Audio stops working after a while

The audio of my Hp envy 6 t-1000 (windows 8) stopsworking after awhile.  The audio comes back if I restart the laptop. I tried to reinstall the drivers updated and final audio but problem stays. Any help is appreciated.

Hello

Try the following.

Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

Recovery Manager - Windows 8.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Acer w3-810: heating problem & touch stops working after a while.

    1 year warranty, 810, Acer w3 expired, the Tablet is showing heating questions now, close the camera back and after a while to the touch stops working, touch works fine on reboot and compressed is cold. When the Tablet is connected to a network to the touch stopped working earlier than when not connected.

    to solve this problem:-J' I reset the windows. which increased the length of time in which the touch works but always to the touch stops working after a while.

    I disassembled the Tablet and found that the part that is overheating is memory [h9tknnnbpdma].

    What shoul I do, what I need to change the digitizer, software or any better solution?

    resolved:

    the problem was solved when I disconnected the cables of the digitizer and then reconnected.

  • Audio stopped working after update

    I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

    I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

    In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

    Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

    Hello

    Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

    You can also check:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Keyboard and mouse either fail to start or stops working after a while.

    Original title: keyboard and mouse problem

    My keyboard and mouse either do not work at startup, stop working after awhile, sometimes after a few hours or sometimers causing me to push the button Reset to get out every 10 minutes is on the line of support from microsoft for two hours, cost me £65, but still not fixed

    Pentium I5 dual core 2 x 500 GB disks 5700 chart logitec gaming mouse and keyboard

    Hello

    Thanks for those tips, I've considered that everything that had happened in the last weeks and remembered that my mouse was the first to show signs of problems when the red light on the bottom went dark and brilliant then a few times.

    I swapped the front mouse with a type Wireless and it seems not however solve the problem since replacing it with a different mouse to lead the problem disappeared. In my view, that the old mouse has a hardware problem that shorted supplies USB causing both mouse and keyboard stop working.

    allowed for a few days, so I guess that was the problem.

    Thank you for your support

    Chris

  • Tecra M2: sound system stops working after a while

    Hello

    I used my TECRA M2 a year without serious problems. A moth started it my problems with audio - after the start (no matter if via boot or wake up from hibernation) his (speakers) system is functioning normally. After a while (several tens of minutes, hours) sound system stops working (no sound from your speakers or headphones). No errors appear, but not sound. When you try to adjust the volume via the Windows icon on the bar the task CPU usage becomes very high.

    I decided to reinstall my M2 - the first attempt was clean install of WinXP SP2 standard support - sound problem has not changed. Today I decided to restore the system recovery CD, but the result is the same :-(

    Any idea? -I suppose that problem Council... Now, I made a mistake when entering - beeps system (such a beep as during startup) - interesting :-/

    Except sound problem - another strange thing - when I send my XP to restart in about 10% of the attempts he goes off and does not start. Starts normally after pressing power button...

    Any ideas would be much appreciated
    TX

    Hello

    Looks like a hardware malfunction.
    Maybe it s caused by overheating.
    Check the cooling modules and try to clean it with the vacuum cleaner.

    If it doesn t help you should contact the Toshiba ASP.

  • Pavillion g6: my laptop audio stop working after the installation of window 10

    After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

    Try to update the drivers via windows update or hp support assistant. Headphones work?

  • My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

    Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

    Thank you!

    I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

    In

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

    The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

    Also in

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

    I added a 'Control' button with a string value "ActiveService" is"ksthunk".

    Finally, I restart my system and Windows again recognizes my camera and the driver installed!

    Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

    I hope this helps someone!

    NOW I'M GOING TO TURN OFF WINDOWS UPDATES!

  • Audio stops working after updates thanks to HP Support Assistant

    I have a HP Pavilion dv6-6033, running Windows 7, and whenever an audio update is offered by the wizard for help, I'm sorry I let it install.  Car audio no longer works after the update is installed.  Usually, I just run the system restore, date back to before the audio update and give everything EXCEPT the audio update.  But this time, when it happened, I find that system restore is not restore the audio.

    I went into the Device Manager and uninstalled the IDT High Definition Audio Codec, rebooted and let it reinstall.  Still no sound.  I downloaded for the next sp55094.exe here:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101114-1&cc=us&DLC=en&LC=en... >

    Once again, I have uninstalled the Codec IDT and chose to remove it.  Then I installed the file that I had downloaded.  Restarted at the end.  Still no sound.

    Does anyone have any suggestions? My volume control is about 50% and neither helmet nor the work of computer speakers.

    Thank you!

    go to control panel of configuration/sounds and make sure on the tab devices play the idt are the default device. Click the configuration button by default down to establish it.

  • Windows live messenger stops working after a while

    Whenever I connect Windows live I get a message that this communication platform on-line Windows has stopped working and windows will close the program and I am started mid convo quickly. I do not know why this happens, I just reformat my computer and had to reinstall windows and have this problem since. I even tried to uninstall and reinstall new but no luck. Help, please!

    Hello AshNight,

    You should post in the Windows Live help as Mick has suggested. They will come back with help.

    However, in the meantime, you can do a repair on your own.
    Have you installed programs before this problem started? This may include antivirus, e-mail programs, etc.
    I've seen some posts where some products Antivirus and cause of conflict. So as a troubleshooting step, remove your antivirus (not just disable) and see if there is a conflict with your AntiVirus and Windows Live messenger. (Do not forget and don't go out when you do not have an antivirus installed on intenet).

    If that doesn't help, then do a clean boot and see if there is a conflict. You disable all startup items and services of third parties at boot. This method will help us determine if this issue is caused by a loader program or service.

    KB 929135 - how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • LifeCam Cinema stops working after a while

    -Very well, so I have the camera is plugged in and its detected with the drivers installed and so on. When I start using it, it will work for a good 5 to 10 minutes then stop working and the computer unplug chim will ring and his is no longer detected by my computer for an hour or so he comes back...

    I'm using windows 7 64 x an idea?

    Hello

    (1) don't you make changes to the computer until the problem occurred?

    I suggest you to follow the steps below and check if it helps:

    Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

    Follow the link below a convenience store opened.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    I suggest to return the item and try to run the troubleshooter and check if it helps.

    Tips for solving common driver problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    See also:

    Automatically get recommended drivers and updates for your hardware:

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Hope this information is useful.

  • USB 2.0 to VGA device stops working after a while, reconnected works again

    I tried without success to use this device to connect my second monitor.  It works for half an hour, give or take and then nothing.  I unplugg and plug in my lap and he does it again, and I repeat the cycle until what I got too frustrated.  I go into devices and it shows all of my devices do not work correctly, but this is not the case.  I returned a cable and got a new one, but the problem persists.  Anyone else having this problem until I disconnect everything and walk to the center of Micro.

    Hello

    • Is what type of camera?
    • If you use a different USB port it works?
    • Are these USB ports on the USB powered monitor?

    Please answer back with more information that helps us better understand the issue.

    In the meantime, I suggest you perform a clean boot and see if the problem still occurs in the clean boot state.

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Audio stops working but works after a reboot

    My audio does work more after Windows 7 has worked for awhile;

    Ideas:

    • the sound is working again after a re-boot, but once, it stops working after Windows has been running for some time. Re-bootig always solves the problem but only for a few hours, then the sound disappeared. audio problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hello
    Welcome to the Microsoft answers forum.
     
    You can check the audio drivers, they are installed correctly.
    If this is uninstall them and install again.
     
    I suggest you check that the default audio device is correctly set
     
    1. click on start, type Sound in the box to start the search.
    2. click on sound in the results of search at the top of the start menu.
    3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers.
    Make sure that the audio settings are configured as expected. Follow these steps:
    1. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect.
    When you are finished, close this window to return to the previous window.
    2. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.
    3. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.
    4. Select the audio device you want as the default audio device and then click on set as default.
    5. click OK to save your settings and close the sound dialog box.
    Determine if you can now hear. If you can hear the noise, the problem is resolved. If you don't hear sound, try Method 5.
    http://support.Microsoft.com/kb/948481
    You can also check perform the clean boot.
     
    To perform a clean boot on a computer that is running Windows Vista, follow these steps:
    1. click on start, type msconfig in the search box and press ENTER.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    When you are prompted, click on restart.
    After the computer starts, start the program and see if the problem is resolved.
    http://support.Microsoft.com/kb/929135

    Thank you and best regards,
    Azam - Microsoft Support

  • stopped working after upgrade

    Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

    I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

    New version looks ace, so please help.

    It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • Time protection real HELP in MSE stopped working after running the utility in Windows Live OneCare cleanup tool?

    Protection in real time in MSE stopped working after running the utility in Windows Live OneCare cleanup tool? Error Code: 0x800705b4

    Hello Wally,

    Thanks for posting your query on the Microsoft Community.

    The question error codes and the description that you get suggests that you are facing problem when using MSE. This problem may occur if other security software, such as antivirus, antispyware and antimalware programs, are totally or partially installed on the computer.

    I suggest to change firewall security settings or disable temporary security on the system software and try using MSE and see if it makes a difference. How to temporarily disable security software, you can view the article mentioned below.

     

    Disable the antivirus 

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

    For more details, please see the article mentioned below and see that it helps you to fix the problem.

    Real-time protection lights in Microsoft Security Essentials

    Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

    Kind regards

  • Speakers stopped working after changing the device sound card

    * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

    I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

    Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

    My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

    It is a question of another driver, or is it something else?

    Any help would be greatly appreciated.

    Are plug you the speakers into the modem?

    They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
    Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
    See you soon,.
    Jerry

Maybe you are looking for