Audio only on a video clip
Hello gang,
Hope someone can answer this question. A series of video clips I took more than a week. After I started putting them together, I somehow 'lost' video.
They appear as a video clip in the menu screen, but when I play them it is only the audio portion that appears.
Then after that I let him play the clip 'loses' video photo associated with the item and displays the note "audio". so I guess its now a
audio clip and I lost my video? Any ideas of the smart crowd? I'm certainly not in this group. very novice! \
Thank you
coach
I was able to set up video clips, edit them (using PE7) and save them as a project. A few days later, I went to see and they appeared as audio only.
Coach,
These two lines make me wonder a bit. I wonder if you are looking at and try to play the appropriate files. Let me give a little background, just so that we're both on the same page. First a few questions: when you have transferred the files to the SD card, what format they appear like? Where you copied them? Would you download and install G-Spot. Run one of these files that you copied to the SD card, and see what this program shows, expecially high to the right of the screen, where the CODEC used is displayed. There will be both the 'name' of the CODEC and the complete specifications of it. This info may contain a response for us. Then look at the bottom left of the screen G-Spot. You will see two columns of squares, with the number 1 in them. One is for video and one for Audio. Press the #1 for video and you * should * get a box below, with #2 inside. Hit and you * should * get a box with a #3 in there. Yet once, hit #3, and you'll get a tiny Viewer at the top left of the screen. Your video * should * play. You may also make the Audio too.
Now for the info: PE, when you save, you don't save a project file with the. Extension PREL. It's only a database, without media inside, only the links to the media. There are also some consistent Audio files that appear in the folder structure of project of the MOU, which will have the same file name, as your media files, but the. WAV extension. These are only the Audio files. There will be a lot smaller files there, with. PEK extensions. This is the display of waveform.
PE is a non-destructive Editor, because it does not change the original media files. They * must * be intact, as you copied to the SD card. It would be easy to play accidentally, say standardized Audio files (remember, the same file name, but with the.) Extension WAV*). You * should * be able to play your original (actually copies you made of the SD card) without problem. If they play only Audio, and that you have opened the right files, then you probably don't have the right CODEC on your computer. That's what the paragraph two is all about. and we will have the answer.
Let us know what G-Spot and good luck,
Hunt
* If you have your operating system files Options to not display file extensions, please change this setting. You definitely want to see the file extensions, especially as many of your files have the same file name, with NLE work.
Tags: Premiere
Similar Questions
-
I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?
If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.
Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.
Jon
-
Audio separate from a video clip to use separately
(Via a small list of things I like to do in iMovie HD...) The best I get is that it is not possible within the FCE, you have to do it somewhere else (for example, MPEG Streamclip).
Y/N?
TIA
1. Select (highlight) the clip on the Timeline.
2. press on control L (lowercase L) to unlock the audio from the video.
3 remove the video if it is not needed and use the audio where you want.
-or-
Open the clip in QuickTime Player Pro and export an AIF (audio only).
-DH
-
Loss of audio when you import video clips into PrE12 of Nikon D7100
When you import video clips into pre 12 from organizing the audio becomes uneven (guard droping in and out).
Clips will play finme in Movie Maker and his plays ok if played within the Organizer, so I know they are. He PC is using windows 7.
Taken the Nikon D7100 1920 x 1080 30 p (29.97 real rate). Film are displayed as. MOV and Document Type video/quicktime playback of other threads and works wonder if the question relates to the project settings.
Digital SLR Edit Mode project settings; Time Base 29.97 pictures / s; Image size 1920 x 1080; Pixel Aspect square; Calendar-view Format 30 fps drops; Audio sample rate 48000.
Can someone tell me what settings should I use for a Nikon D7100.
Thank you
Popeye
What are you - right click the icon on the desktop for Premiere Elements, and then select run as administrator? If so, please return to post 3 where I wrote
You definitely need a user with the privileges of the administrator account. QuickTime as well as Premiere Elements require that. Sometimes a run as administrator (right-click the icon of the program Office) and selecting run as administrator can help. Please check it out. The permissions are important.
RTA
-
First do not insert audio track when inserting video clip
I just got the 2015 CC (updating FCPX) first of the trial about 10 days ago and so far I love it. I ran into this problem when I insert a video in an audio clip with her is not in the sequence. I made sure that the video contained audio and he did. I even re-inserted a clip I had previously entered with the audio, and this same clip was not inserted with audio.
Here's a video for a better explanation of my problem: first question? -YouTube
Any help will be great!
Thank you.
You forgot to patch source audio track.
-
Clips are transferred to the timeline without the video, audio only. Add video and audio together are only possible if you first close all sequences and throw the clip on the timeline vacuum . The CC14 wasn't like that. What is the problem and how to fix it?
Is your Source patch and targeting of the track set correctly?
MtD
-
Try to record audio only from a small video clip of a digital camera.
Try to record audio only from a small video clip of a digital camera.
How to do it on Vista?
Hi robt1962,
Thank you for using answers Forum.
You may be able to use Windows MovieMaker to extract audio from your video file, depending on the format.
If you use your favorite search engine and look for "extract the audio from video using windows moviemaker" for more details.
I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Why is my video clip considered as audio only?
I have a video clip recorded in camstudio using camstudio lossless codec version 1.5. When I import into first pro, only the audio track is there. I guess that's because the Prime Minister does not know how to decode the video. How will I be able to cope with the video? and how do I add the correct codec (I have the dll)?
TjPjMusic wrote:
No there is no way to add new codecs to the Prime Minister?
If you use the software codec is already on your machine, but the first does not recognize.
If I'm not mistaken you can assign capture/export Lagarith codec in Camstudio.
First has no problem with Lagarith.
If you want to continue to use the file, you just made so you must first convert them.
-
Get only audio in Windows Media Player 11, when opening an AVI video clip
Someone sent me a video clip titled AVI. When I try to open it with Windows Media Player all I get is audio. I also tried to try to open it with Quicktime and nothing happened. Any ideas?
The following free utility to identify the codec you
to read the file.Download GSpot
http://www.free-codecs.com/download/GSpot.htm
(left-click the text: "Download GSpot")
(on the next screen...
left click: 'Download [GSpot 2.70]')You don't have to install it... just unzip the file and
GSpot.exe left click to launch.GSpot Codec identifier
http://www.headbands.com/GSpot/download.htmlGSpot Super quick start
http://www.headbands.com/GSpot/v26x/Quick_Start.htmlOr you can download and install the freeware VLC
Media Player that will play anything.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7) -
Audio only will import when you import a video clip
When I import a video clip (any format) audio is imported. However, the forecast of nail is still viable in the project window and I can even scrub through the video in the project window. I was able to import correctly the other day and I don't think I changed anything. I also tried some old clips I imported on other projects and I still have the same question.
-
Windows Movie Maker plays audio only, from video files downloaded
(I see other, similar types of questions about my problem, but none that fits 'exactly'. So here we are...) Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer. Files saved as .mpg files.
When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).
I used the 'compatibility', put options different filters turned off. but this does not work either.
What should I do to solve my problem (and subsequently, to play these videos)?
(I see other, similar types of questions about my problem, but none that fits 'exactly'. So here we are...) Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer. Files saved as .mpg files.
When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).
I used the 'compatibility', put options different filters turned off. but this does not work either.
What should I do to solve my problem (and subsequently, to play these videos)?
=====================================
Movie Maker has problems of compatibility with .mpg
conversion of files... files in .wmv format .mpg
before you import into Movie Maker may be your solution.The following freeware can convert:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)First... after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your clips .mpg video on the
main screen...Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
More info... This article treats your
question of ' audio only ':Movie Maker 2 - Import MPEG files
http://www.Papajohn.org/mm2-importing-video-MPEG2.htmlVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Movie Maker import my. MPG video with Audio only
My OS: Vista Business 32-bit
My Movie Maker: Version 6.0I have a video file of 4.4 GB of a recent trip. It's on my Motion LE1700 Tablet PC to the .mpg format. If I click on the file, the video and audio both appear.
My problem: when I import into Movie Maker (by clicking on 'Videos' under 'Import' to the left of the screen) if I can edit and publish later, the properties end up the show as an audio file under 'source '. It only allows me to drop - drag the file into the audio part of the timeline, and I can't see the video when I play (I can hear the audio).
What I am doing wrong?
Thanks for any help.
Movie Maker has problems of compatibility with the MPEG files...
It may be interesting to try to convert the MPEG for the WMV file
format before you import into Movie Maker.There are many programs that can do conversions...
The following freeware is an example...:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup260.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)First, you will need to decompress the file or just open the
Drag FFSetup260.exe out of the folder
and drop it on your desktop. To install left click.Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Good luck...
-
I was OK by dragging separate images to the timeline in Movie Maker. Now, I am trying to add video clips (AV1). When I drag them down only the Audio for the clip is recording during playback. How can I fix to make sure the video track also records? Thank you.
I was OK by dragging separate images to the timeline in Movie Maker. Now, I am trying to add video clips (AV1). When I drag them down only the Audio for the clip is recording during playback. How can I fix to make sure the video track also records? Thank you.
===================================
There are many types of AVI files and many if not
most is problematic in all versions of Movie Maker.Best bet would be to convert AVI files to the
Before you import into Movie Maker WMV format.There are to many converters available on the net...
some free, some details... the following freeware is
just an example:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) Freemake Free Video Converter (freeware)
http://www.Freemake.com/free_video_converter/
(Windows XP / Vista / 7)
(* Read * all * the installation screens... it)
may be a few items you want to unmark *)When you have installed Freemake... Open Freemake
and drag and drop your video files on the main screen.Or... Click left on the video button and navigate to the
your video files are saved in the folder.Select (highlight) the files you want to import into
Freemake and left, click on the button 'open '.When video files are imported into Freemake,
On the left, click the WMV icon at the bottom of the screen.The 'WMV output settings' screen opens.
Choose a folder ' save in ', so you can find the
converted files.On the left, click the "Convert" button and wait for the files
to convert.That should do it...
-
After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie. All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes. Is it possible to move these clips to which they belong without having to recreate the whole project?
What happens if you try to read the project in Movie Maker?
Looks like your project .mswmm file is corrupt (starting
Perhaps more than the best approach). The project can be as far
too big and too complex to publish (save) with success as a
video file.I suggest that you create several small projects
and publish (save), each of them in the. WMV video format
and then re-import the collection. To combine WMV files
in a single movie.You can also import collection. Clips WMV to DVD
Manufacturer and each clip, would have become a scene (chapter)
on the DVD.The following article is maybe worth a visit:
Movie Maker - how to divide a project complex smaller?
http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm -
Video clips will play only for a second before stopping in Movie Maker
I am experienced with Movie Maker, but now when I try to set up a series of video clips, the video only play for one second (literally) before coming to rest. I tried several video formats without success. I am currently on updates and have never had this problem before. WMV files are choppy and slow and sometimes stop, too.
Hi NessaWest,
1. did you of recent changes on the computer?
2. you receive an error message?
I suggest that you disable audio and video filters in Windows movie maker and check if it helps.
Video and audio filters are programs that are installed on your computer that help interpret video files so that they will display and play correctly. Windows Movie Maker uses when you import a video and audio, extract your project on the table of storyboard / timeline, and when you publish a movie.
(a) open Windows movie maker
(b) click on Toolsand then click Options.
(c) click on the compatibility tab.
(d) do one of the following:
· To turn off a filter, clear the check box next to the name of the video filter.
· To activate a filter, select the check box next to the name of the video filter.
· To restore the default list, click restore all defaults.
When you restore the default settings, the list and the filters settings are given to the last known good setting.
Video filters in Windows Movie Maker: frequently asked questions
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How do I resize the height of the "to:" pane?
I've recently updated to v12 and now has to scroll through a long list of "to:" addresses. Previously, I could grab the bottom of the topic pane and drag it down with the recipient pane, expanding both, to see all addresses at a time. Windows Vista E
-
USB stick does not appear on the desktop
With the help of Mavericks OSX, I just format a USB Flash drive; but the Flash drive icon appears on the desktop. What should I do to get the icon to display on the desktop? (I formatted a formerly DiskWarrior USB Flash Drive).
-
user credentials come in 2nd page.
I develop an application that my customer enters his user name and password and Firefox asks whether to remember or not, and when the user clicks on a guard in memory the same details are displayed on the next page, I don't want.
-
HP pavilion notebook pc 32 bit crack cardreder g7-1077nr does not
my pc is hp pavilion g6 series before I changed to pavilion g7 1077nr motherbody. When the card reader has stopped working. Please help.
-
How can I get windows xp to open a new window each time?
How can I get windows xp to open in a new window every time