Audio will play not except from the beginning

Similar Questions

• Audio only plays when started from the beginning?

  Hello! I'm pretty new to Flash, I consider myself a beginner, but recently I've been commissioned to do an animation for someone! There is a song played in the animation, it is a wav and it is on its own layer. There are also drawings that I imported in too.

  My problem is, I want to be able to synchronize the little drawings for the lyrics of the song, but the sound does not play when I starts at 0 on the timeline. If I had to start we are going to say plot of 24, it will not play. Does anyone know how to fix this? This commission must be completed by Wednesday and it's a process S L O W, duty again only to hear as one or two words later

  Change the property to sync (in the properties panel after you click the keyframe where starts your sound) of the workflow event.  Repeat the test.

• My computer does not load from the beginning to need help

  I have a footstool of G62-224HE model HP laptop Windows 7-64 bit OS, before my broken laptop I downloaded my regular system updates when I rebooted my computer to finish my updates, it got stuck in a loop from loading until you see the logo windows and return to the beginging , so I did a Test drive and it kept failing the system repair lights forever and load dosen't system restore. What can I do?

  Thanks, I'll buy a new hard drive, which causes a malfunction of the hard drive? Is it possible to extend the life of a hard drive?

• No audio with videos not transferred from the phone on PC

  My son, I use my phone to video with all its "firsts". (He is 15 months old) I recorded his first steps, dance to the songs, etc. on my phone and you want to share with others! However, when I transfer my videos to my computer using the options of sharing or transfer, I have no sound on the computer! I have Windows 7, but I also tried on my mother's computer and she is running XP. Neither worked, so I have no sound. I don't know how to solve this problem.

  Well, you can use a program that already has the support of 3gp videos, or use a codec like this Setup program to install just the 3gp codec.

  I know that Quicktime supports 3gp integrated, so it should work as well.

• RAM Preview does not play from the beginning

  Anyone run into this.  When I RAM Preview, it does not start video playback up to about 1 second at first.  When loops overview it plays from the beginning, problem is only with the first reading.  Annoying to say the least.

  There is a bug in Mac OS x v10.10 (Yosemite):

  After Effects Mac OSX v10.10 (Yosemite)

• audio is launched from the beginning of the song little matter where I click in the movie timeline to start playing?

  I need the audio to help the photo calendar synchronization. However, no matter where I start playback to check a second time when a certain image, audio ALWAYS starts again from the beginning of the song! How can I stop this?

  Since you have posted in a forum XP... I'm guessing that you're
  using Movie Maker 2.1?

  If you drag the playback indicator (vertical line with square
  at the top... Rest the pointer on the square and drag)...
  the music should start playuing.

  Unlike the video track... you can click left/make dragging clips
  the audio left and right. And you can change the
  duration of a single photo on the timeline manually. Move
  your pointer autour in border of an element until you see a
  double red arrow. Now drag the double red arrow... you'll
  display a ToolTip that shows the evolution of life.

  Articles that offer information about audio sync with the video

  "Collections of projects".
  http://www.Papajohn.org/newsletters/024-Collections.html

  Study the rendering of DV - AVI files
  http://www.Papajohn.org/newsletters/048-StudyDV.html

  Editing film 'Basics '.
  http://www.Papajohn.org/newsletters/139-EditingBasics.html

• Music / sound plays from the beginning

  I'm starting a new Flash animation (I've not used the Flash in a few months, but it says it is updated), and for some reason, I've added music, will only play if I start from the beginning of the timeline. If I start from anywhere in the middle of the timeline, after the departure, the sound is not reading at all. What is going on? Can it be fixed?

  What you describe would be the case if you have defined a test of properties. Change that to the stream.

• How to make sure the Animation still plays from the beginning

  Hi guys,.

  I'm working on a project to facilitate dashboard which consists of 3 animations. I have a problem when I navigate between each symbol, without allowing that each completed in full animation. Rather than play as they should, from the beginning of each animation, animation simply continues to play from the position as was the timeline when I navigated away to another symbol.

  
  

  Is it possible that I can reset the symbol in its original position, when I trigger another animation to make sure that each animation always time from the beginning?

  Has anyone else had a similar problem? Any help will be much appreciated as always.

  Thank you very much

  
  Ross

  All included now - it works, and you do not have the script fixed correctly.

  The only thing I noticed is the placement of you reading action, see capture.

  I didn't move a bit. And by that I mean set it so that the beginning of the fall of play icon AFTER the reading, the alignment exactly where the label of separation begins - see figure.

  In your case it was not aligned correctly. I also changed the read option play to play to 0:00.

  HTH

  Darrell

• So why make a movie in movie maker, the only way to get the song to play with the photos in sequence is in play from the beginning?

  I am trying to edit photos to last for some parts of the songs (fade in and out where I want to that they), but the only way to see what the photos of 'falling' in the song by playing the song from the beginning. Every time. It won't let me go to a certain section of the timeline and play both the photo and the song at that time here (it takes me to the photo, but he began to play the song in some random place)?

  Thank you very much!! =)

  Hello

  Once you have added music, go to the Options tab. Now click on Split (in fact the split music) you should see the music bar along the top of the film split.

   

  Audio setting in Windows Movie Maker: frequently asked questions (valid also for Windows XP)

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  See also: http://windows.microsoft.com/en-US/windows-xp/help/movie-maker/faq

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone.

  iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone. Male/female connection not relieve tight. Advice\help would be appreciated.

  Try a different cable - preferably a certified one MFI

  If this does not work

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• MY iphone6 will not return from the icloud, HELP?

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Weezy616 wrote:

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Thanks a lot for sharing that you cannot restore icloud.

  Maybe include some details as to what happens when your restore IE. error message?

  Or that said Apple store has been without success...

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• Game sounds from the beginning to the place where I am in the timeline panel

  I am currently lipsync animation. I have the sound flow value instead of the event, but for some reason any (often, but not always) when I play the part of the sound, no matter where I am on the timeline, the sound is played from the beginning as if I started at the beginning of the melody. I tried to split the file between each syllable, and that seems to have fixed, but now there is a strange noise that plays to each division, so that the method is not really practical.

  I have a feeling that this may be a RAM issue since it seems to have no known cause and nothing seems to fix it for sure. It seems like something that would be caused by the release of maxing out the RAM. I have 6 GB and I thought that would be enough, but it may not be. There isn't really a lot going on in this animation that could bring it to use this amount of RAM, but after reading about how it works the Stream parameter, looks like a cumbersome process RAM.

  What do you think guys? It's something I've missed, or it's just my RAM and I'll have to deal with it, unless I get more?

  Update: I checked my task during execution of the animation Manager, and it goes up to 60% at the most. I'm puzzled.

  It is a known problem that can occur in Windows. It's already been fixed, but I don't know when the update will be available. 'Early 2016' is say Adobe.