Audio surveillance?

What do you use to monitor audio and is there a technique for this? I've heard say that some editors like to listen to their work on a few different devices/systems. Is it true and it follow you?

The quality of the follow-up that an editor needs depends on if they make the final audio sweetening or audio post-production going. All my final Mix I do myself and I have a configuration high quality 5.1 properly aligned. Most of my Mix find you on Bluray or dvd and I also check the final product on national television, this is a good test for the intelligibility of dialogue. If someone else does post-production audio everything you really need to hear is the dialogue so good semi pro speakers should be ok, I avoid computer speakers would not be expensive. In cases where the editor has to make a judgement of quality, perhaps the choice between two different takes a pair of high-quality headphones work fine.

Tags: Premiere

Similar Questions

  • Audio surveillance while the microphone is live online

    I'm going to host a seminar online and using a USB external microphone connected to the computer (a MacBook Pro). Is there a way for me to listen to audio with headphones on the same computer or will I need to connect to another to use only for monitoring purposes?

    You should be able to listen to audio through headphones.

    You try to control your own audio? If so, you may need a second computer/device, but you can also open a second instance of the meeting room on the Mac and you will hear your audio through the second instance. I would just make sure that you have all the audio options in the first room muted for you, that you hear an echo on all the other audio that it reads in both chambers.

  • Local transmitted audio surveillance

    I use JMF RTP API Manager to send and receive audio streams. I use AVTransmit2.java. I worked for the code and when I want to pass on to another machine. Unfortunately on my local computer did not play the audio, it's not as Studio of JM, who has transmitted audio audio monitor. So, what can I do to add this audio mointoring for my audio file sent. What should I do? Make another player of datasource cloneable, or worked with processor making.

    Published by: 831279 on April 1st, 2011 01:06

    831279 wrote:
    What should I do? Make another player of datasource cloneable, or worked with processor making.

    You can clone/player (play the clone, btw, not the original source of data)...

    Or you can get the MonitorControl between the processor and use it.

    Or you could add as a target for the RTP stream and then run an instance of AVReceive2 to read the stream...

  • ANY way to monitor audio files on a 70 d when shooting video?

    I know there is a meter if you go to the menu, but I want to follow live with headphones on what comes out, not what is happening.  I can monitor the entry but want to make sure that the output is not saturated.  Any advice would be wonderful.  I tried to connect the A / V cable of the camera and audio surveillance there during the filming, but it does not work.  I know that the HDMI audio is muted during recording, as well.  This isn't a minor issue for those of us who want to ensure that we have sound quality, I use a mixer and multiple sources during the shooting.

    Summersond,

    It is not a method to produce the audio signal only the EOS 70 d with headphones while recording video.  We apologize for any inconvenience this may bring you at this time.

  • How do I audition separate audio tracks in the source monitor Panel?

    I don't see anything about this in the help doc.

    I want to hear all four tracks independently of a P2 card, but when I insert an element in the Source monitor, it seems that I hear only a track, or maybe I heard all four.  Honestly, I don't know what I'm listening.

    You listen to one; Premiere Pro is screwed in that regard. Audio monitoring in the Source monitor Panel is limited to one track at a time, either EQ or stereo.

    Switch to the Audio waveform display and then click the track selector. It is default to channel 1.

    Unfortunately, it remains active for the current clip. When you're done screaming and swearing, please file a feature request for more intelligent audio surveillance: Adobe feature request/Bug Report Form

  • When I add my dLink surveillance camera media, files avi land always in the place of the consumer audio video area. Why and how can I get them to land as Visual?

    I'm trying to change some of the footage taken by our camera dLink bit when we're not home, but when I import .avi files, it will always just for audio (from first 11 elements), and nothing shows that the video. What I am doing wrong? Be aware, I am completely new to this program, because I bought to play with my camera dLink home videos and have not been able to do one thing with them as of yet due to how they import. I did 'get media' my camera Bloggie to see if it worked and he met as a video and audio only, so I do not know why the other does not.

    loriflori

    Thanks for the replies.

    Just to start my day and am very happy that you found your own answer by going in a different format for your camera.

    You recorded video compression AVCHD (MPEG4 AVC/h.264) equipped with a .avi cape. That AVCHD.avi is not compatible

    with Premiere Elements. Many previous reports on this situation.

    There is opportunity for you to make an AVCHD.mp4, instead of AVCHD.avi, in the camera settings? It should work with your MPEG4.mp4.

    When you go to read this MPEG4.mp4 (with the logo instead of the first frame of the video), you get a read full video and

    audio. If so, what is the current defined for the file is opened with. Change that can change the thumbnail representation of the hard drive. But let's see if

    There is a set of AVCHD.mp4 for recording of the camera.

    Looking forward to your results.

    Thank you.

    RTA

  • Audio recording with surveillance microphone

    Hi friends!

    The past months I have been studying if posible for recording mic s of entry to the stream server, at same time, you can ear your voice in real time.

    I used:

    mic.setLoopBack (true)

    But it s very late since you talk until you hear your voice.

    Do you think is possible to micro real-time with flash player?

    I try also:


    mic.addEventListener (SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);

    Savings info mic in table, use it as a sound to play at same time... The idea is good, but there is lag yet :-(

    I need a solution to all browsers and OS: Mac and Windows (linux is not enough...)

    Can someone help me please? Dou you think it is posible?

    Thank you. Best regards

    Jose Ramon Leon Somovilla

    Hi Jose,

    You might want this repost on the Flash Pro forums.  Flash Player forum is generally used by end users and you will find a wider audience developer out there.

    Flash Player Pro Forums

    Thank you

    Chris

  • Satellite A100-998: Audio of abandonment/glitch when CPU fan starts / stops

    Hi, I have had some problems with my streaming audio, as well as the inputs and outputs. I have read several posts on these forums of users who have the same problems, but the positions were closed without a resolution on an appropriate fix. These posts are also more than 1 year.

    The problem is that I'm an audio glitch when the cpu fan starts and stops. I updated to the latest version of the bios and installed all the latest audio, display and network drivers. and the problem is still there.

    I was my latency of the surveillance system and stop systematically various devices to try to locate the cause, but the problem still persists.

    Previous discussions of the forum on this subject suggest we find a solution by changing drivers processor ACPI to standard PC that will, among other undesirable things, keep the fan on constantly elimiating the seeds. I think that this is not an appropriate solution.

    As all other forum threads have been closed for more than a year, can anyone help me with a solution to this problem.

    Thank you.

    > Previous discussions of the forum on this subject suggest we find a solution by changing drivers processor ACPI to standard PC that will, among other undesirable things, keep the fan on constantly eliminating glitches. I think that this is not an appropriate solution

    As you know, it is only a user forum and you won't encounter technicians Toshiba here. This is why the solutions posted above was provided by individual users and may be true, but who knows if it would satisfy every user unique is only an idea and suggestion.
    I think you should communicate with ASP in your country for a notebook check possibly technicians could provide another solution that would suit everyone

    Greetings and good luck guy

  • Recording of surveillance

    Hello

    I am currently using hearing CC and I have a record in the wave-editor in Chief of the voice. My question is: How can I follow this record with my helmet?

    If I use the multitrack Editor, I can see the 'I' button, but how can I do this in the waveform?

    Looking for your help.

    Thommy

    Check-in wave form is somewhat different for multitrack recording. Even if you save multitrack, recording of surveillance comes via the software, which inevitably has a period of treatment (called latency) and this can cause problems if, for example, you try to record your own voice; the delay is extremely off-putting.

    That is why, normally, the monitoring is done directly through your audio device - and it has to be if you save waveform, as there is no other choice. The standard (and this can be difficult with some internal audio devices) is to put the headphone out to receive a signal from the entrance. It is not a problem for the hearing - faithfully records everything that he receives - it's just a problem for you. Almost all cases, it is easier to put up with an external audio device having its own Panel mixer; people have reported often difficult, especially with laptops, trying to get it works satisfactorily.

    Either way, the difference in multitrack recording and waveform is that multitrack is direct to disk, but in waveform, is written to a temporary file and not saved until you are finished recording.

  • multitrack wav for 1,5 hour files record only 3 seconds long - lost audio

    I used Adobe Audition Mac CS6 version 5.02 build 5 a few days ago to record a conference of lawyers that I get paid to save.  I have been using to record multitrack and segments that have been about 1.5 hours of recording as stereo wav files.  During the second track record after about an hour, while the surveillance on phones and I look at the interface, the track popped out folder.  and stopped.  When I checked the file wav from this record, it is only 3 seconds of time instead of 1.5 hours.  I couldn't find anything useful in the trash or the location of the main disk cache.   A search of my hard drives for files created so far there isn't anything useful either.  I have auto save every 10 minutes turned on and I thought that hearing were the basic crash protection built in.  Is it possible to recover this loss of audio in a temporary file or cache somewhere, while the law firm that hired me will not tear me up like a pack of piranhas to lose audio they wanted to sell to their customers?

    Well, if you have been recording in multitrack view, it doesn't is not much of interest in research in the trash, or any kind of disk, because in multitrack mode, cache files are written directly to disk and no to any form of temporary storage. This also means that you will not find anything in the way of a backup. I'm afraid that if the files are not where you specified whether they are when you started recording, you have almost certainly lost. If you're absolutely sure he was recording for all this time, it might well be that the header of the file was damaged when he stopped, and that it is in fact a larger file that you have been led to think. The only thing that you can try with this scenario is to open the file in a .raw, provide the sampling frequency and type info and see what opens. If you're incredibly lucky, you will get your file back to the point that it stopped, and then you can re-record it. But don't hold your breath...

    1 rule to record anything original or punch - do not with hearing, or any other software if it is the only record you will end with. You should always have a redundant system of some sort. For live recording I never use hearing as a backup to one of the hardware-based systems. I have never had chess hearing during a recording, but you can bet your sweet life that if I had been absolutely according to her, he would have!

  • Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

    After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

    I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

    But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

    Thanks in advance

    Hello StasV,

    Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

    Audio routing call - the iPhone user Guide
    Help to connect your iPhone, iPad or iPod touch with your car radio

    See you soon!

  • MBA does not play audio on JBL EXTREME

    Hello

    I tried to play music on my new JBL EXTREME of blue tooth speaker that proved no problem on my phone I have 6 s +.

    However, I can't be able to remove from my Mac Book Air!

    It's 'pairs' very well with the JBL speaker sound!

    He has played from the loudspeakers of the MBA.

    No music, no audio from Youtube on the JBL; nothing!

    I run the latest version of the software, and I restarted the MBA and the JBL repeatedly.

    My MBA plays very well with my Sennheiser Blue Tooth headset, so I think that my audio settings are OK. (?)

    Someone has an idea of what the question might be, please?

    Thank you!

    Rut

    Howdy MXP 150 Patriot,

    If you're able to pair your bluetooth with your Mac speaker, but your Mac continues to stream audio from its built-in speakers, you might check to see which device is selected in now Option while you click on the Volume control () in your menu bar. You can also check in system preferences > Sound > output.

    OS X El Capitan: adjust the audio output of your computer settings

    Note If you don't see the Volume control () in the menu bar, you can add it by checking the box "Show volume in menu bar" in system preferences > Sound.

    OS X El Capitan: increase the volume upwards or downwards

    All my best!

  • removed the audio tracks in logic pro can be restored

    removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

    Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

  • You can change the tempo without affecting/stretch automatically audio?

    My workflow...

    import an instrumental, then add a tempo meter to detect the tempo... can change the tempo of the project... but OOPS, that extends the audio file... How can I change the tempo without changing the audio file? Thank you!

    Region selected: in the region Inspector, uncheck 'follow Tempo and Pitch '.

    This will separate your audio region of tempo changes.

  • Audio stuttering on MBPro Sierra

    I'm on a MacBook Pro installed macOS 10.12 retina end 2013 (Sierra).  For several years, I have used a bluetooth JBL of Charge 2 for this portable audio speaker (and sometimes my iPhone and other iPhones).  He has always worked flawlessly.

    Today when I hit play on the audio iTunes began badly stuttering.  After several searches, advice and read everything that I could find (especially regarding similar issues on other versions of the operating system as El Cap, Yosemite, etc.), I did the following, without result:

    • Not matched and repaired the speaker

    • Restarted/rebooted both the speaker and the MBP

    • Reset NVRAM and SMC

    • Redownloaded and reinstalled Sierra

    • Reset NVRAM memory new

    The problem persists.

    Note: I have also been hang this portable projectors in the classroom for several years via a port mini display to VGA and have never had a problem.  Since the upgrade to Sierra, can I talk to is no longer in the spotlight (my MBP always spoke to my external monitors (via the adapter, even) but not the spotlight.  I wonder if these issues are linked, at least to the extent where they came after the upgrade to Sierra.  Thanks in advance for any thoughts.

    Moments after the announcement of this question, I went into my list of connection and uninstalled Knock, an application that allows to unlock the lock screen by knocking on an iPhone.  And here, the sound works fine now.

    I guess I should have posted earlier, because I found the solution immediately after.  At least the bluetooth problem is now solved!

Maybe you are looking for

  • Images in html do not correctly attached messages

    I was faced with html and Thunderbird emails recently, but I got a problem...the images included in my email are not attached and it gives me just errors, saying that the image cannot be attached, if I want to send email without it. I have images hos

  • Start problems PXE - E61: Media test failure, check cable of

    HelloI have a big problem with my toshiba satellite 3000 601. every time when I want to start it will not start and shows me: PXE - E61: Media test failure, check cable ofPXE - MOF: Exit PXE ROM. I already changed the boot order in the bios but nothi

  • What programs do you need to run it when starting a desktop HP Pavilion Windows Vista-based computer?

    I have several programs running on my start up and am not sure that is necessary and which are not.  I got a slow computer and the performance isn't there as if it was once.  I have recently removed spyware from my computer and wonder if some of thes

  • How to find my network name and address

    I'm trying to set up the fax send and receive on windows 7 and I have born my network name and address to enter when prompted. I spent all day searching the Internet for help and it is impossible to find. Help, please.!

  • BlackBerry Smartphone App World 8520 version number

    I installed the 1.1.0 version of App World on my device 8520 v5.0.0 but it does not display the icon to use. I am see in the next link http://supportforums.blackberry.com/t5/BlackBerry-App-World-Development/Supported-versions-of-BlackB... that this c