Audio transmission of HDMI to SCART on Toshiba REGZA TV 46SL863

Similar Questions

• Satellite L300-1AQ connection to Toshiba Regza 37 '' LCD AV series 37AV505DB

  I think buying the Satellite L300-1AQ, how will I be able to connect to my Toshiba Regza 37 '' LCD?

  The LCD has no HDMI VGA port only 2, is a Toshiba laptop equipped with an HDMI port?
  What is the most cost-effective way on the connection of all laptops Toshiba to my LCD TV?

  Thanks for your help...

  Hello

  AFAIK the L300-1AQ supports only RGB (VGA port) port.
  This port provides only the analog signal and I doubt that you will be able to connect to the HDMI port because you cannot convert an analog signal into a digital signal.

  I put t know the other ports that is supported by the Toshiba Regza LCD 37 ", but I think that in this case, the HDMI port is not useful.

  Good bye

• Toshiba Regza 32 '' TV - impossible to set properly

  Hello
  My daughter has a Toshiba Regza 32 '' TV (not sure exact model).
  When I try to tune the TV finds it a good set of channels, but while we are Wigan and very close to the winter Hill transmitter, he finds ITV Wales and C4 Welsh language. Instead of ITV Granada & normal Channel 4. The menu setting seems only to allow me to select UK & not North West of England. Any ideas please?

  I have the same problem with a TV caught in Southampton in Berkshire. I tried everything in the manual but still to find a solution, I would be interested if there is a response. I am considering the purchase of a separate DTT HD box if all else fails

• No picture on Toshiba Regza TV connection via a desktop pc VGA cable

  Hello

  I need help to connect my desktop PC Fujitsu Siemens for my Toshiba Regza 37 '' TV via a VGA cable.

  I bought a VGA cable, assuming it would be plug-and-play work, far from it.
  What happens is that when I connect to PC & TV VGA cable and select mode PC the screen just flickers / flashes a black screen.

  I read a few articles that you have to press FN + F8 on laptop computers, but I don't have this option on my desktop pc.

  Any help would be appreciated. Thanks in advance

  Cheerz

  Hello

  FN + F8 enable and disable the WiFi network!
  You must use the FN + F5 key combination to switch to the external monitor.

  Please also check if the VGA channel is activated on your TV.
  Then use the FN + F5 for the external video output switching

  Big names

• Toshiba Regza 37XV625D - audio distortion

  In other places I find a good description of our problem, which is that from time to time (between one hour and one day) the audio becomes blurred when using satellites. Stop and start the satellite box solved the problem. The satellite guy says it might have to do with the cable hdmi (which is short but not the cheapest).

  Other places on the internet describing the problem even say an update of the firmware of Toshiba has done for them, but as far as I know there is no one for our Regza 37XV625DF.
  Are there?

  Any suggestions gratefully received.

  Thank you
  Steve

  PS: we also lose the image and the sound of the satellite sometimes (screen becomes blue), not connected to the distortion of the sound that I can tell. Off the TV (not the appropriate power switch standby) usually fix it. The satellite guy said that more precisely it is a question of toshiba. Any ideas please?

  PPS tried change the hdmi cable, tried swapping inputs, problem occurs again.

  > audio becomes garbled when using satellite to stop and leave the satellite box solves the problem.

  I m not an expert but from my point of view, this problem is related to the (receiver) satellite rather than your TV topbox.
  In your case I try and test another topbox.

• Satellite L500 - no Audio through the HDMI to the TV connection

  I connected my L500 on my HD TV. I can control the image using FN + F5, but I have no sound. I entered the monitor audio realtek and who said that audio is now via HDMI, but still no sound. The HDMI cable seems to be ok that I use to connect my cable box to the tv. Someone at - it other corrections

  Read this article:

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  It's for Qosmio but settings can be the same for yours, too

• Dolby Digital Audio output via HDMI on Satellite A200 cable?

  I don't see how to get a Dolby Digital signal on my laptop!

  I have a screen LCD HD 1080 p television. With the help of a cable HDMI from laptop to TV gives a beautiful image. I then use an optical link between TV and Surround amplifier... However the amp does not recognize the signal as a Dolby Digital signal.

  The record is not clear on issues of Audio. The Toshiba HD-DVD player shows Dolby Digital option and I guess that's out put down the HDMI cable? I hear through the TV speakers.

  Hints would be much appreciated.

  Concerning
  Paul

  Hello

  To be honest I didn t know that there is Satellite A200 laptops with HDMI output. Can you please tell me what A200 you have (A200-xxx)? Are you really sure have an A200?

  Back to your problem: as far as I know the Digital Dolby audio can be sent if the laptop has S/PDIF port. You must also use an optical cable and connect laptop to your amp directly.

  What you do now is send the signal to the TV only. I don't really know if you can browse the Dolby signal to the amp.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience

• Unable to connect Equium to the audio help for cable TV SCART

  Hello

  can someone please help.

  I'm trying to connect my laptop to a fairly old TV using cables audio form jak headphone to my pc to connect to an adapter SCART then in my taking of SCART TV.

  I don't know what I'm doing right or wrong! I have sound but no picture...

  Please help woiuld be great, your

  HEEE? Why do you think that an audio output port could provide a video signal?
  Sorry, mate, but that's all just absurd!
  You cannot use an audio port for video! This will never work!

  If the laptop supports s-video output port, then you could connect the TV to the computer using a SCART-s-video cable.

• Audio Omni 10 HDMI problem

  My Omni 10 HDMI was working fine until I sent to HP to have the touch screen repaired.  They re-installed or updated all the operating system and drivers, so I have all the latest software.  Audio HDMI fake now after a few minutes (streaming of Netflix or NBA games).  I can unplug the HDMI cable or restart streaming, it would work for a few minutes and then again distort.  Same configuration used to work before.

  When I got the Tablet back, audio was weak.  I brought to the MS store, they may be installed DD Realtek Audio Manager, not sure, but they set up something and the sound was OK.  Unfortunately I checked the audio headphones so only, did not HDMI so far.

  Appreciate any help I can get.

  audio driver has nothing to do with the sound on your hdmi, his treatise by a video driver.

• Change the audio output to hdmi

  I have an hdmi cable connected between my HDTV and my dell xps m1330, I can get the video to transfer very well but can't do the sound of the game through television. I looked on the internet for how do to it and theres a lot of instructions for vista / w7, but I can not understand how to change the HDMI audio output in windows xp.

  Hi ccmcmill12,

  Follow the below mentioned steps and check the results:

  a. click on the button 'start '.

  b. click on 'control panel '.

  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.

  e. This will bring up a window titled "Sound".

  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  g. There should now be a checkmark on this option.

  h. the sound should play through your HDMI connections to the TV.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No audio playback on HDMI

  Coonect my pavilion dm4 by HDMI to a monitor of 23 ". No sound on video playback. Using Windows 7. Help, please.

  Hi HoSteven,

  Welcome to the Microsoft community. According to the description of the problem there is no audio over HDMI.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  I'll help you with this problem. Follow these steps:

  (a) click Start, Control Panel, sound.

  (b) go to the playback tab.

  (c) select the HDMI device and set it as default value. Click OK.

  You can read this article for more information:

  HDTV: Frequently asked questions

  I hope this helps. Let us know if you need help with windows.

• Don't the DisplayPort on the back of the audio transmission of Alienware X 51 support?

  On the back of my X 51, the HDMI port is covered with a small port, which probably means that it is not usable. The DisplayPort is available.

  I want to use the discrete graphics card for graphic output to a TV. So if the DisplayPort on X 51 supports video and audio as a done standard HDMI port, it would be the best way to do it.

  Hello

  Yes, the DisplayPort supports audio as well. The HDMI port can be covered with a protective plastic cap that can be removed. They who put there to protect the port and avoid whatever it is to get there. Try to remove it and let us know how it goes.

• How to connect my Toshiba PC to TV (Toshiba Regza 3030)?

  I have a Toshiba Regsa 37 "3030 and I have big problems with connecting to my Toshiba witch got windows XP pc.
  When I turn on the PC everything seems fine, but when windows starts runing the tv goes black. When its finished loading my backgroundpicture appears but nothing else.

  On TV it seems PC SXGA when I change the pc channel. I don't know what that means.
  I have used ours to try to resolve the problem, so I really hope someone has a suggestion about what is wrong. Thank you

  Can you please tell us which laptop model you have? What cable you use to connect your laptop and TV?

  I connect my laptop and LCD TV with HDMI cable and always on the same path. The two devices are activated, I connect an HDMI cable for both devices, enable HDMI port on the TV, and finally to use FN + F5 key combination to choose options offered and you place the TV.

  If you use another cable be sure that the correct port is enabled on the TV. I don't have a TV Toshiba, but the principle is still the same.