Audio waveforms extended but not visible.

Similar Questions

• Recognized SD card but not visible

  When I insert an SD card into the reader, the card is recognized, but not visible in Windows Explorer or another program. In the hardware menu information, the SD card reader works properly.

  No idea how to solve this problem?

  Kind regards

  Jack

  What cell phone do you have?
  What SD card do you use the SD card reader?

  Look in your user manual if your SD card will be supported and check from Toshiba Web site for an update of the BIOS.

• HP Envy 15 x 360: Audio, sound recording, but not releasing any

  Went to this for an hour and I tried all the previous solutions. I've updated, uninstalled/reinstalled, restart the computer, shoot bad, etc., but nothing seems to solve my audio. It is not a problem with the headphones as with or without them audio does not work. I think it's a problem with the speakers, but not quite sure.

  Product name: HP ENVY 15 x 360 PC
  Product number: J0E41AV
  Serial number: [personal information deleted]
  BIOS (Configuration):F.24-11/28/2014 (0978100000405F00000420180)
  Keyboard Review: 89.22
  Total memory: 8.00 GB
  Name:Intel (R) Core i5-4210U CPU @ 1.70 GHz processor

  Hi @mnma88 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your computer laptop HP ENVY 15 x 360 and questions with no sound. Here's a documenton troubleshooting sounds if you need it.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Please let me know how it goes.

  Thank you.

• Officejey 8620e Pro: Officejet Pro 8620 connect wireless but not visible by any other device of

  Printer was fine for 9 months.  That is, Apple devices could print using AirPrint.  Computers laptops MacBook Pro and Windows 8 were also very good.  But now printer is not visible by any device when trying to print / set up a printer.  Finally managed to do work with a USB cable, but it's not practical for all members of the family.  Have you tried:

  Full power reset

  Reset wifi

  Updated drivers

  Recycled all devices that are used to be able to see the printer.

  To confirm, the printer says that it is connected to the wifi & AirPrint and wakes up when the control panel is touched.

  Thanks in advance

  Hello @Insightful_Chap! I'd love to help you with your Pro Officejet 8620.

  I understand your description that the printer is connected to your network, but is no longer visible for your devices. Although the printer is connected, I would allows you to use the following document to solve the problem as it will guide you through the necessary steps: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection.

  Please let me know the results of your efforts and we can go from there.

• The pods are open but not visible?

  I opened the project and moving pods (head of project, project Set Up, etc.), but seem to have their top and now they are not visible on the screen.  I tried to close the project and re-opneing it... hoping the pods would return to the display by default but have no luck.

  Hello

  Try clicking on File > Load Default environment (RoboHelp 7)

  or file > environment > load default environment (RoboHelp 8)

  See you soon... Rick

  Start learning HTML RoboHelp 7 days - $24.95! Click here for Adobe Certified Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Watercolor Wizard installed CC PS in 2014 but not visible in the window > Extensions

  I installed this add-on to Photoshop. It is not visible in Photoshop > window > Extensions, even if the designer Cloud Desktop app and Adobe Extension Manager CC report it as installed.

  I think that it works with Photoshop before they took the Flash, so PS CC and not CC 2014.

• iTunes is running but not visible in Windows 10 icon

  iTunes works fine, but the window does not appear. When I run iTunes, I don't see anything. The task manager says it is running, but it does not appear in the taskbar. Do you think that there is a way to make the iTunes icon visible on the taskbar and display the iTunes window?

  I recommend that you get in touch with Apple customer, because they are the company that makes iTunes.

• "Bus Audio HDA required but not found" - need help

  I upgraded my motherboard a while ago and it was working fine, but now it has malfunctioned and I sent it get checked and replaced (still in warranty)

  I had to go back to my old temporarilly motherboard and as such I don't have driver disks, most work but my audio drivers do not work. I tried to get drivers on the motherboard (Lenovo) site and I downloaded who he says that I needed, but every time I try to install it I get the message of the title bar. I googled the problem and found a few places that suggested they had a fix for it, but they did not work. Is it possible that it does not work because I don't have Hi-Def audio and that's what he's looking for?

  Hello

  I suggest you access the link below: http://support.microsoft.com/kb/2519434

  Also, install updated audio driver on the manufacturer's Web site, you can check the link for the steps below: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• How to prepare the folio for prior approval from Apple, but not visible on Android?

  Quite possible I just forget something, but it doesn't make sense to me. We have already active application in the App Store and the Google game, with a lot of questions for sale. Now we must prepare a special issue, which will go on sale next week or something like that. So I want to prepare the purchase app for prior approval. Now, we do not have full Folio, just one with a dummy cover.

  Workflow according to the guidelines of the guide to publication is:

  -make public and retail folio

  -submit the purchase app from Apple

  - and wait.

  I did it.

  OK, but what about Android? I even created in-app purchase in google play, set the correct product ID and set as unique, but I still see this dummy folio on Android. I can't buy it, but I see it, and it's not good.

  So how to solve this problem?

  
  Thanks for the quick help!

  Martin, I've confirmed this with a tester. He said, 'on Android (Google Play), the customer will see all public folios because Google does not provide an API to check what is available for purchase on their servers. On Amazon AppStore applications, the folio must not be visible. »

• Printer has been installed but not visible

  Hey friends...

  I have Windows XP SP2 and network using SHARP MX-3100 printer, many other times I have installed the printer,but I could not see the icon of the printer anywhere and in any other document, I'm confused about where to find this printer. Before a few times I had no problems like this. And now I'm on printer canon also network. I have no problem in that. If someone familiar give me ideas please

  SCI

  Hi Mohammed,.

  Make sure the physical connection to the printer is correct.

  You can also follow the steps in the link below: Advanced Troubleshooting for network printing problems in Windows XP:http://support.microsoft.com/kb/314073

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Disk hard online, but not visible in Windows Explorer

  Hi guys, I need a little help.

  Today, I installed an old 80 GB Maxtor Diamondmax 10 PATA hard drive on my other PC, a Dell Inspiron 530, as a second HDD. I had to order new parts to connect actually upward from the power supply and motherboard SATA and IDE connections are not, but all those who are working very well.

  My problem is that this Maxtor drive does not appear in Windows Explorer. BIOS, see Device Manager it disk management he sees (and even said it's online). Just not Windows Explorer.

  In disk management, it is not a drive letter assigned to it, and when I right click on the disk partitions, anything but 'Delete the Volume' and 'Help' are grayed out. (Screenshot here: http://i39.tinypic.com/2ujpbeo.png)

  I'm a bit stumped, it's almost like I can't use the drive at all. Any ideas?

  Here's some more information about the system:

  OS: Windows Vista editions Home Premium (Build 6002, Service Pack 2)

  BIOS: Phoenix AwardBIOS review 1.0.18

  Motherboard: Foxconn G33M02

  CPU: Intel Pentium Dual-Core E2140 1.6gHz

  Memory: 3072 MB DDR2 SDRAM

  First HARD drive: 250 GB Hitachi SATA sister

  HARD drive secondary: 80 GB Maxtor Diamondmax 10 PATA (with jumper set to "Master DS")

  GPU: ASUS EAH4670

  And I should add, just in case... This is PATA to SATA card, I use the drive: http://www.ebay.co.uk/itm/320759737706?ssPageName=STRK:MEWNX:IT & _trksid = p3984.m1439.l2649

  And I just use a SATA to Molex cable I found to convert the power.

  Thank you

  Hello

  Thanks for this info. I looked more into filesystems and it turns out that the disc was either FAT or NTFS - it was EXT2 which is a Linux file system. I found this by starting Ubuntu that supports multiple file systems.

  I didn't format it had data on personal, but I found an EXT2 driver and can now browse the Windows hard disk.

• Saved form data is there but not visible without clicking on the field?

  I created a PDF form, I've done it is possible to save the form with the data entered so that the customer can fill out and email me back filled form. When I got back, the information was there, but I had to click on each field to see what he says. And another strange thing, the preview of the file in my mac mail e-mail has filled fields and showing. It appears on 3 computers in my Office I know its not just mine. It does not print with the data included. Any suggestions?

  She was probably saved with the application on the Mac, as opposed to Adobe Reader or Acrobat. Overview really sucks for PDF forms and is actually evil because it causes all kinds of damage. You are watching only one aspect of it. For more information, including some things that you can do to reverse some of the damage, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

• Parts white fonts when printing / export but not visible in Photoshop

  Hello

  I work on our wedding invitations and ran into a few misprints.

  Everything looks OK in Photoshop (CMYK, color presets used from the print service, etc.) but once exported in PDF format / or printed, the 'partially white police' - problem occurs. (see attached screenshot)

  It is therefore all two visible in the exported PDF document or printed (directly from Photoshop).

  I first thought that it had something to do with the police (Angelina), but occurs with other policies as well. I noticed when you select some text in Photoshop, the 'white' pieces are parts of fonts that are outside of the selected text (whereas in fact text is selected, ready for editing). So it is perhaps a clue...

  If I reduce the font size to more than half the size, the question is no longer there.

  

  Move it to the top most layer and try again... or send me the file... easier...

  G

• Myriad Pro Light usable in Photoshop, but not visible in the font book.

  I can't locate a font. We have recently upgraded to CS5 and one of our designers needed a font I used in a previous file. I saved the Myriad family are doing to him, but 'Light' was absent from the family in fontbook, even if I am able to use it in Photoshop and Adobe programs. When he opens my files, however, he received a warning from the police saying that he isn't Myriad Pro light. My question is, why I am able to use it even if it is not in Fontbook, could it be stored somewhere else?

  
  

  It's just a text file containing the information cached on the fonts.

  If you are able to see the police in other Adobe applications, then try this:

  1. launch InDesign

  2. create a new document

  3. create a text block

  4. type text

  5. Select the text and apply the police

  6. go to the menu Type and click find a police...

  7 select the font in the list fonts in the Document

  8. click on the more info button

  A named Info box. You will find the path to the font file.

• Application installs the device but not visible

  Hey there everyone,

  I have a small application that uses GPS and connects to a server using HTTP. When you are testing in Eclipse with the emulator, everything works perfectly. However what over-the-air installation of the Unit indicates that application installed successfully, but another, under Options > Advanced Options > Applications, I can't find the app anywhere. Also, I can't delete the app from the phone.

  I then tried to make a more installation of air using the emulator and then saw that during the installation, I get an IllegalArgumentException followed by a NullPointerException followed, successfully installed. No idea what could be the cause of the difference? No idea how one can go about fixing this problem?

  Kind regards

  Schalk

  JAD file problem prevented editing app of correctly.