Audio stopped working after update

I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

Hello

Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

You can also check:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

Tags: Windows

Similar Questions

  • Audio stops working after updates thanks to HP Support Assistant

    I have a HP Pavilion dv6-6033, running Windows 7, and whenever an audio update is offered by the wizard for help, I'm sorry I let it install.  Car audio no longer works after the update is installed.  Usually, I just run the system restore, date back to before the audio update and give everything EXCEPT the audio update.  But this time, when it happened, I find that system restore is not restore the audio.

    I went into the Device Manager and uninstalled the IDT High Definition Audio Codec, rebooted and let it reinstall.  Still no sound.  I downloaded for the next sp55094.exe here:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101114-1&cc=us&DLC=en&LC=en... >

    Once again, I have uninstalled the Codec IDT and chose to remove it.  Then I installed the file that I had downloaded.  Restarted at the end.  Still no sound.

    Does anyone have any suggestions? My volume control is about 50% and neither helmet nor the work of computer speakers.

    Thank you!

    go to control panel of configuration/sounds and make sure on the tab devices play the idt are the default device. Click the configuration button by default down to establish it.

  • Anyone Bitmoji keyboard stop working after updating iOs 10?

    Anyone Bitmoji keyboard stop working after updating iOs 10?

    jerseryjones4 wrote:

    Anyone Bitmoji keyboard stop working after updating iOs 10?

    Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.

  • iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

    iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

    New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

    Axiomer wrote:

    New speaker of iFixit.

    It is a problem.

    iPhones are not serviceable by the user.

    You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

  • G72-a20EM screen has stopped working after updating the BIOS F.48.

    How is it possible that BIOS update recommended could turn off the LCD screen.

    Currently I see almost anything on the screen, but vga port works. But increasingly,.

    Intel graphics card is not recognized.

    G72-a20EM screen has stopped working after updating the BIOS F.48.

    What can I do to fix that?

    Good news!

    I found the working version, and it is version F.08.

    Supposedly new version have different Active cables, and this is the reason why the screen is dark.

    So, case closed, everything is perfect.

  • Multifunction HP B110a stops working after update from Hp

    I have the all-in-one HP Photosmart B110a, who stops working after applying "HP updates notification". Impossible to print or access HP Solution Center (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I always prefer to bring software up-to-date, but never for this B110a.

    Member of the family with the same B110a also had this problem today after inadvertently update, so I fixed as mentioned above.

    A lot of your time. Could someone inform me why this happens & there at - it solution. BTW I stopped (as useful as an ashtray on a motorbike) updates

    Concerning

    Thank you Gemini02, not sure what you mean by "go through the HP software. I can find the IP address in the box at tools of the HP Solution Center/printer normally, but after applying the updates, I am unable to access the HP Center solution so I wouldn't be able to change the settings. In any case, I don't want to apply updates in the future.

    Kind regards

  • Helmet of Q10 Blackberry blackBerry 10A stopped working after update 10.3. Help, please

    Dear friends! I bought a new Blackberry Q10 just a return of the week and it was on 10.2 os and worked very well, he made me a 10.3.1.1779 update which was about 1.5 GB and I opted for it. My headphone stopped working after the successful update. Besides that everything works well and good. I tried another helmet, cord to the and also tried to wipe off security and hard reset, but nothing helped. I am very worried and looking for help. Please guide me what should I do? Either it's a hardware problem or software related? PS each time as I use headphones it detects, by pressing the button answer on phone headset also Assistant bb opens but sound is not dating a helmet! What ahould do? My phone does not come in the warranty.

    Try different helmet "well known." If those who still fail in your device (but work well in another device), then the deduction becomes one of the devices, which of course we cannot do something internet remotely. Since you say that you have no warranty, you are then looking for a local store (to you) with a technician that you trust and ask them to go to a good assessment and estimate.

    Good luck!

  • My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

    Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

    Thank you!

    I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

    In

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

    The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

    Also in

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

    I added a 'Control' button with a string value "ActiveService" is"ksthunk".

    Finally, I restart my system and Windows again recognizes my camera and the driver installed!

    Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

    I hope this helps someone!

    NOW I'M GOING TO TURN OFF WINDOWS UPDATES!

  • Pavillion g6: my laptop audio stop working after the installation of window 10

    After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

    Try to update the drivers via windows update or hp support assistant. Headphones work?

  • Fingerprint reader has stopped working after update vV1.0.3.49

    I recently downloaded from Toshiba and installed Fingerprint Utility V1.0.3.49 (tc00407400c.exe) and since my fingerprint reader has stopped working.
    The software opens but usually recognizes my fingerprints and can not connect any other way.

    Have uninstalled and reinstalled several times and same result.

    Device Manager says device works ok.

    May I ask what model phone you have and what system do you use?

    Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.

    Have you tried that?

  • Access keys stopped working after update Win XP on Portege M200 and M400

    After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
    Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
    Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

    Can someone help me restore the m200 and m400 hotkeys?

    Hello

    Try reinstalling the common module for Win XP edition filed.

    The common module for Poretege you can find on the European driver Toshiba page:
    Laptop-> Portege-> Portege M Series-> Portege M400

    The common module for Portege lies in
    * ARCHIVE *-> Portege-> Portege M series-> Portege M200

    Welcome them

  • Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

    Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

    My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

    Anyone else see this behavior?

    Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

    BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

    So far, all the stuff has failed. And now I will notify again before the update.

  • Walkman App Stopped working after update - how to fix?

    After that I did Release6b update on my Xperia Tablet S, SGPT123US/S, the Walkman App has stopped working and I can't figure out how to fix it.

    I just get a dialog box that says that "Unfortunately, the Walkman has stopped" with a button 'OK' whenever I try to run the application.

    Someone knows how to solve?

    Thanks for the help...

    try to erase the data on the app or uninstall updates, then update again.

  • audio not working after updates?

    Windows says I do updates today about 1 h 20 EST 11/02/12 time and I did it. When it was over my sound had stopped working, I tried a system restore and it did not work. Now it says my AMD HDMI Output ' AMD high definition Audio Device "is not plugged in.

    So I went online to see if other people have had this problem, and I read where something was wrong with a BIOS download and he gave a download solution. Well, who did not work when I restarted, that is when I discovered my HDMI not be plugged.

    I do no sound when I try to any clip or MSN or anything, I tried all the buttons and cut signs. Nothing. My laptop is a HP Pavilion Notebook PC g6 with the product number A6Z59UA #ABA.

    I solved this on my own system restore to 30/10/12 and my audio works now. I want to banhien for the help display well!<>

  • Keyboard stopped working after update

    Hello :)

    I've just updated my computer after the delay for some time now. Keyboard I know right - because the work volume buttons, but everything else (letters, numbers, etc.) have failed. I tried troubleshooting to solve the problem, but it was a bust.    Initially, I had windows 8 so I feel that this should not be a problem.

    Thanks for the help!

    Not that I can think of, I've never seen a keyboard stop working in this way.  If I were you, I'll try:

    • Put the keyboard in another computer
    • Try a different USB port on the plug
    • Try another keyboard
    • Use the on-screen keyboard to run the RSTRUI command and restore before the problem started happening

Maybe you are looking for

  • Where to find the summary of all items purchased from iTunes Store?

    Due to the receipt of multiple gift cards, I had a credit balance to the iTunes store. Checked today and she was quite weak. 'My account' and 'Purchases' on iTunes store only shows apps and the music that I bought... it does not show in-app purchases

  • Pavilion dv7: Reinstall window7

    I reinstall Windows 7 basic after completely formatting the drive 'C '. but when I start the system after the installation is complete. at the start it showing both system and windows 7 application for selection. again once I reinstall and format the

  • i-link p6620f

    I have to add a connection (1394) i-link for this PC but am unable to fine one that will work with this system. Any suggestions?

  • Adding a layer that has a different aspect ratio or export transparencies.

    CS6 11.0.2.12 on Windows 8Hello. I have a project which is currently in 720 x 534. I would like to add a layer behind it that has the same height, but is wider and I don't want to spoil all the layers that are made in 720 x 534.If I try to change com

  • Prompt message

    HelloI need additional information to a message to a guest by jdev 11.1.1.4 Java class?