;

  Adobe Photoshop Lightroom has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I have no option at this stage, except Lightroom closure.
  

  I rebooted several times (it seemed the same problem three times after the previous updates of small windows) and also reinstalled Lightroom twice, to no effect. When I start a reinstallation I am informed that there may be a problem because the installer has detected that a reboot may be waiting. If I stop and restart I get the same message again when you try the reinstall.

  Has anyone else had similar problems?

  Thank you

  Hi alanw,.

  Please see this thread CC Lightroom freezes when develop mode and manually disable the use of the GPU in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• Phone stopped working after upgrading to iOS 9.2

  I have updated to iOS 9.2 and my phone (5 s) has stopped working.

  do not send text messages or save and none of the applications to work.

  I do not have a PC at the moment so I can't use iTunes

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Boot Camp has stopped working after upgrade to Yosemite

  Hi all

  I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not.

  Issues related to the:

  1. can I get it back? See some of the data below.

  2. otherwise, I can create a new training camp after the recovery of wasted space?

  3 is it better to first upgrade to El Capitan?

  Thank you in advance!

  ➜ ~ diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 950,5 disk0s2

  3: disk0s3 Apple_Boot Recovery HD 784.2 MB

  4: Microsoft database 32.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS BrontoSSD * GB 950,1 disk1

  Logical volume on disk0s2

  90BC997C-0C7C-40FB-896D-973BC192A123

  Unencrypted

  ➜ ~ list cs diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 46320040-2E97-49D9-A652-87CBA72E637D

  =========================================================

  Name: BrontoSSD

  Status: online

  Dimensions: 950509715456 B (950,5 GB)

  Free space: 18956288 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 950509715456 B (950,5 GB)

  |

  + -> 14BD334A-53BE-4C89-949D-2E8E5EF30A59 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 90BC997C-0C7C-40FB-896D-973BC192A123

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 950138437632 B (950,1 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: BrontoSSD

  Volume name: BrontoSSD

  Content indicator: Apple_HFS

  ➜ ~ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1856464288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1856873928 1531680 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1858405608 32621336

  1891026944 62496768 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-1856464288]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1856873928-1531680]

  * 4:87 1023 254 63 - 1023 254 63 [1891026944-62496768] VS NTFS

  You must run Testdisk. Have what you tried so far?

• Subwoofer stops working after upgrade to windows 7. __

  After the upgrade to Windows 7 my subwoofer is no longer in effect. I tried to uninstall the driver and the re - install the latest drivers, but it does not work. Strange thing, it is that the sub will work in test phase of the program, but not in music playback. Any help would be appreciated.

  Finally figured it for people with Realtech HD audio drivers! All you do is, right-click on the volume in the taskbar.  Click playback devices. Click the speakers properties. Access improvements. Activate bass management. That's all! Alternatively click on correction of the room and set the PB to have more control.

• Speakers Logitech Z313 stopped working after upgrading to Windows 7

  I delayed upgrading to Windows 7 until after I graduated from College just for this reason. I just installed Windows 7 and my Logitech Z313 speakers that worked perfectly well in Windows XP are not recognized as material.

  There is no yellow! device drivers, I have the "High Def Audio" largest later device driver installed. Troubleshooting Windows does not detect a problem with anything. My speakers are working properly. When I disconnect or shut down the PC, I can hear the feedback and the pop Logitech has no drivers for these speakers because they must be detected automatically by the system when they are connected. I tried unplugging / plugging in different ways.

  Can anyone help?

  Thank you.

  Hello

  I quite had the same problem and found the solution: you must uninstall your device, then go to control-online Device Manager Panel => are looking for the "!" symbol on your list, then right click on 'properties' and 'details', you will see a list with weird names (ex: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_18497662)

  Copy it and go to , paste it into the search bar, and then select your 'Windows' (for me it was 10 Win 64-bit), download the driver and install it. Fact! :-)

  Problem solved ^^ not by Microsoft or Logitech, unable to understand this problem, caused by the update of Windows 10... (-_-(

• System Restore is missing from the start menu and does not work after upgrade from win98se to winXP Pro.

  I just upgraded to winXP Pro win98se. After doing so I discovered there are no ads for tabs "System Restore, disk cleanup, Disk defrag, scheduled tasks or System Info ' not listed in the"System Tools"menu, but the others are. I also noticed he wasn't an App icon. "Security system" in the control panel. I installed SP2 to try for a fix, but later he installed only the "security system" App.  I find 'rstrui.exe' in the C:\WINDOWS\SYSTEM32\Restore folder, but when I click it, nothing happens.
  I'm working on a laptop Dell Latitude cpi with a Pentium II 363 and 128 MB of Ram.

  The reason for all the downtime is you have 2 OS installed (partially), & windows

  XP is you expected in the Committee to xp & remove the possibility of return to 98... its been a long time

  but, open Disk Cleanup utility, remove the previous operating system (select all), once through, open the disc

  cleaning, locate the 'other options' button, select this option to remove all but the last restore point, close. Go

  to run, type: appwiz.cpl locate the large fo; der with the old operating system, remove it, close when thru.

  Run Disk Cleanup.

• Why siri stop working after upgrading to ios 9?

  Why siri doesn't work anymore?

  Updates can bring on all sorts of unforeseen anomalies. First of all, I recommend going through the instructions in this article that I placed down below.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • When you use Siri to dictate, dictated is limited to 30 seconds.

  If Siri is not available, or do not understand or answer questions

  Before you try the following steps, make sure that your camera works with Siri. After each step, see if Siri works.

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. If you use an iOS device, try to use Siri with headphones. If Siri works if you are using a headset, get help with microphones on your device.
  6. Contact Apple support.

  If Siri does not make a noise when you press and hold the Home button

  On your iPad or iPod touch, Siri sounds when it's time to ask a question. If you have an iPhone with iOS 9 or later, Siri begins to vibrate in place. You will hear only the ringtone on your iPhone with iOS 9 or later, when you use headphones.

  Siri also sounds when you use "Hey Siri" on an iOS device 9.

  -- -- --

  If Siri doesn't always, use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support settings.

  Backup your iPhone If you have not already done so.

  The backup of your iPhone, iPad and iPod touch - Apple Support

• Printer: My Scanner stopped working after upgrade Windows 10

  Hey,.

  Finally, I upgraded my Windows 7 to 10 Windows computer and the scanner no longer works. It prints fine, but when I go to open the scanner software, it just opens and says "add a printer". Any help is greatly appreciated.

  Bill

  Well first of all, did finish just upgrade? If so, you must make sure, that you have all the updates of Windows 10 - just search for "update and recovery", and then click Windows update. Make sure that everything is up to date. You should also completely shut down the computer and restart it at least once before you start troubleshooting.

  If you have done these things, and you get the screen asking to add a printer, then the link between 10 Windows and HP full feature software (Printer Wizard) is broken. The best way to recover is to uninstall the software from programs and features and then reinstall it. Go to http://123.hp.com/us/en and look for your model of printer, download the latest version of the free full version software.

  If you need more information, see this HP support document: http://support.hp.com/us-en/document/c05212298.

  Good luck!