Audio stopped

Similar Questions

• Audio stops when the advancement of track

  Hello

  I have a 6 s iPhone that is around the age of 4 months.

  where to listen to some music or podcast apps and go to the track following, all audio stops working. Sometimes a strange, like static noise will happen. This happened only when it is connected to the bluetooth in my car stereo. The song or podcast will always be running and do forward the time, but not sound via Bluetooth speaker or telephone (with Bluetooth turned off). After restarting the phone, he picks up back where she stopped everything as nothing happened. This happened about 5 times or more, when to jump to the next track or when switching between music and podcast apps. I don't remember if I had the problem with Spotify, but when it gets no audio won't play at all.

  I appreciate all the help, it's becoming boring. I am updating to IOS 9.3 right now.

  Thank you.

  I have not had this happen again because I have updated to IOS 9.3, hoping that the problem has been resolved

• I update my windows and then this morning I was listening to show then just audio stop I try troubleshooting, but nothing happens

  like others, I update my windows and then this morning I listened show then just audio stop I try troubleshooting, but nothing can happen, you guys help me please?

  Please read this blog to find out how to troubleshoot audio http://blogs.technet.com/b/mediaq/archive/2015/07/30/windows_2d00_10_2d00_audio_2d00_troubleshooting_2d00_tips.aspx

• Windows media player in the last 5 seconds of each song there is a glitch, or the audio stops for a few seconds what can be?

  While I'm playing music in wmp on the last 5 seconds of each song, there is a pause as, and the audio stops and then finish the song '. What this can be? Please help this is driving me crazy... Thank you.

  Hello

  If you are using Windows 7, you can read the following article and check if it helps.

  How can I stop my music skip or break down when I play?

• Windows Vista ultimate Media Center Audio CD starts, but after a 1 Minute Audio stops C00D0FAB ErrorCode

  Audio CD starts playing. After about a minute, the audio stops and I get an error message indicating "YHE DISK IS EITHER DIRTY or DAMAGED.

  Please try playing some other audio CD. This happens with all audio CD, or just this one?

• Audio stops when the mp3 player is connected

  So, I had one of these cheap ipod shuffle mp3 player knock-offs. When I plug USB, audio stops playing in my speakers. When I unplug audio is back to my speakers. I think windows think that my mp3 player is an audio device such as a helmet, and so when I plug it in, it redirects to the USB port. No one knows how to tell windows not to think about my USB/mp3 player as an audio device, so I can keep the audio goes to my speakers to.

  Solved.

  My computer-> manage-> device-> Audio-> disabled device manager unknown device that was be CS002

• Why my audio stops at 59 minutes and 35 seconds in a five-hour video?

  I love live record football games using a Hauppauge HVR-1250 and WinTV7.  Most of my recording works without problem, but I have two where the audio stops just a delay in the imported video.  The specific clip to which I am referring is 04:59:56 long.  If I play on Windows Media Player or WinTV7 clip, the audio is through the entire clip.  When I import the clip in the first items 12.1, the sound stops at 00:59:35.  I can see the audio tracks in the edit window pursuing towards the end of the clip, there is no audio ouput after 00:59:35.  I have this happen on another clip, import size 03:59:55, audio stops at 03:12:45.  This clip plays as well in Windows Media Player and WinTV7.  I thought it may have something to do with the length of the clip, but I was able to import and edit a clip duration 04:13:38 seconds.  Info from the machine is Intel i5 with 8 GB of RAM (RAM is 89% used while editing this clip). Treatment is divided into three local disks.  C: has 9 GB free, E: has 70 GB of free and K: has 52 GB free.  The item appears to import ok, even if it takes some time.

  Comments and suggestions welcome.

  When you have made the file in your project, did wait for it to comply fully until you started to edit?

  Try clearing/deleting the video file to your project and then reimport it in your project. Wait a few minutes so he could comply fully before you start editing. You can watch the progress in the bottom right of the interface of the program.

• Pavillion g6: my laptop audio stop working after the installation of window 10

  After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

  Try to update the drivers via windows update or hp support assistant. Headphones work?

• Sony Z5C - audio stops after a while

  When you use Skype video call on my new Sony Z5 everything works normally for a while, then suddenly the person on the other end told me they can hear me is no longer. Seems that my audio input is no longer to be picked up.

  It happens with the micro and headphones use whenever I make a call over a few minutes. Comes as no matter who I give the floor.

  Usually takes about 10 minutes before that happens, but sometimes its a few minutes.

  If I then go out the call and then immediately reconnect the audio works fine again, but for a period short (1 to 2 minutes) but will be again then stop.

  If I exit Skype when the problem occurs and immediately run the micro phone diagnostic test it works well.

  The phone is running Android version 5.1.1, Sykpe version 6.13.0.608 is installed.

  Hello. That seems to have fixed. 20 + minute call, twice as long as nothing before.
  
  Thank you very much.

• "Shenanigans" with the car dock - sometimes is not load, sometimes the line audio stops...

  So - I bought the AT & T w/o the 12VDC power supply kit.

  I have three of them already, so I thought no big deal, but here is the result:

  -A supply of 500mA. No charge and the phone continues to flow.

  -A single port of 1000mA supply - I get the (fresh) lightning for an hour, then stops and begins to bleed

  -A double-USB 1000mA supply - I get the Flash most of the time, but phone seems to "slow charge" only

  I decided to buy something different. The iPad has a much higher load must be (10 watts) so I thought that the Atrix might need something similar because of the screen, BT, GPS and radio satellite continuously at the same time.

  I bought a Belkin USB power designed to support the iPad, so there a power of 2100mA @ 5VDC thinking she would probably charge the Atrix - and he did it, worked like a champ, except when it is plugged in, the audio power stops via the audio jack of 3.5 mm on the dock cable car. As soon as I unplug the power supply, audio comes immediately.

  I'm trying to find the specs on the Motorola offers that Docks with the OEM racing car but there is no information on the sales of motorcycle brand site. Anyone know?

  Does anyone else have these strange questions?

  
  

• Help, audio stop working in XW6600 with nVidia NVS 315 graphics card

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP spare part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is solved if I reinstall the NVS 290.  For both cards, I use the latest driver from nVidia.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  Hello:

  When you install new video card, it must have a HDMI on it audio chip and what happens, is that the BIOS has disabled the integrated audio system thinking not only have you installed a video card, but you have installed a map audio too.

  Then, go into the BIOS, probably in the Advanced menu, the options menu, you will find onboard audio setting.

  It will be set to Disabled. Set to active, save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  When you restart, the integrated audio system should be back.

• My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

  Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

  Thank you!

  I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

  In

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

  The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

  Also in

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

  I added a 'Control' button with a string value "ActiveService" is"ksthunk".

  Finally, I restart my system and Windows again recognizes my camera and the driver installed!

  Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

  I hope this helps someone!

  NOW I'M GOING TO TURN OFF WINDOWS UPDATES!

• Audio stops working but works after a reboot

  My audio does work more after Windows 7 has worked for awhile;

  Ideas:

  • the sound is working again after a re-boot, but once, it stops working after Windows has been running for some time. Re-bootig always solves the problem but only for a few hours, then the sound disappeared. audio problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello
  Welcome to the Microsoft answers forum.
   
  You can check the audio drivers, they are installed correctly.
  If this is uninstall them and install again.
   
  I suggest you check that the default audio device is correctly set
   
  1. click on start, type Sound in the box to start the search.
  2. click on sound in the results of search at the top of the start menu.
  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers.
  Make sure that the audio settings are configured as expected. Follow these steps:
  1. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect.
  When you are finished, close this window to return to the previous window.
  2. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.
  3. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.
  4. Select the audio device you want as the default audio device and then click on set as default.
  5. click OK to save your settings and close the sound dialog box.
  Determine if you can now hear. If you can hear the noise, the problem is resolved. If you don't hear sound, try Method 5.
  http://support.Microsoft.com/kb/948481
  You can also check perform the clean boot.
   
  To perform a clean boot on a computer that is running Windows Vista, follow these steps:
  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  When you are prompted, click on restart.
  After the computer starts, start the program and see if the problem is resolved.
  http://support.Microsoft.com/kb/929135

  Thank you and best regards,
  Azam - Microsoft Support

• Audio stopped working after update

  I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

  I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

  In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

  Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

  Hello

  Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Audio stopped working on my window 8 PC

  The audio worked this morning, but it stopped working sometime this afternoon. I tried to restart and unplug my speakers but my Majicjack phone has no audio either.

  I noticed that my PC was still under warranty, so I contacted Dell support. My problem has been resolved through the use of the package update dell audio driver Realtek ALC662VD Audio, 6.0.1.6662, A01.