Audio popping up on imported Clips

Similar Questions

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• Imported Clip mp4 for AE... audio CS5.5 isn't here.

  Hi, I have AE CS5.5.  I imported a video music mp4 in Prem CS5.5 Pro, I did.  I did a new comp in AE before importing the file of 4 minutes.  I'm just my feet wet with AE so am puzzled as to why the audio has not been imported as well. Is there a setting I'm missing?  Thank you!

  You probably use just the wrong option.

  Button "play" in AE is not playing the sound, you must instead use Preview RAM (extreme right button in the Preview Panel).

  See more help on the preview video and audio in AE.

• No video shows when you import clips in movie maker mpeg video

  I am running xp home with service pack 3 installed. When I try to import mpeg movie clips in moviemaker now only the audio shows, before they imported correctly.  I've done this before and the films I've done import and play very well, but when I try to import clips I origionaly used to create the film there is no video. the clips play fine in media player, but not in movie maker. What has changed.

  Hi, Johns53,

  Have you tried to uninstall Service Pack 3, restart the computer and restart the clips?  They work then?

  If so, reinstall the SP3 and perform the following steps

  Visit the site of the manufacturer of the video card driver updates

  Open the Device Manager

  Right-click on the video driver and select Update driver

  Right click on the driver and select uninstall

  Restart the computer

  Windows will reinstall the drivers

  Clips of retry.  They work now?

• I can't import video clips in the timeline. Import clips from video al chronology of first CC,

  I have a problem. I can't import video clips to the timeline, it is important only audio. I have hand appears locked. How should I do? Thank you!

  I have a problema. No puedo import clips from video al chronology of first CC, solo importa el audio. Me appears the mano locked. How solucionarlo? Gracias! @

  Hi Albert,

  Please visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you

  Ilyes Singh

• Audio video lag after edition clip in the first 13 items...

  System:

  Win 7 Pro 64-bit with SP1

  ICore 7

  8G ram

  Video RAM 1 G Nvidia Quadro FX 2800 M 1920 x 1200 dpi screen resolution

  DirectX Runtime 11.0

  C: 500 GB SSD

  E: 1 TB SSD

  First 13 items in Expert mode

  All the imported clips are .mp4, constant 29.97 FPS, H.264, 48 kHz, 16-bit stereo .mp3

  
  

  I added four clips to a new project and cut ahead a few seconds of the last element. After that, the video accusing the audio on a second in the playback window by I drag the time indicator current early at around the center of the clip. After, it starts fine but starts to lag after a few seconds. The first three clips have not been published and they follow as they should. This could be a type of game/option up problem?

  Thanks for your comments,

  Inter Mundos

  INTER MUNDOS

  Great news. Looks like you have sorted through your problems successfully. Great job.

  Just in case reference. Rendering of the chronology does not solve anything. It is strictly a preview feature that uses a line of color to warn you if you look at the best possible overview... no colored line or medium green without chronology made necessary or available... orange line means requires chronology made to get the best possible overview in the monitor area reading Edit. If you get no coloured line when you drag your media on the timeline for the first time, it means that your properties of the source and the project settings match... and you look at the best possible overview. Therefore, whenever you change the video, you get orange leader with all the consequences that go along with. Moving... edit, orange; Rendering of chronology, green and so on.

  I don't know if there is no promise for the clip that began the case. You might consider taking in the free Handbrake program and determine if the export of the file from here H.264.mp4 gets rid of his problems in Premiere Elements.  https://handbrake.fr/

  Best wishes

  RTA

• Import clips from his lack of Sony HXR-NX5E

  Hello!

  Thanks Adobe to bring us first, but in 2012, according to me, that the import clips should not be so annoyingly difficult.

  I imported clips using "import" and «media browser.» Two ways to let me with picture but the sound is "not there", or sometimes very "crisp/digital." Clips of same see to VLC player works fine, but the sound does not come from my helmet. For some reason, it's using the internal speaker, but it seems OK. I use sony HXR-NX5E, first CS 6 and I am on win 7 64 bit. Don't know what sound card I use.

  Update: prelude (never used before) I can see soundwaves and hear the noise? It is low, but can be used. Now... What can I do to get into the first and preserve the sound?

  Thanks for the ideas...

  G

  Hello!

  Jeff Merci for your help. I discovered that the upgrade of MasterCollection (creation) 5.5 to 6 makes the difference about this problem. Files now import correctly. They are not under MC 5.0 and 5.5. Boring!

  For any other still struggeling 5.5 and the same problems I have no solution, but in response to Jeff:

  1 tried both:

  (a) copy all folders and files of the map

  (b) imported only the master to mts

  2 it is correct. Bad Examplefile, but the same problem on other files with the longest span (check Media Info below another file)

  3 no, but the camera have two bays of card. All content has been saved on this single card. I can't believe that something has been recorded on the other card. That would be awkward and files from one card work in Prelude (poor audio) and VLC as they are.

  4 as well as the rules on the media. Problem is the software/hardware/operating system?

  General

  ID                               : 0 (0x0)

  Full name: D:\PRIVATE\STREAM\00026.MTS

  Format: BDAV

  Format/Info: Blu - ray Video

  File size: 109 MiB

  Duration: 38S 463ms

  Overall bit rate mode: Variable

  Overall bit rate: 23.8 Mbps

  The overall maximum transmission speed: 24.0 Mbps

  Video

  ID: 4113 (0 X 1011)

  Menu ID: 1 (0x1)

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: Yes

  Parameters of the format, Reframes: 2 images

  Codec ID: 27

  Duration: 38S 400ms

  Bit rate mode: Variable

  Bit rate: 21.3 Mbps

  Maximum bit rate: 22.0 Mbps

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate: 25.000 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Bits /(pixel*Frame): 0,412

  Stream size: 97.7 million (89%)

  Audio

  ID: 4352 (0 X 1100)

  Menu ID: 1 (0x1)

  Format: PCM

  Parameters of the format, "endianness": Big

  Format settings, sign: signed

  Multiplexing mode: Blu - ray

  Codec ID: 128

  Duration: 38S 475ms

  Bit rate mode: Constant

  Flow: 1 536 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling: 48.0 KHz

  Color depth: 16 bit

  Behind the video:-80ms

  Stream size: 7.04 million (6%)

• How to set up specific folders and import clips in their

  I want to create a number of files within an event in the final cut and then import clips dedicated to these files individually

  FFolders in the events hold no clips; they hold collections. What are import you, HDD or camera? If there is no way to assign the collections of keyword for them to a camera. If a hard drive you can use folders and marking in the Finder.

• HP n 13-s128nr x 360: B & O audio pop | Pavilion x 360

  Hello

  Whenever I play the silence audio using headphones, there is a strong POP!

  It is similar to the sound that we hear if you plug headphones into a sound source while he plays.

  I can feel the helmet speakers POP, even if the audio / video cannot start with silence.

  It of as if the sound system went to sleep and wakes up when I play an audio file.

  It is very annoying and distracting, and so strong she likely isa of blow speakers.

  What happened since I bought, with the default settings. My noise is low (10%). I have check the b & O, panel data and the audio panel of windows. Nothing is unusual.

  All responses appreciated

  Hi, I have been looking for a solution to this problem and found that not using the Realtek HD Audio Manager/B & O stop audio popping. The problem with this driver is that it makes the card its close after 10-20 seconds of no audio output in order to save battery power and to our advantage, there is no way to disable this "feature". What you mean, its break-up, is similar to the helmet being handed over to since the sound card is rebooted, like you the assumption. I see that the audio is not as great after this fix. To do a choice so audio sacraficing a little quality to not burst or better audio quality and popping. I found these steps of the forums hp here, thanks to SteveCT99.

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio.
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with thehigh definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes

  I hope this helps!

• How can I tell imovie to send Import Clips?

  Hello everyone,

  I appreciate all the help this forum helped me to this day.  Thanks again to all who responded!

  My workflow is 1.   Take my SD card in my panasonic camcorder and put it in the drive 2.  To import the files, use iMovie.  However, is it possible to import them to another hard drive?  I can't set the location.  Also, I have no idea where they take the clips.  Is it possible to find individual clips that I can access outside of iMovie in which if I click it, it will play the clip?  I heard that iMovie it encapsulates all in one giant file.

  Also to create a movie, first IMPORT the clips to a large bank I am talking about above, so I ENTER these clips on a PROJECT?  I am curious about others ' work flow.

  Thanks for your help here!

  Joe

  When you import clips, they will be placed in the selected event, but you can change this with the ' import to:' field:

  

  The clips will be stored here where the library containing this event is registered.  If it's on an external hard drive, then the clips go.  If you go to the library (extension .imovielibrary) with the finder then right click > view the contents of the package, you will see folders for each event and each project.  Within each of them will be a "Original media" folder which contains the imported clips.  You can play or copy them from there, but changes nothing in the library.

  The normal workflow is to import clips into events and create projects and drag and drop clips from the events in the calendar of the project.

  Geoff.

  PS in the absence of other information, I assume you are using the latest version of iMovie (10.1.1)

• I can no longer import clips for my external drives... final cut gives me the ability to import on my hard drive... you just buy a new drive for G and I have the same problem

  I used to be able to import clips on my external drive of G and change events I had saved on the drive, but this problem started after I tried to import video from a camcorder sony I had connected the G drive.  Now when I try to import the clips, it don't give me the possibility to choose one of my records G, I can only import directly on my hard drive.  I can't open the previous events I backed up on my external drives.

  What version of FCP X?

  Russ

• I'm trying to import clips in first pro.  Whenever I try, first pro crashes

  First CC Pro v9.0

  My clips come from a Canon XF305, in folders with CIF, XML, MXF and SIF files.  In the past, just the MXF files were imported.  I insist on all records containing elements I want.  When I hit import a screen will appear with a 'serious mistake' that requires Adobe Premiere Pro to stop. "Can anyone help?  Thank you

  Use the Canon XF utility on Monday to make a backup. Then Tuesday to an incremental backup in the backup directory.

  Import clips from the backup using the media browser directory.

• Is it possible to add audio keyframes to a source clip in the source monitor?

  Hello, is it possible to add audio keyframes to a source clip in the source monitor? (Not the chronology)

  I would like to dive and pre selectively switch off at the source-clip in the trash.

  Bonus round... are waveforms audio visual available somewhere in the source monitor Panel?

  Perhaps with a thread of keyframe-able?

  Thank you very much

  You can not key frames in the source monitor Panel (the Master Clip function applies not to the audio only).

  For the waveform to appear: fiddle the cursor or the playhead in the SM. (this is a bug).

• Audio popping in 2015 CC?

  Did someone else knows audio 'pop' in 2015 CC when replaying a timeline?  It happens at random times.  If I stop and restart on the area which had a pop, it's gone.  He is not popping up on the audio source and this problem did not exist in 2014 of CC.

  Hi BSBeamer and others on the wire.

  Did someone else knows audio 'pop' in 2015 CC when replaying a timeline?  It happens at random times.  If I stop and restart on the area which had a pop, it's gone.  He is not popping up on the audio source and this problem did not exist in 2014 of CC.

  Yes, I'm seeing this here on the forum and on social networks. I'll report the problem and obtain a written bug. You can do the same thing here: http://adobe.ly/ReportBug

  Thank you
  Kevin

• Settings of the source is now gray for each new r3d imported clips

  At some point, I'm now impossible to import a new clip of r3d (old and new project) with the Source not grayed out settings. Relocation of REDCINE-X has not been set. Reset has not been set.

  Previously imported clips are clickable Source parameters. A same re-imported clip will also be grayed out option.

  Question was not existing yesterday on Premiere Pro CC 2015...

  For any clip of R3D (or another format that used to have the Source settings) imported CC, 2015, the settings feature moved to Master Clip effects. If you import a clip of R3D CC 2014 project, then the Source settings will be enabled in the project Panel.

  Excerpt from the doc for help:

  Parameters of source code available in the effect controls panel

  For RED, ARRI, CinemaDNG, DPX and Sony F65 media files, you can set the Source settings using the master tab in the effect controls panel. Previously, the settings of the Source were available in a modal dialog box.

  Summary of new features