audio service is not running

Similar Questions

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No sound. Error "The Audio Service is not running"

  The sound stopped working on my Dell XPS M1210. I get the message "The Audio Service is not running" and the resolution of problems can't fix. Any suggestions?

  Hello

  See if that helps you.

  Do to Dell drivers and download page > equip your Dell model number > follow the prompts to find the drivers for your operating system > Search Audio drivers > download and install.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  See you soon.

• When I turn on my laptop and it does not have the startup sound, video, or audio won't work.sound icon shows the audio service is not running.

  Hello
  I'm not a problem with my his laptop. I don't get all the sounds, even start-up noise. the audio icon indicates that the audio service is not running.when I try you trouble shoot the problem. I get the message the windows audio and generator of endpoint audio windows needs to run correctly for audio work for sound. At least one of the device does not work correctly.
  waiting for answer

  Sincerely

  Hello

  Did you of recent changes to the computer that caused the problem?

  What is the brand and model of the computer?

  What issues you're having with videos?

  To solve the problem, see these articles:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.

• Problems with error Windows Audio and Control Panel "one or more of the audio service is not running.

  I'm a bit of a technophobe, but I'll try to explain my problem, I got better.  I recently had a problem with Windows 8 and refreshed my system.  After refreshing, I installed AVG Anti-virus and that's where my problems really started.  After installing AVG I have no sound and my control panel usually pop up.  The box is displayed but there is nothing in it and it sorts just of sticks, frozen.  I tried the fixes recommended to fix my sound. The speaker in my taskbar icon has a red x on it and when I try to open it it goes right to the problem-solving mode, then comes up with "one or more of the audio service is not running.  When I try "run services.msc' and try to start Windows Audio through Services I get error 0x800706cc.  I tried to uninstall AVG and reboot, but it did make a difference.  Please help, this leads me to the madness now.  Nothing I try seems to work!

  Installation of AVG is when the problems started, I would start by undoing that.  Since the normal uninstall did not help, use system restore to return to a work situation.  Check here and use the #1 option.

• Any solution for "The Audio Service is not running"?

  Searching high and low on the Internet, I can't find a solution to the difficulty of the notification in the status bar:
  "The Audio Service is not working" even if my audio works.  I find that this problem exists for many people using Win7.

  I just found this link that Microsoft provided, (which means that it is indeed a problem acknowledged by Microsoft), but without any real fix.
  http://support.Microsoft.com/kb/2011656

  Hey, someone from Microsoft can we give a hint he will never be a solution to this?

  Thank you.

  Reach:

  Control Panel > administrative tools > view local Services
  It's the "service" window, it lists all system services. Find "Windows Audio", NOT "Windows Audio Endpoint Builder.
  [just click on any service, then press the letter 'W' on your keyboard, will need you the services starting with the letter 'w']
  Right-click on the "Windows Audio" service and choose "Properties".
  You will see 4 tabs, click on the last one, titled "dependencies".
  In this tab, you will see the box "this service depends on the following system components", it displays 3 services
  Next to each service, there is a "+" icon, click on it to expand the list. 2nd service 2 child services, the 3rd service will be 1 serving children.
  Now make sure that all 6 services (3-hand, 3 children) have the status of "started" in the "Services" window you opened earlier
  Most propably you will find one of these services don't work, just start all the, then try to start the service "Windows Audio" in the tab "general".
  That's all

• The audio service is not running

  Today, I turned on my laptop to discover that the sound did not work. I tried updating the drivers, restart the computer and try the default of repair tool, but nothing has worked so far. Any ideas?

  I have Lenovo Z50

  Thank you

  Hello! I recently solved this problem on my pc. AVG detected malware in the last patch of Win8.

  However, it is not a malware and relates to your audio services.

  Start AVG, click history, and then click quarantine.

  Click on the item with the EXACT time that you started windows was last updated, NOT get back anything else. Worked for me.

• Windows 7 - the Audio Service is not running

  How to operate?

  How to operate?

  1. click the Start button, type services.msc in the search bar and press the Enter key.

  2. in the right pane, check if the Windows Audio service is started.

  3. otherwise, please, double-click the service. In the 'Général' tab, make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Service status" to start this service.

• Help - Audio Service is NOT running - Windows Vista

  Hello

  I checked several websites & forums solution to my problem before asking the question here. A week Audio feedback from my computer started to give me problems. At first the audio suddenly stops during normal operation & would not return unless I restart my system. Then I tried to reinstall my audio driver & has managed to do this. But now, I see an 'X' mark next to the sound icon in my bar of tasks & says 'Service Audio does not work' here is the penalty shot I made:

  --> Administrative Tools Panel--> Services

  Plug & Play is WE & auto

  Multimedia is ON & Auto

  Windows Audio Endpoint Builder is stopped

  Windows audio is stopped.

  I tried to start Windows audio endpoint builder & the following error msg appears:

  "windows didn't start the generator service of audio endpoint of windows on the local computer.

  "Error 0 x 80070002: the system cannot find the file specified."

  Under path to the executable, I have seen that it is looking for a file named svchost.exe.

  File seems to be present at the location even if nothing seems to happen when I try double clicking on it.

  Please help solve this problem. Because I bought a HP laptop with Windows Vista, they don't give me a Vista DVD separate to try & reinstall everything again.

  Help

  Make sure that the

  Generator endpoint Windows Audio isenabled

  and

  Start the Service Windows Audio. (Found on the top left corner of the dialog box)

• My audio service does not work - I can not use my pc on mode safe by minegold. How to return to normal

  my pc starts only in safe mode and I like the audio service is not running.

  for example, when I play something with you tube, I can see the video, but

  without sound.

  Hello

  Audio service does not work in Mode without failure.

  The services are very limited in safe mode.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Audio service does not not after download of Creative, restarts, error 0 x 80070002, the system cannot find the file specified

  Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update.  It lead me to a large download of Creative for its console related sound and SW, and things worked fine.  When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop.  When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off.  The sound message indicates that the audio service is not running.  I tried to restart the computer several times, but the results were the same.  I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified.  Where should I go from here?

  Hi Jfklinger,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
  2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
  3. click on the levels tab.
  4. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  Method 2: use Control Panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. click on Start, click Control Panel, click hardware and soundand then click sound.
  2. click on the tab playback or recording .
  3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
  4. click on the levels tab.
  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
  http://support.Microsoft.com/kb/930095

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Audio services does not... additional options for troubleshooting does not

  Recently, I restarted my laptop and after restarting, I couldn't play any music media player, iTunes or xbox music. After hovering over the icon of the sound, he says that the Windows Audio service is not running. After troubleshooting the windows troubleshooting options seemed empty and not answered. It is the same for the control panel when I tried to open it manually. Someone please help this situation is disturbing. I use a Lenovo IdeaPad touch P500 running windows 8.1. If it helps, this is happening after the recent update to annex one or two days ago.

  AVG is installed?

  If AVG has therefore been reported recently, ask questions as in the next thread that has any suggestions to remedy the situation:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Windows-audio-cant-be-started-error-0x800706cc/2f3cffd7-62e3-4b18-a604-7c1438e6a04a?page=1

• HP Pavilion 15 laptop: HP Pavilion - Audio Service does not

  Hi I recently bought a new HP Pavilion 15 and the volume down icon to the right, footer has an 'x' in a red circle next to it. When I go over it, it says "audio service does not work. I currently have no sound on the laptop.

  No idea how this can be fixed please?

  Thank you

  Hi Tom,

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe

  When finished, press and hold the Windows key and press R.  In the run window, type devmgmt.msc and press ENTER.

  Expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows load completely - it can automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click on the button set as default (it will be gray if already defined)-check if you now audio.

  If you have still no audio, hold down the Windows key and press R.  Type services.msc and press ENTER.  Search for audio Windows servive, right-click and select Properties.  If the service does not work, try to run.

  If you still receive the "Windows could not start the service windows audio on local computer» Error OX800706cc - the endpoint is double ' mistake, you're best bet is to do a Refresh as detailed on the link below.

  http://support.HP.com/us-en/document/c03538721

  Kind regards

  DP - K

• activate the audio service I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. ». Vista and the error are sometimes get is 1079.

  I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. "I've tried everything suggested to obtain a permit.  I am running vista and the error is sometimes get is 1079.

  Help, please. randean

  Hello
  I tried, but I can't yet begin widows audio service even if the windows audio endpoint is fine. miracle happened just after I tried one of the recommended web u, it finally works. IM so happy.
  the solution is to change the name of connection for NT AUTHORITY\localservice
  Thank you very much
  Have a nice week

  Seera

• No sound (audio service does not start, error 1079)

  I have no sound on my laptop.when I have troubleshooted the program that is to show that audio service does not work when I tried to start the audio service is not starting and showing an ERROR: 1079.

  I tried several times but it's showing the same...
  is there a solution for this problem?

  Hello

  Did you change your computer?

  This error code 1079, pop when you try to start the audio service?

  Method 1:

  (a) click Start, type services.msc and press ENTER.

  (b) double-click the "Windows Audio" service

  (c) click on the tab to open a session.

  (d) click Local System account, and then click OK.

  (e) right click on the "Windows Audio" service and then click Start.

  (f) follow the same steps for the service "Windows Audio Endpoint Builder.

  (g) check if the problem persists.

  I suggest you follow the link and check.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  http://support.Microsoft.com/kb/2478117

  Method 2:

  I suggest to uninstall the sound card in Device Manager and then reinstall it.

  Follow these steps:
  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically. Update the drivers manually for your sound card.

  Make sure that you have installed the Windows

  Method 3:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833