Audit of permissions is caused a late start the Application

Hello

In my application, I register the Application with HttpFilter registry. So if I open a particular link, I go to the browser and back again to the application. Now, to do this, I created an entry point. And I take some permissions. Now the question is, I write permission in the Main method of the Application. So every time it is check approval and launch the application. So, there are a few seconds(5-6) delay in the launch of the application. Here is the code for the permissions:

 /** @return true if the user has accepted permissions requests */
    public static boolean hasPermissions() {
       ApplicationPermissionsManager apm = ApplicationPermissionsManager.getInstance();
       ApplicationPermissions original = apm.getApplicationPermissions();

       if(original.getPermission(ApplicationPermissions.PERMISSION_BROWSER_FILTER) == ApplicationPermissions.VALUE_ALLOW)
       {
          return true;
       } else {
          return false;
       }
    }

    /** @return true if the user has accepted / granted permissions */
    public static boolean checkPermissions() {
       if (!hasPermissions()) {
          ApplicationPermissions permRequest = new ApplicationPermissions();
          permRequest.addPermission(ApplicationPermissions.PERMISSION_BROWSER_FILTER);
          return ApplicationPermissionsManager.getInstance().invokePermissionsRequest(permRequest);
       } else {
          return true;
       }
    }

And here I check in the main method:

public static void main(String args[])
    {
        if(checkPermissions());
        {
            try {
                if((args != null) && (args.length > 0) && (args[0].equals("background")))
                {

                    Logger.out("AppLaunch", "in the alternate entry point");
                    HttpFilterRegistry.registerFilter("URL", "packagename");
                }
                else if(args != null)
                {
                    Logger.out("AppLaunch", "Inside the Applaunch");
                    theApp = new ArcotOtpApp();
                    Logger.out("AppLaunch", "created the app launch object");
                    theApp.enterEventDispatcher();
                }
            } catch (Exception e) {
                // TODO Auto-generated catch block
                Logger.out("AppLaunch", "Exception::::::11111111" +e);
            }
        }

    }

Can you please tell me where I am doing wrong or what is the right way so that the time will not be there.

Thank you very much Peter. I check out on your way. It was not the issue of the authorization. There was another object instantiations are pass while going to the main screen. Which are at the origin of the slower launch.

Thanks again.

And can you help me on this question too: http://supportforums.blackberry.com/t5/Java-Development/Active-RichText-Field-Hyperlink-issue/td-p/2...

Tags: BlackBerry Developers

Similar Questions

Registration_Suppress causes loop of starting the application Acrobat Pro 11.0.07

Hey guys,.
Running in a strange question, I do not know if someone is met. With earlier versions of Acrobat Pro XI, I could use the Adobe Customization Wizard to create a transform, which provides the settings I want to deploy. Within these parameters is also a switch that allows you to delete the recording window, as in a corporate environment, it can be a bit annoying to have end users deal with registration.
With the release of 11.0.07, I tried to simply apply the custom transformation previous installation base, but after installation, when you try to run Acrobat, PDapp.exe will simply loop free Acrobat open actually. I thought originally that it might have to deal with licenses, as our volume license was in the phase of renewal, but after the renewal, and when you run a standard interactive installation, Acrobat installs fine, although it invites registration. Also, trying to ignore the record, the record simply closed window then opens again.
I was able to change my habits turn then REGISTRATION_SUPPRESS = NO is defined, which allows to get Acrobat to install it correctly, and, if the user submits an Adobe ID, allows Acrobat execute successfully. However, it would be nice if it would be possible to simply delete the registration window, or, perhaps, to provide information on registration through the transformation so that it appears to the end user.
Suggestions?

First of all, there are a lot of mistakes in any of these log files. A lot of questions that can occur here:

------------------------------------------------------------------------------------------ -------------------

---------------------------------------

Acrobat Pro Log

Line #35105

[BlockingProduct]

Property (S): ERROR_PRO_OVER_BASE_ABORT = the Setup program requires that you uninstall [BlockingProduct] before you proceed with this installation, in order to avoid any conflict of application. Please follow these steps:

(1) cancel this Setup program

(2) go to the Panel "Add/Remove Programs", located at

Start: Settings: Control Panel

3) highlight the product [BlockingProduct]

then click on remove

(4) Re-run this installation program

Line #35169

Property (S): ERROR_CANNOT_OPTIMIZE_DISK = NOTE: Installation succeeded. However, because your hard drive is fragmented, this request may not be able to launch as soon as possible.

For best performance, if please defragment your hard drive and then fix this application in Add / Remove programs in Control Panel.

Line #35266

Property (S): UnsupportedOS_DotNet = installation of [brand] on a Windows 64-bit operating system requires that you first install the package according to the address below:

-Package: Microsoft .NET framework 2.0 x 64

-Card: http://www.microsoft.com/downloads/details.aspx?FamilyID=

b44a0000-acf8-4fa1-affb-40e78d788b00 & displaylang = en

------------------------------------------------------------------------------------------ -------------------

------------------------------------------------------------------------------------------ -------------------

Patch log

Line #53

MSI (s) (C0:B0) [13:31:17:880]: looking for the transformation of patch: TGT_03ToUPG_03

DEBUG: Error 2746: transform TGT_03ToUPG_03 invalid for package C:\WINDOWS\Installer\12566a4.msi. Product expected {AC76BA86-1033-FFFF-BA7E-000000000006}, found product {AC76BA86-1033-FFFF-7760-000000000006}.

Line #15500

MSI (s) (C0! 78) [13:31:31:873]: PROPERTY CHANGE: adding DefragmentFiles property. Its value is ' IMM_SUCCESS; C:\Program Files (x 86) \Adobe\Acrobat 11.0\; Software\Adobe\Adobe Acrobat\; 3; optimizing performance...; Completed [1] % of the process; NOTE: The Installation was successful. However, because your hard drive is fragmented, this request may not be able to launch as soon as possible.

For best performance, if please defragment your hard drive and then fix this application in Add / Remove programs in Control Panel.

Please see the Readme file installed in your folder of programs for more information. ; | ACR|\Acrobat.exe;|ACR|\ace.dll;|ACR|\Acrobat.dll;|ACR|\agm.dll;|ACR|\bib. DL l;|acr|\cooltype.dll;|acr|\plug_ins\accessibility.api;|acr|\plug_ins\acroform.api;|acr|\pl ug_ins\annots.api;|acr|\plug_ins\catalog.api;|acr|\plug_ins\checkers.api;|acr|\plug_ins\di gsig.api;|acr|\plug_ins\distillerpi.api;|acr|\plug_ins\dva.api;|acr|\plug_ins\escript.api; |acr|\plug_ins\html2pdf.api;|acr|\plug_ins\ia32.api;|acr|\plug_ins\imageconversion.api;|ac r|\plug_ins\makeaccessible.api;|acr|\plug_in

DefragmentFiles_InitProgress: Property MSI DefragmentFiles: IMM_SUCCESS; C:\Program Files (x 86) \Adobe\Acrobat 11.0\; Software\Adobe\Adobe Acrobat\; 3; optimizing performance...; Completed [1] % of the process; NOTE: The Installation was successful. However, because your hard drive is fragmented, this request may not be able to launch as soon as possible.

For best performance, if please defragment your hard drive and then fix this application in Add / Remove programs in Control Panel.

Please see the Readme file installed in your folder of programs for more information. ; | ACR|\Acrobat.exe;|ACR|\ace.dll;|ACR|\Acrobat.dll;|ACR|\agm.dll;|ACR|\bib. DL l;|acr|\cooltype.dll;|acr|\plug_ins\accessibility.api;|acr|\plug_ins\acroform.api;|acr|\pl ug_ins\annots.api;|acr|\plug_ins\catalog.api;|acr|\plug_ins\checkers.api;|acr|\plug_ins\di gsig.api;|acr|\plug_ins\distillerpi.api;|acr|\plug_ins\dva.api;|acr|\plug_ins\escript.api; |acr|\plug_ins\html2pdf.api;|acr|\plug_ins\ia32.api;|acr|\plug_ins\imageconversion.api;|ac r|\plug_ins\makeaccessible.api;|acr|\plug_ins\multimedia.api;|acr|\plug_ins\papercapture.a pi; ACR | \plug_ins\ pddom. API; | ACR | \plug_ins\saveasrtf. API; | ACR | \plug_ins\saveasxml. API; | ACR |\plug_ins\search.api;|acr|\plug_ins\sendmail.api;|acr|\plug_ins\spelling.api;|acr|\plug_i ns\touchup.api;|acr|\plug_ins\updater.api;|acr|\plug_ins\weblink.api;|acr|\plug_ins\webpdf.api;|acr|\plug_ins\ReadOutloud.api;|acr|\plug_ins\ppklite.api;|acr|\plug_ins\preflight.ap i;|acr|\plug_ins\reflow.api;|acr|\plug_ins\XPS2PDF.api;|acr|\plug_ins\Scan.api;|acr|\plug_ ins\eBook.api; 68680375

DefragmentFiles_InitProgress: Put an end to immediate custom action

CustomAction DefragmentFiles_InitProgress returned the 1603 error code but will result in successful due continue marking

Line 43381 #.

[BlockingProduct]

Property (S): ERROR_PRO_OVER_BASE_ABORT = the Setup program requires that you uninstall [BlockingProduct] before you proceed with this installation, in order to avoid any conflict of application. Please follow these steps:

(1) cancel this Setup program

(2) go to the Panel "Add/Remove Programs", located at

Start: Settings: Control Panel

3) highlight the product [BlockingProduct]

then click on remove

(4) Re-run this installation program

Property (S): ERROR_OLDER_OVER_NEWER = Setup has detected that you already have a more functional product installed. The installation program will end now.

Line #43542

Property (S): UnsupportedOS_DotNet = installation of [brand] on a Windows 64-bit operating system requires that you first install the package according to the address below:

-Package: Microsoft .NET framework 2.0 x 64

-Card: http://www.microsoft.com/downloads/details.aspx?FamilyID=

b44a0000-acf8-4fa1-affb-40e78d788b00 & displaylang = en

------------------------------------------------------------------------------------------ -------------------

------------------------------------------------------------------------------------------ -------------------

Journal of PDApp

Line n ° 60

14:16:21:020 07/24/14 | [INFO] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | Build Version - 8.0.0.22

14:16:21:020 07/24/14 | [INFO] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | Exploitation forest verbosity level set to 4

14:16:21:020 07/24/14 | [INFO] | | USS | AAMUpdatesNotifier | Public services | | | 1876 | File "C:\Program Files (x 86) \Common ' does not exist

14:16:30:393 07/24/14 | [ERROR] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | Error occurred during initialization of updater. Error code: 23

14:16:30:393 07/24/14 | [INFO] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | inside getUpdates

14:16:30:689 07/24/14 | [FATAL] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | Error in Updater core in Terminate

14:16:30:689 07/24/14 | [ERROR] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | Error occurred during initialization of updater. Error code: 23

14:16:30:689 07/24/14 | [INFO] | | USS | AAMUpdatesNotifier | AAMUpdatesNotifier | | | 1876 | WaitFor event Thread to get out...

------------------------------------------------------------------------------------------ -------------------

------------------------------------------------------------------------------------------ -------------------

OOBELib.log

It is a mistake after another throughout the record. It's as if it was a mistake running.

------------------------------------------------------------------------------------------ -------------------

------------------------------------------------------------------------------------------ -------------------

You can defragment your hard drive because there are errors in the installation it but there are too many errors of too many things.

You must contact Adobe on this one.

I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium. I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them. The test seems to be hanging around 21% so I don't know how well it will do

Hi A1W1LL,

A clean boot helps eliminate software conflicts. Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

To perform the clean boot procedure, follow the instructions in the link below.

Step 1: Perform a clean boot
Step 2: Enable half the services
Step 3: Determine whether the problem returns
Step 4: Enable half of the startup items
Step 5: Determine whether the problem returns
Step 6: Resolve the problem
Step 7: Reset the computer to start as usual

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135

After reviewing the issue, put the computer into Normal mode.
Uninstall or update the program that is causing the problem.

If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press any key when the message "Press any key to boot from CD or DVD".
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. click on repair your computer.
5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
6. in the System Recovery Options dialog box, click System Restore.
7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
8. click Finish to restore the system.

Please post back and let us know if it helped to solve your problem.

Kind regards
KarthiK TP

BTTray.exe, error to start the Application.

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:BTTray.exe, error to start the Application.
- Programs that you have problems with the Bluetooth does not work overwhelming
- BTTray.exe, Application error messages start error.
- Recent changes made to your computer: just updated to windows update
- What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft
Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

Are you still using the BTTray? If this isn't the case, we can solve the problem in a more easy way.

Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all. Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start. Check the entire list as there may be several entries. When you're done, click OK and restart. The message should be gone.

If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Cannot start the application - error code 8

I'm running one of my own apps and I get this message:

"Cannot start the application - error code 8.

What is the error code 8? Where can I find a list of all error codes?

Thanks in advance

If you get error 8 or 13, and that everything you did is OK for this:

-Uninstall all versions of your application

-Restart the playbook

-Install and run again

Cannot start the application... Error code 13

I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

Thank you

I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

BlackBerry Smartphones BlackBerry Maps is loaded on the NEW Bold 9700, but there is no icon to start the application

You just bought a new Bold 9700. I ran all of possible update. BlackBerry Maps IS loaded (v5.0.0). The operating system is the most recent. I see BlackBerry Maps in applications of the add-on, but there is no icon to start the application. The seller is completely useless when it comes to helping solve the problem. The GPS seems to work and provides the correct location data, but I can't find a way to start the BlackBerry Maps application. What gives?

GPS still works on the device, even without BlackBerry Maps.

Try Google maps. Free.

Start the application at startup of Windows 8

Hi all

I'm launching my application on Windows 8 at startup. I tried the Task Scheduler. My concern is that, with Task Scheduler, the application begins only after the desktop appears. My intention is to start the application at startup without having to navigate the desktop.

Any help is appreciated.

Thank you

Narayanan K

Task Scheduler will launch an application, even if you do not visit the office.

Or, you can just put a shortcut in your startup folder icon.

Press +R to display the run box, type : startup of the shell and put any icon. It will run when you connect.

What configuration is required to start the application of P6, if deployed manually in weblogic?

Hello
I had faced a number of question time but did not have a solution yet.
If I create the weblogic domain and deploy p6 web application manually and start the application, it becomes active.
But when I tried to open it dosen't work. (I had faced this a lot of time problem)
If I deploy the web application to p6 P6 itself create the new domain weblogic or existing user, installing it deployed and works perfectly well.
I think that if we deploy P6 manually, you must configure something in weblogic.
Can you please help.

You can see the configuration guide for P6 EPPM manual for appropriate versions. Link below is 8.3. This will tell you the requirements for manual deployment.

http://docs.Oracle.com/CD/E40266_01/English/Install_and_Config/Admin_PDF_Library/p6_and_weblogic_config_guide.PDF

Thank you
Sachin Gupta

Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

Follow these steps, Editor does not start | Mac App Store version

starts the application server
Hello
in tools 8.52 in 2008, in which file should I register the domain name to start the application server automatically restart when?
He was psntsrv.cfg in PS_HOME/appserv 8.49.
Thank you.
start the PSADMIN and choose the option
(6) Service configuration
and then
(1) configure Windows Service
Provide the name of CRP, the appserver you want to start automatically as a service

In the Administration of PeopleSoft Services menu option
(2) install the Windows Service
This will create a new service, in my case
PeopleSoft_C__apps_psoft_config

Kind regards

Halin

question on "How to call a method once when starting the application"
Hello everyone.

I'm trying to implement that article "How to call a method once when you start the application" by Frank suggests.
https://blogs.Oracle.com/jdevotnharvest/entry/how_to_invoke_a_method

Suppose I want to have a single entry point, so in my login.jpsx I have the below:
```
<f:view beforePhase="#{login.onBeforePhase}">
```
In the 'onBeforePhase' method, I have to pass the phaseEvent, since the signature is as follows:
```
public void onBeforePhase(PhaseEvent phaseEvent)
```
But how do I know the phaseEvent during the call to the login.onBeforePhase? How the call should be?

Thank you very much!

PS. I use jDev 11.1.2.1.0
You must not pass something to this method, this method is called before each Phase except view restoration
Just write logic as Frank suggested to the phase in which you want the code to run. You can get the PhaseId analogues

PhaseId.RENDER_RESPONSE
```
public void onBeforePhase(PhaseEvent phaseEvent) {// from Frank's doc
 //render response is called on an initial page request
  if(phaseEvent.getPhaseId() == PhaseId.RENDER_RESPONSE){
... etc
```

Issue by starting the application server.
I installed Tux 8.1 under windows 2003 on PT 8.48.16.

Whenver I'm trying to start the application server I m getting the error message below.

I had tried all the possible solution given on the support site, but no luck.

Beside that, I also get a pop-up images that say ' an unhandeled win32 exception occurred in tmadmin.exe [3004]. "

Can you please give advice about this.

==========
Error: -.

073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit

073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:879: INFO: a new file system is created. (size = 1120 blocks of 512 bytes)

073658.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:871: INFO: E:\psoft\PT848\appserv\CRPROD\PSTUXCFG TUXCONFIG file was created

073705.DCB - STG-APP3! PSADMIN.3964: Attempt to Begin on field CRPROD

073717.DCB - STG-APP3! tmboot.3744.864.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit

073717.DCB - STG-APP3! tmboot.3744.864.-2: LIBTUX_CAT:681: ERROR: failed to create the message queue

073717.DCB - STG-APP3! tmboot.3744.864.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: cannot create the queue

073717.DCB - STG-APP3! PSADMIN.3964: Attempt to end boot on domain CRPROD
If you are using a terminal server server, make sure that you connect to the console on the server session (using mstsc/console or mstsc/Admin, depending on your windows version of the client).

Kind regards
Bob

command line to start the application server (8.50) under Unix
Hello
What is the command line to start the application (Tools 8.50) UNIX server?

OPERATING SYSTEM: AIX 6.1
Tools: 8.50

Thank you.
You can run 'psadmin-help' to get all the options available in the command line.

Nicolas.

SOADEMO: How to start the Application BPEL Process Manger Worklist on Linux
Chapter 3 of the SOA Suite Quick Start Guide tells the user to start the BPEL Worklist Application (step 3.1.1) and lists the instructions that are clearly intended for Windows:

< p >
{color: #0000ff} To start the Application from the list of tasks:

{color} < strong > {color: #0000ff} 1.Select Start & gt; All programs & gt; Oracle - Oracle - soademo & gt; Oracle BPEL Process Manager & gt; Task list application.

{color}

< facilities > I don't see any instructions for starting the application from the list of tasks in a Linux environment. I found nothing like the screen "BPM Worklist" indicated in the Guide: I can access a page 'BPEL Control' from the homepage of SOA demo, but this page doesn't seem to be something like the screen BPM Worklist documented in the Quick Start Guide.

Can someone help me out here? Thank you.

< /p >
Hello

Try:

http://host/int integration/worklistapp /.

Best regards, Ronald

Audit of permissions is caused a late start the Application

Similar Questions

Maybe you are looking for