Audio problem when using an HDMI cable

Similar Questions

• Overscan disabled when using an HDMI cable

  Then for a while now, I use my laptop computer while it is plugged into my TV. But the parts of the screen are cut (top, left, right and bottom, which makes no sense since there is no reason to cut the sides) I've seen guides tell you how to disable overscan in the video card settings or in regedit, but the thing is, I don't HAVE a VIDEO CARD. Online guides assume that you have one, but I don't have my laptop is as clear as possible. How can I disable overscan (if possible)?

  I have searched through my TV settings but found nohting even remotely associated with overscan settings.

  I have a hp pavilion 15-n221sa running windows 8.1 and I try to get the display to work on a samsung le46b650 tv.

  Hello

  The overscan problem is TV, NOT computer. You still have the manual? Please check or try:

  • Turn on your TV high-definition Samsung set using its remote control.
  • Press the 'Photo' of your Samsung remote control button once. This will change the aspect ratio of the image that is displayed on the screen. This will also allow you to see all of the different modes of 'Photo' that are offered to you on your Samsung TV. For example, the 'Full' image mode displays the image in full screen and you will find all of the image, including the parts usually cut by overscan. The "Stretch" image mode stretches horizontally an image composed for an old TV, square to fill all of your rectangular form Samsung TV screen.
  • Continue to press the remote control 'Photo' button until the selected picture mode is one you're satisfied. Then, press "Exit" on your remote control to exit the on-screen menu system and return to watch TV.

  Kind regards.

• audio problem when you play via HDMI in windows 7

  I'm reading of movies from my pc through my external graphics with my bravia sony using a HDMI cable, I can see the video but the sound is not coming. I have made some changes as the choice of the audio system by default etc but to no avail. could u please suggest me the exact solution that will be useful for me.
  MY id windows 7 64 bit OS.

  Hi rahul_8505,

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, see sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sound-cards-frequently-asked-questions

  However, try the steps below and go back with the results to help us better solutions to the problems

  i. click on the button 'Start '.

  II. click "Control Panel."

  III. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  IV. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices.

  v. This will bring up a window titled "Sound".

  VI. on the tab 'Read', are listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  VII. There will be a check box this option.

  VIII. the sound must now play through your HDMI is connected to the TV.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I currently use an HDMI cable to connect my laptop to my TV for streaming video. Anyway is to close the Mac but still flow from it? Right now it just runs in "standby mode", and the connection is lost.

  Hi all

  I currently use a HDMI cable to the video stream from my MacBook to my TV. It works fine except that it doesn't seem to be a way to close the laptop and always maintain the connection with the TV. First of all, I do not leave my laptop open, exposed if you want, when you're arms reach. Then, when it is connected to the TV, it is at least 2 to 3 yards away. In addition, I have recently adopted a cat. His favorite thing to do is to tap dance across the keyboard. Therefore, I am more able to let the laptop taken in isolation within the connective range of HDMI cable because the cat will walk on it. In any case, I tried to find a way to close the lid of the laptop, the laptop to stay awake and keep the connection to the TV. Any ideas?

  Thank you

  Sally

  See if there is a solution:

  https://support.Apple.com/en-us/HT201834

  Ciao.

• Audio problem when I capture video in Movie Maker

  Hello

  I have an audio problem when I capture video in Movie Maker (version 5.1, using XP).

  The sound is out of sync, the sound is played several seconds before the video.

  His 18 months ago that I tried to capture video with movie maker.  y at - he miss an update

  What can I do to solve this problem, please

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://www.windowslivehelp.com/forums.aspx?ProductID=5

  It will be useful.

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• HP Envy 360: Boot Device no error found - when you use a HDMI cable only

  Boot Device not found error - when I connect an HDMI cable to my Dell monitor. (I do with this laptop in my another desktop and it works very well).

  "Please install an operating system on your hard drive."

  F2 for HDD diagnosis (3F0)

  Go to hp.com/go/techcenter/pcdiags

  As soon as I disconnect the HDMI and reboot everything is big again.

  I tried with 2 HDMI cables of different (one that works very well in my office and my HP Monitor).

  I really need to use a large monitor when you work... any suggestions?  Thank you! -kelly

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer throws to a not found error message boot device when it is plugged into an external monitor via HDMI. It will be a privilege to help you.

  A remarkable work was done by an extensive troubleshooting before asking the question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and the value certainly your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  Please perform a hard reset to see if the computer goes off and changes things. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.
  • Please perform a default bios also.

  Please check in the bios if the bios can be extended to this monitor via a cable HDMI to work.

  If please check on another screen as one TV (not another monitor) with the computer for windows startup and the cable connected to the TV HDMI to further isolate the issue.

  Please update the bios, the chipset and drivers of this link http://hp.com/drivers graphics cards

  Please visit these links for assistance: http://support.hp.com/us-en/product/HP-Spectre-XT-15-Ultrabook/5296019/model/5333249/document/c01186408/

  Link 2 http://support.hp.com/in-en/document/c01443463

  Run the system diagnostics without the connected HDMi cable, that if you don't have not done from the above link 2. You can ignore the link 2 If this was done without the connected monitor.

  I really hope that the problem is solved without hassle and things work fine. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution".

  Now carefully and have a wonderful week ahead.

• Downloads fail when the connected HDMI cable

  Since FF26, whenever I plug my my laptop HDMI cable to switch the output on my TV screen or pull on the cable, all my current downloads fail.
  Any suggestions why this could be would be very appreciated!

  Hello z_smith,

  Please contact the Mozilla Support.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  See you soon,.
  Patrick

• Screen black after using the HDMI cable, but still slightly visible screen

  Hei

  I got a c850-10 X. Brand new. Used only for a week or two.

  When I connected it to my TV (LG 42') with a HDMI cable it worked fine. But when I do not use my TV as a screen of my laptop is a black screen. Now I can only use a second display as screen alone because my laptop screen is black all the time. It is not completely black, I can still see my desktop slightly behind some sort of black cloud. If I make the screen brighter, I see a little more.

  (It is not the "shear screen" or "Fn + F4" problem, my screen on the laptop is just black. No matter what I do)

  I read a few tips and tricks on the internet for this problem, and I tried the switch off, remove the load cable and remove the battery and press the power button for 30-60 seconds before I put in the battery and then restart my laptop. But still no luck.

  Why is this happening? Anyone know? What is a wire between the screen and the under part of the laptop?

  A driver problem? Tried to uninstall the driver from the Intel card, but then the screen went APE, so I reinstalled it again.

  Everything worked fine until I used my TV as a screen ekstra...

  I have an older Toshiba laptop where the same problem apperied, but this laptop has served for about 4-5 years so I thought that I just get a new...

  Post edited by: lars.hel

  When you want to use for laptop only and disconnect the switch to HDMI cable to LCD only by using the FN + F5 key combination and when you see the desktop on the screen to disconnect the HDMI cable.

• Re: No sound using a HDMI cable

  Hi, first sorry for my English, but I m French

  So my problem is that when I connect to my pc to my TV with HDMI Cable I put t get the sound than the screen
  Please help me with my problem.

  Can you please tell us which laptop model you have and what operating system are you using?

  Anyway, click with the right button of the mouse on the speaker symbol in the taskbar and choose playback devices option. Is it classified HDMI device? If so try pleaser to choose the option set as default device. You hear the sound of the TV?

• HP 2509 m screen flashes and turns off using a HDMI Cable entry

  I have problems with my new HP2509m monitor. When I connect to my cable box using the HDMI connection the screen image flashes for a few seconds and then goes black for a few seconds and continues to do so. The time interval varies from May 3 to 6 seconds in each phase.

  It's the second monitor I got that this behavior. When I bought my system in October I ordered the 23 "monitor and it worked fine with the HDMI input, but I had trouble with the PC and he traded. The 2509 was introduced at the same time so I decided to share my monitor 23 "to 25", but now I'm regretting this decision. The main reason I bought the extra monitor should have the opportunity to move to the HDMI input for TV viewing, save space in my office.

  I tried the monitor using the same HDMI cable plug into the HDMI from my computer and the light is very good, so it seems to be a problem with the signal from the cable, but everything worked with the 23 "monitor leaving I think there is an issue with tuner HDMI monitor 2509.

  I searched the documentation on the HP site and google search but have found nothing of the sort. Someone has seen this and is there a solution for this? I like to keep the monitor. Thank you.

  Message edited by JudgeLeo on 03/12/2009 20:00
  Message edited by JudgeLeo on 03/12/2009 20:03
  Message edited by JudgeLeo on 03/12/2009 20:03

  Apparently, I was early to the part of the questions of this monitor.

  It turns out that the monitor is not compatible with the decoder I've had. The box is made by the Asian Development Bank and is capable of displaying 1080I content. 1080I is not the issue but because I can use a HDMI to DVI adapter and connect to the monitor and it works OK; It is, so I don't have the computer plugged into the DVI connector as I wanted.

  My cable provider was kind enough to take the monitor and test. They discovered that one of their old version of (amino) cable boxes works very well with the monitor. They swapped the box and it worked well since.

  I use my cable provider HDMI cable, so I don't know the spec version that is.

  My advice to anyone affected by the flashing HDMI display is to get a HDMI/DVI adapter and try it. They are supplied with a certain monitors so that they are fairly easy to find if you know someone who works in a computer SCIENCE Department. If the monitor displays the signal correctly then the question is probably the cable box or as another poster suggested, the cable can be out of spec.

  It is convenient to have the double monitor as a TV. The image quality is superb, but the sound is not. I do not understand why manufacturers monitor for skimping on the speakers. A monitor with its 'premium quality' would be a point of sale, and buyers would be happy to pay for the upgrade. I don't know about a lot of people like me it's simplify - remove the clutter and cables of our offices. HP are you listening?

• No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

  I have an ASUS G75VW, when I connect the HDMI to my TV, I get only audio through my computer laptop speakers or headphones, while it is plugged.  In addition, the TV picture is only 480 p.  When I check the sound icon, it shows that the HDMI port is "not connected" even though it is.  I tried to uninstall and reinstall the driver on both the NVIDIA site and the site of ASUS.  Same question.  Help, please!

  Hello

  Make sure that it has the TV volume.

  You can also make sure that the connections are appropriate. Try to connect to another HDMI port as well.

  Refer to the section: "Check if the cables are connected correctly" and set the HDMI audio device as the default value.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to consult the steps mentioned by "Karthik Vengaloor responded on 14 January 2013" and perform useful methods.

  Reference:

  Windows 8 audio via hdmi on desktop cable

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-cable-on-desktop/79aaa786-8311-4FA2-8206-0e57b8861baf

  Hope this information helps. Response with status so that we can help you.

• His problem when using AC adapter / CC on satellite

  Hello everyone, I have a sound problem when you use the AC adapter / CC in my laptop, it produced unpleasant noises. But it works very well when working with the battery.
  I had no problem before this month. I thought it was the problem with the bios and updated my BIOS as well. The problem is still not resolved. have you guys any experience about it.

  Looking to hear from you guys.

  Hello

  First, I would try to update the audio driver. Check out the Toshiba page and reinstall the driver. If it doesn't solve this problem, I guess that there must be something wrong on the motherboard. Unfortunately, it is not easy to say exactly what's wrong.
  Diagnostic tests are needed to find the fault.
  In this case, a call to the service in your country partner would be very good idea.

• Satellite L650 - no sound on the TV using an HDMI cable

  using a HDMI to connect to the TV picture cable works fine but no sound through the TV, sound out of speakers to computer. How can I configure so sound comes through the TV?

  Hello

  Usually it should automatically work but try it please check the settings in the sound properties > reading.
  Switch off the speakers and turn on the digital audio device (HDMI).

• Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

  I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

  All imput would be appreciated.

  Kite_99

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner