Audio problem and possible solution, probook 4530 s, Windows 7 64 bit

Similar Questions

• HP ProBook 4530 s: igdpmd64.sys BSOD on HP ProBook 4530 s Windows 7 64 bit

  I used my HP ProBook 4530 s with 64-bit Windows 7 and Internet Explorer 8 (IE8) installed for 2011 with no problems.
  Recently I upgraded Windows SP1 and IE10. Everything works well except one thing.
  When I run IE10, open a few tabs and hoover my mouse on the icon IE10 so that it shows the small windows semi-transparent my PC crashes.

  It shows the blue screen with PAGE_FAULT_IN_NONPAGED_AREA message caused by the igdpmd64.sys driver.

  (1) I found in the HP forum post "BSOD on HP Envy14t igdpmd64.sys".
  I followed the recommendation of uninstall KB2670838.
  However after restart of PC the IE10 disappeared and IE8 is back to life.
  I've updated Windows then tries to block the installation of KB2670838, but it was impossible since KB2670838 was not indicated on the list but somehow "installed in the background.
  So I was at the point of "all works fine except one thing.

  (2) I found another post on the forum who recommended to upgrade the driver igdpmd64.sys.
  I went to: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058
  Choose: Drivers - Graphics (3)
  Downloaded the new Intel Graphics Kernel Mode Driver 8.15.10.2559 2012-02-22
  However during the installation process, I received a message (2A):
  "This computer does not have the minimum requirements for installing the software.

  I called HP support who advised to install the previous version of the driver.
  I did, but got the same message (2A)

  I called HP support once again who advised to install the driver from the Intel page.

  (3) I went to: https://downloadcenter.intel.com/search?keyword=Intel%c2%ae+Q45+Express+Chipset
  Downloaded: Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (exe)
  version of the driver 15.17.19.64.2869 (8.15.10.2869) for Intel® integrated graphics.

  However during the installation process, I received a message (2A).

  I have no more ideas. Could someone help me please?

  Best regards

  Sylwek

  I know it's weird that I reply to myself.
  HP support advised me to install the ATI video driver and Control Panel

  to:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_101995_1&swEnvOid=4059#tab1

  He helped :-)

  Thank you HP support Poland

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  Hi Charles,

  
  

  It is specific to a particular file or all the files that you are trying to open, gives you the error.

  How you open the same file using Preview on Mac.

  
  

  Thank you

  Vikrantt Singh
  

• Not found network controller driver, the hp proBook 4530 s, Windows 7

  I use a laptop (4530 proBook s), with Windows 7, 64-bit and in Device Manager I get a yellow exclamation in the network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN driver (s). The packacge driver extracted himself, and there is no confirmation of the installation of finishing.

  The problem started after an update of the BIOS by the wizard of support from hp on my pc

  Hello:

  Here is the link for the driver you need for your wireless card.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  Paul

• I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  the laptop contained Home Basic windows 7 (64-bit) and I want to install windows vista Home premium (32 bit) on a bootable partition that it will be possible to do or tell me the parallel method to move a certain 32-bit operating system...

  I do not understand your question. If the laptop can run Windows Vista, it can probably run Windows 7 too.

  To run Windows 7 64-bit, the processor must be a minimum Core 2 Duo.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

• Is it possible that I can put Windows Vista 64 bit OEM on eMachines W3644

  Original title:

  EMachines W3644

  I have a question. Is it possible that I can put Windows Vista 64 bit OEM on eMachines W3644 since I have 2 1 GB of RAM for 64 - bit?

  Hello

  You will need to check with eMachines to see if Vista 64-bit drivers are available for this model:

  http://www.eMachines.com/EC/en/us/content/drivers

  And to use the 64 bit OS properly you should at least have 4GBs of RAM

  See you soon.

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• I have a Toshiba laptop with Windows 7 Professional 64 bit installed and would like to change to Windows 7 32 bit. How can I do this?

  I have a Toshiba laptop with Windows 7 Professional 64 bit installed and would like to change to Windows 7 32 bit.  How can I do this?

  Original title: Harold

  Usually this is impossible on computers with Windows 7.  In almost all cases, you need to go to the store, buy Windows 7 32-bit and use the CD to install it on your computer.  This also requires the deletion of your system, you will need to reinstall all your programs and settings.

• Audio problems and mask when reading not on no FULL quality

  Win 10
  I7 6core
  GTX980 4GB - had the same problem with the previous cards + latest drivers are used and have had the problem with older drivers.
  32 GB of Ram
  Body CC2015

  Working with and reading Dragon RED 6 K images on the timeline, the audio track falls inside and out. The meters also stop working when audio is de-energized. It matters little if the audio is the zero song recorded on the RED or if it is external audio synchronized to the top. The issue seems to only happen when the playback quality is not set to FULL quality, what quality is set to FULL rear audio playback perfectly reading Dragon 6 K sequences in real time is a bit beyond my machine if it isn't really a viable option. The question goes as far if I disable the layer with RED film and just play the audio layers so the audio recorded appears to be very well.

  According to the other forum posts, I tried compliant audio to a drive other than the one with the RED film. I also tried to move the audio to another drive as some have suggested that the issue was on the HARD drive that contains the images RED 100% reading. None of these options worked. I can never remember running into this issue Edition and playback of images of RED EPIC 5 K. And did I not the audio problem when working with lower resolution files.

  I also met other issues in trying to work with the Organization of reading other than that of the TOTAL quality. The use of masks on effects GPU accelerated often causes the whole layer to move off the coast of the viewer project or black glitter during playback. When stopped everything of fine. A quick fix is reading quality INTEGRAL, but once again this is not always possible according to the number of applied Visual effects. Also the engine of reading mercury to the software not 'fixed' the issue of the mask, but it's not really useful in practice. Have had the problem of masking for a long time and initially, I thought that it was related with colorista III, so I grew up with the red giant. They were able to reproduce the issue and noticed that it happened with the other native Ppro GPU accelerated effects, meaning that it was a body does not issue a colorista problem. Support red giant apparently passed on the issue to the agency team, but that was back when colorista 3 is out and still no solution.  

  
  Let me know if you need more information.

  See you soon,.
  James

  Update: CC 2015.2

  Masking question can be solved when you right click on the viewer of the program and then click left high quality playback.

  Still no update on the audio issues however.

  Update 2: CC 2015.2

  Audio is de-energized is more if you delete the audio tracks of RED Dragons. Only play .wav files under the Dragon pictures with audio in sync, I no longer get audio drop-outs. This may apply to other codecs as well.

  First step: good audio sync with the zero track.

  Second step: remove the audio tracks of cameras.

  For me, that stops my audio stall and not to come back.

  Update 3: CC 2015.3

  High quality playback is at the origin of files PNG away from their intended position and also no longer works as it did in 2015.2. Not sure about her work at all TBH.

• Cannot clear history of the problem and the Solutions

  I have a problem who hung out in my reports on the problems and Solutions that I can't remove. Its been there since I installed Vista on my system and refers to a mistake of installing raid drivers.

  I have since installed drivers, but whenever I try to delete the problem, or clear the history of the problem, I gives me an error saying simply "Impossible to delete 1 Item.

  Anyone know how I can go about deleting this?

  Thank you
  Jason

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  If it still does not work, try to start in safe mode (repeatedly press F8 during the boot process until the menu appears) and try to use these products to delete the file in safe mode.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ProBook 4530 s: Windows will not start with bad secondary hdd

  HP Probook 4530 s

  Windows 10 64 - bit

  Hi all

  I have my windows installed on a Samsung 840 Series SSD 120 GB and a WD 320 HDD as secondary drive in a basket in the dvd disc space. The two worked very well.

  I got 301 MB of unallocated HARD disk space and the rest as a partition.  I used MiniTool Partition Wizard 9 wish that one partition with all the space unallocated. After the changes have taken effect, it showed the hard drive as a 'bad disk '. I thought that I should restart windows to solve this problem. After that restart the laptop is stuck on the start screen that you can access the BIOS, the caps lock light flashes 5 times several times and then stops. The hard drive seems to be on and I can't access BIOS.

  When I remove the disk hard windows starts very well.

  I solved it myself.

  Set quick start.

  then the drive gives a letter.

• audio problem when you play via HDMI in windows 7

  I'm reading of movies from my pc through my external graphics with my bravia sony using a HDMI cable, I can see the video but the sound is not coming. I have made some changes as the choice of the audio system by default etc but to no avail. could u please suggest me the exact solution that will be useful for me.
  MY id windows 7 64 bit OS.

  Hi rahul_8505,

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, see sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sound-cards-frequently-asked-questions

  However, try the steps below and go back with the results to help us better solutions to the problems

  i. click on the button 'Start '.

  II. click "Control Panel."

  III. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  IV. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices.

  v. This will bring up a window titled "Sound".

  VI. on the tab 'Read', are listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  VII. There will be a check box this option.

  VIII. the sound must now play through your HDMI is connected to the TV.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Audio problems with Thinkpad z60t 2511 after installation Windows 7

  I'd appreciate any help in solving, why I can not get sound/audio after installing Win7 on this Z60t.

  After a clean install of Win 7 on a hard drive put on level, I downloaded and installed all the drivers/software from Lenovo web site that was listed for win 7 but can't get sound to work.

  Display messages mean no installed speakers.  But the speaker in the keyboard buttons provide Visual bars when raise / lower sound or turn off sound.

  Is this a defect of Lenovo does not support win7?

  Thanks for any help

  Pete

  I had exactly the same problem and fixed it and get my sound buttons (if the works display part)

  (1) download the installation of XP SP3 driver file

  77a224ww.exe of the site

  (2) run the program will run and upack all the device drivers and the installation file

  3) click and run< device manager="">

  4) click on the sound and video controllers

  (5) run the update device driver and use the choice that allows you to specify where to look and that it points to the directory/drivers/win/audio of the/smaxwdm/w2kxp where are located the soundmax drivers and load

  Works great!

• Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)

  I just upgraded from Vista to Win 7 Ultimate.  Once installation is complete, I tried to update the drivers and install the latest updates.  Everything worked except for HP LaserJet 4 L driver.  As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246.  I then removed everything from the spool directory, rebooted and tried again.  This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.

  I can't find the information for this error (80070706) anywhere on the web.  Any help would be appreciated.

  More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable.  Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.

  Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist.  If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.

  Everything is running as an administrator.  It worked perfectly under Vista.

  Thanks for these links, but these proposals did not help nor solve the problems.

  After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos".  Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility.  Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.

  In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur.  Cryptic error numbers and unnecessary event log entries did not provide useful clues.