Audio Vista still not workin__

a\still not workinh

Computer salvation of j b,

1. When did you start to question?

2. you remember to make changes to the computer before this problem?

You can check out the following link and try to run the troubleshooter and check:

Tips for solving common audio problems

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • activate the audio service I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. ». Vista and the error are sometimes get is 1079.

    I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. "I've tried everything suggested to obtain a permit.  I am running vista and the error is sometimes get is 1079.

    Help, please. randean

    Hello
    I tried, but I can't yet begin widows audio service even if the windows audio endpoint is fine. miracle happened just after I tried one of the recommended web u, it finally works. IM so happy.
    the solution is to change the name of connection for NT AUTHORITY\localservice
    Thank you very much
    Have a nice week

    Seera

  • Satellite P100: Conexant audio only is not supported on Windows Vista 64-bit

    Last week, I install new Windows Vista 64-bit system, but not sound. I think it was the problem with the audio driver 64-bit. Is that someone has the new driver for vista 64-bit?

    It seems that some devices are not recognized by Vista common drivers that were shipped with the Vista operating system and therefore the new drivers are needed. But because Vista is not official on the market (official start is late January 2007) drivers are not published.

    But where did you get the version of Vista 64-bit?

  • Updates do not install, Sections of Vista does not and cannot start the Audio Service

    I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

    boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

    My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

    any help? Please

    Hello
     
    a. updates have you tried to install?
    (b) button to switch on the audio of your computer are you using?
    c. what exactly happens when you try to run any audio/video file?

    You can try the steps outlined in the article below and check if this help.
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

    For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

    1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
    2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    You can also try to update check you and sound card driver if it works. The article below will help you do.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, check if the following services are set to automatic.
    a. Windows Audio
    b. Windows Audio Endpoint Builder

    Here's how:
    1. click the Start button, type services.msc and press ENTER.
    2. go to any services mentioned above at the same time, right-click on it and select Properties
    3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
    4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

    After return to that exact error messages we can help you better.

    Let us know if it works.

    Kind regards
    Umesh P - Microsoft Support

  • AUDIO SERVICE DOES NOT

    Audio service does not... I get a message saying... this computer cannot play audio because the Windows Audio Service is not enabled... even after that activation still does not work... its recognizingal my reading, sound and recording... says they're all works... but still no sound... got a new sound card, still nothing

    Hello

    Refer to the steps below to solve the problem.

    Step 1:

    I suggest to refer to the link below and follow the step by step guide to fix issues with the no sound in Windows Vista.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Step 2:

    You can also check out the link below which provides an automatic fixit to solve the problem and also provides manual steps.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    If the steps above do not help you can also refer to the link below and follow the suggestions given by Linda Yen in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/56d0bf26-d5a7-42FD-9b95-d6ba89c53f6e

  • CD/DVD Rom will play audio CD but not DVD

    Hello

    I am at a loss :( The CD/DVD-rom (ID: HL-DT-ST DVDRAM GSA-T50L) in my refuses to Asus computer (Vista 64 Home Premium) laptop to play DVDs now but will read audio CDs, I put in the drive without problem. When I put a DVD in the drive, it will make clicking sounds and then turn and then turn down and then do nothing at all. I have scoured the internet looking for a solution to this problem and have done everything I could find a solution (drivers are up to date, checked registry and was fine, checked reading auto and put all ask me every time, ran auto fix - it and he just says cannot read the media type, uninstalled and reinstalled the drive) etc.).

    The drive is displayed in Explorer, but when I double click top with a DVD, nothing happens. I even downloaded the new codecs and I still have this problem. The problem started shortly after I have updated to SP2, and I've even uninstalled SP2 and nothing. I tried system restore and still no dice. I do not say that this problem has nothing to do with the installation of SP2 or anything, but the drive has worked perfectly well before that date. I initially thought that maybe the drive went wrong and think always that after trying all the solutions that I found, but a bad combo player would still be able to play audio CDs without problem?

    Any help on this would be much appreciated...

    Thank you

    Hello

    Update the BIOS can not help if the drive had worked for a good period of time however it
    is definitely worth it.

    You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
    Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Several good info here:
    http://Club.myce.com/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    -----------------------------------------------------------------------

    You did a large part of this however please start at the top and work downwards as it is often the total process
    to solve the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    ----------------------------------------------------------------

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer and a device for possible firmware updates and good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • Premiere Pro CS3-"audio recording is not possible?

    I'm reinstalling Adobe Premiere Pro CS3 on a new computer, but getting the message across "his currently installed adapter driver does not support entry DirectSound.» Audio recording is not possible. I took note of comments on the problems of his fellow men elsewhere but have not seen anything which seems to solve this problem. Is the problem with the change in windows Vista environments to Windows 7 (on Dell Alienware i7) or I have to buy another sound card, or is it Premiere Pro CS3 here the rub? Thank you, eirrom.

    Yes, quite probably a compatibility issue. CS3 used an older model of compatibility, which long has been surpassed by newer versions of DX. However, still does backward compatible, so the problems you might have may depend on requiriung a specific driver, installing the legacy DirectX or as a minor, full support by changing some permissions on the system to allow the loading of drivers unsigned legacy and compatibility modes. It's a problem more complex that simply flipping a switch eitrher average. Check your device manager and then work your way through...

    Mylenium

  • audio files do not play sound after the restoration of the links

    I recently moved to a project from one disk to another.

    When I opened it the project folder I had to recreate a link to all the media which seemed to have a lot of success. However the audio files do not seem to play any sound. When I tell one of the audio files in the finder window, it take me for an alias file. When I try to open this file, it indicates that the original file cannot be found.

    I tried to remove the entire library of files sound and re-import them back in. But still, it does not solve this ridiculous issue.

    Any suggestions?

    Thank you

    Karl

    Are music protected audio files?

    Russ

  • Satellite Pro P300-1AY: Vista does not display computers XP network group

    On my show w Satellite Pro P300-1AY with Vista, my old XP computer is not always displayed in the list of working groups.
    On my old XP computer, I still see the new Vista computer

    Can you tell me why the Vista computer not always displays the XP computer in the network group?

    On the commputer of Vista, I traced a directory on the XP computer and it will connect even though the task force list does not show the XP computer under the list of networks

    Hello!

    Have you disabled the firewall on the XP computer?
    Maybe a 3rd party security software is blocking it.

    Check the registry and go to:
    HKEY_LOCAL_MACHINE es\lanmanserver\parameters
    In this case don't Scream no entry with the name of Hide.
    If you have such an entry, delete it.

    Good bye

  • Satellite X 200-252: audio driver does not work on Win XP SP3

    Hello

    My audio drivers do not work correctly on Windows XP SP3. I have five speakers in my book of X 200-252 of the Satellite, but only two are detected by the operating system. When running on Windows VIsta, that there is no problem.

    I downloaded the XP audio drivers on the Toshiba site so they must be up-to-date.

    If you know how to solve this problem, I would be grateful for any advice.

    The man you want to install ok your sound, while u use sp3 from beginning.
    Install XpSp2, then install kb888111 and drivers for your audio high definition!
    It worked perfectly for me!
    I had the same problem.
    Good luck.

  • Equium A100: Audio driver does not not WinXP

    Hi, when I bought my laptop I had Vista installed on it, I installed win XP, but I had no drivers, but I downloaded Toshiba & Utilities CD tools that have all the drivers for my lapop, everything works well only realtek audio driver does not work correctly when I restart my pc error appears, I made the screenshot of it it maybe you can help me with this problem.

    Here is the link to see srceenshot: http://rstheclan.googlepages.com/error.JPG

    Have you installed the two KBs (knowledge base) of Microsoft before running the installation program driver sound?

    You can try and download the audio drivers manually and give it a reinstall. Not to mention that this error message, play sound in Windows?
    Need drivers, you can find here: http://eu.computers.toshiba-europe.com (Support & downloads)

    Another question. What Service Pack you are using? Always SP2 or SP3 brand new? With the last of them, there are sometimes problems with the realtek sound card drivers.

  • Satellite L300-19F and WXP - audio device does not work

    Hello

    I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

    BTW: he used to work on Vista.
    What should I do?
    And thank you

    -Download driver audio Realtek HD Realtek page.
    -Go to the Device Manager
    -Remove the sound card.
    -Remove the High definition Audio Controller
    -Restart the laptop.
    -Reinstall the Realtek HD audio driver

  • HP Pavilion Notebook PC g7 - The Audio Service is not running

    I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

    HP Pavilion Notebook PC g7

    #ABA product number A6Z29UA

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 7.

    Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • My internal Microphone table (IDT High Definition Audio Codec) does not work

    Hello

    My internal Microphone table (IDT High Definition Audio Codec) does not work.

    I can't make calls from Skype.

    I've tried everything, but I'm still not able to solve the problem.

    Could you please advice me what to do?

    Could you please provide me with a link with the drivers, I might need to reinstall.

    My computer is Windos 8.1, HP, Intel i - 7 CPU, 64-bit operating system.

    I would really appreciate your quick response to solve this problem.

    Thank you very much

    Antonio

    Hey,.

    Try installing this driver: driver Audio IDT high definition (HD)

    If this fails, try to use the HP Recovery Manager to roll back the driver installed in the factory.

    After the two tests. I would like to know if the option worked.

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

Maybe you are looking for

  • Qosmio all-in One PX30t - I need change before touch digitaliseur glass

    Dear Sir I have everything in a model of pc PX30t / part No.6D140058Q I need change before Touch Digitizer glass as it is broken How can you me how I can buy one and what s cost? Much thanks. Abdulla AlmahmiedDoha - Qatar

  • Qosmio X 300 overheating fixed

    Hello I m announcement for all people having problem with the overheating problem Qosmio. The only way to solve the problem is to buy this (cooler) fan only: AB7505HX-S03 and add it to your laptop. Sinice I did this is that perfect, I played Crysis 2

  • HP Envy X 360 laptop USB 3.0 transfer speeds

    Hello.  I have envy of HP X 360 with an Intel i5 in it. I also bought a Seagate USB 3.0 portable hard drive. I only get speeds between 20-30 MB/s between them. Why? And Yes, the drive is plugged into one of the two USB 3.0 ports.

  • Often lose pix or graphics when sending e-mail. How can I fix it?

    What Redirection with pix or graphic email, notification that "some pix can not send."  What can I do to avoid this problem?

  • 2 questions: win8 license & replace the AC adapter / CC

    Hello. I have an acer V5-552 G-X 414 and I replaced win8 with win7 and I want togo to return. There is no sticker on the back for windows serial. Where can I get it back? Also, I've lost the adapter a/c and im trying to buy a replacement. Does anyone