Auntie Photon Datacard problem

Similar Questions

• Auntie photon more modem is not recognized and installed

  Hi all I m facing problem to install the photon Auntie more the modem on my vista. I checked on other laptops with xp or vista and found it works well. but not on the PC laptop mid. How to solve the problem. Please help me

  Hi jabardast,.

  1. what happens when you connect it to the laptop?

  2. you receive an error message?

  3. are you able to use other Usb devices on the laptop?

  See the link below for AUNTIE Photon Pro FAQ and check if it helps.

  http://www.tataphoton.com/Tata-photonpro-troubleshooting-tips.aspx

  If the previous step fails, then join the Center Tata Photon for more information.

  http://www.tataphoton.com/t-customercare.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IM unable to share my connection wireless broadband (AUNTIE photon) with my 620 Lumia

  I want to share my AUNTIE Photon connection that I use on my laptop with my 620 Lumia. the option create a connection adhoc on Windows 7 laptop did not work.

  then I tried through some applications of www.download.com as 'mHotSpot', "Virtual Router WiFi", "WiFi Hotspot Creator" and "VirtualRouter Installer". they worked for a while, but all of a sudden all of them stopped working, without getting any change in the network settings.

  the problem with all of these applications is now that they don't show any connection in the internet connection to share field.

  my phone is capable to detect the router BSNL broadband and internet works fine through the connection with this router ADSL Wireless.

  someone kindly help.

  Thank you very much, Mr President. successfully connected my laptop through AUNTIE photon.

  However, not directly. I had to use the software "mHotspot" to install a hotspot first. my laptop does not detect the connection from computer to computer that I created from my laptop.

  Anyway, the work is done, thank you very much... :)

• Windows 7 Home Basic is not install Auntie photon more modem because of UAC prompts

  I have a big problem since the last 2 days and not yet resolved, my computer laptop windows 7 Home Basic is not install Auntie photon more modem, when I try to install setup.exe, error appear UAC message "do you want to allow the program following an unknown Publisher to make changes to your computer?   If Yes to insert the password admin, but I have no admin password, I only have user password to run pc and it does not support the installation, I got this laptop in grants gov., and it's a built in password protected, admin I try resetting put uac also asking admin password , so I can not able to make a change with the UAC or install the software, now what I do to install the software of my choice, pls help.

  concerning

  Yuvraj singh

  Original title: WINDOWS

  I have a big problem since the last 2 days and not yet resolved, my computer laptop windows 7 Home Basic is not install Auntie photon more modem, when I try to install setup.exe, error appear UAC message "do you want to allow the program following an unknown Publisher to make changes to your computer?   If Yes to insert the password admin, but I have no admin password, I only have user password to run pc and it does not support the installation, I got this laptop in grants gov., and it's a built in password protected, admin I try resetting put uac also asking admin password , so I can not able to make a change with the UAC or install the software, now what I do to install the software of my choice, pls help.

  You need the admin password.  Contact the admin.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• How can I connect to xbox live on xbox using Auntie Photon?

  Auntie photon is a huawei device (modem EC156 HSIA). Can we this modem with the XBox 360?

  Hi vaibhav,

  The Xbox 360 and original Xbox do not support this feature. For more information, you can visit the official Xbox forums to:
  http://forums.Xbox.com

• Qosmio G10 and Vodafone datacard problems

  Someone at - it a Vodafone Data card working on their Qosmio. Technical support of Vodafone tried everything they could think of for more than 2 months and still it didn't work. I deleted Norton Internet security as the thinking that was the problem. Same thing with Bluetooth that I had installed. Nothing. I tried my datacard Orange brothers and you have the same problem. Any ideas. I would really like a data card. Thanks in advance

  Hello

  On this forum I found a few topics with similar theme, but unfortunately without specific explanation. It's very strange that same Vodafone technical assistance could not arrange it.

  If you have success with it, please write again. This information will be very useful for other users.

  I found some info that card Vodafone PCMCIA won t work properly if the Hyper-Threading Technology is enabled.

  Good luck!

• Auntie photon more dongle works does not in my laptop

  Hello

  I have a photon more dongle which is does not in my laptop windows 7 BUT it does not work in my sister's laptop and our office...
  When I try to connect the dongle to my laptop it says that the device has been disconnected or is not available...
  Please help me

  Hello

  Thank you for your answer and I appreciate the oinformation you provided.

   
  Have you tried step 2 of my previous post? If this isn't the case tried and then uninstall and reinstall the drivers in the first place.
   
  For the error code "Code 39

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. »

  Uninstall and reinstall the driver
  

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us
   
  Also, let us know you tried the same dongle on another computer and check if it works.
  Based on the information you have provided, it seems that dongle inbulit plug-and-play drivers are corrupt and if that is the case, then you may contact the manufacturer of the same thing, and get it checked.
  http://www.tataphoton.com/customer-care.aspx
   
  Hope the helps of information.

• How to speed up my signal for Auntie plu photon strength?

  Original title: problem with Auntie photon more net connection

  How to speed up my signal for Auntie plu photon strength? My net is too slow & very dull.

  Hi shilpadarbar,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that the internet connection is slow. Before you start the troubleshooting steps, I need the required information:

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods to the problem of slow internet connectivity.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state from the link to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot network connectivity problems in Internet Explorer

  You can also see this article for more information.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  For internet speed and signal strength, you must contact the Auntie Photon support for more help and information.

  http://www.tataphoton.com/customercare.aspx

  If please follow the methods and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Problem with the Modem devices: Modem already used or not properly configured

  I use windows 8. Until last night, my laptop was working fine, but now it rejects all the modem devices, I try to plug it. I tried to connect to internet via Auntie photon and reliance netconnect +, but this message "Modem already in use or not properly configured" keeps on appearing two modem devices? Is there a problem with my OS or my laptop? Help, please

  Thanks for the solution.
  Well, my problem was similar but different too. The method to uninstall the modem device is correct. I tried, but still it did not work.
  My problem was that I have 3 different modems installed on my pc, but I used one of them. So I would uninstall only one I used. It turns out that we have to uninstall all modems. Its pretty simple, but its not so obvious. I thought about it later in like 2 days. I hope that people reading this don't have to wait 2 days to fix this problem.

• Satellite A210 - heating and BIOS update problem

  My aunt was having problems with his A210, so she bought herself a new and gave me the old one. The problems that she has been seen was the computer kept stopping at random. I think it's an overheating problem because the laptop runs quite hot. The BIOS has never been updated so I thought that might help with this problem. in any case, when I tried to update the BIOS this error message came.

  Cannot load the C:\Users\Dan\Desktop\MK10AWF\PHLASHNT driver. SYS.
  Please verify that your accounts, if you have no administrator privileges, please sign in again!
  Access is denied.
  Error code: 5

  I am the only user on the computer so I have administrator privileges and I don't know why this error is coming. Help, please. Thank you

  > Has anyone else experienced problems with the A210 of overheating? All solutions?
  Hi mate

  I m a Satellite A210 owner and to be honest, a higher internal temperature might occur if the laptop would not get enough air to cool the internal parts like CPU and GPU.
  A few weeks ago, I used the laptop on the sofa I don't the opinion of t that the cooling that are placed at the bottom of the unit fans were clogged because of my position relax, if you know what I mean ;)

  After a short period of use, the laptop shut down automatically I was a little surprised, but I realized that air could not circulate, and so the laptop overheated

  Now, I m using the unit only on the desktop. This method is recommended, and it helps to keep the temperature at the lower level

  PS: My BIOS is updated...

• HP 15-R006TU: computer HP laptop 15-R006TU left half of the screen has turned white

  I turned my HP 15-R006TU laptop to Hibernate mode before going to sleep last night. Today morning when I turned it on half of the screen was white with a few lines inside. All software and operating system works very well. Its like it has a white cover on the left side of the screen. I can't access start menu because it is on the left side of the screen.

  I turned off my laptop and unplugged the adapter, then turned on again, but it remains the same. I have not changed the drivers or anything recently. I have windows 7 ultimate 64 bit and I use the dongle Auntie Photon Max for internet. My laptop is only 2 years. I don't have anything I can remember damage the laptop and, finally, I used it, everything was fine.

  What should I do?  How to solve this problem? Virus for this or is - this display problem?

  P.S. I noticed the left hinge connecting the screen with a keyboard part is a little loose... And screen resolution is affected is I move the screen

  PLEASE HELP ME...

  It's the material. Can you connect to an external monitor? If the output is OK outside then we have reduced to a bad display cable or a bad screen. Much more likely the latter.

  You have the 15.6-inch 1366 x 768 screen, which is the most common type. Very cheap and replacing the screen is easier than you think. We will also need to assess the problem of screen hinge and eventually replace the hinge.

  After return with the country you live so interested to continue repair of mutual assistance. We can you link to a video and you will help to find the part.

• "Error 720: a connection to the remote computer could not be established.

  Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.

  I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.

  Hello

  Do the methods and check if this solves the problem.

  Method 1: Try to run the network troubleshooter, check the link for more information on the same.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method2: You can try the steps outlined in the article and check if this gives a probable solution.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Reset Internet Explorer WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• I have the Macbook pro (OS EL capitan). My dongle for internet connection does not work. Any solution?

  I have a MacPro 13 inch Keratina OS EL Capitan 10.11.5. I have the Dongle of Auntie Photon for Internet connectivity. Auntie Photon software is downloaded but it shows message 'Photon is not connected.

  Any solution?

  Thank you

  See: https://www.tatadocomo.com/en-in/list-of-customer-care

• Fastening the large folds

  Dear all, or anyone

  I pulled a large portrait of my great aunt. The problem is that at 93, she has some very deep wrinkles.  It is an in your face close up, I want to tame and reduce the ominous shadow of wrinkles.

  Healing of the paint tools, blur, content aware all seem fake. I can't find the right places on his face for clone or sample.

  I tried to get Adobe using a different label for wrinkles.

  Any help please

  Don

  Photoshop CS6

  Lightroom 4

  PS: This is my first post using the Adobe Forums... such a incredible and qualified people.

  There are several ways to achieve this.  You mentioned the blur.  Have you tried to duplicate the layer, it blurs, affecting the clarify, add blending mode a layer mask, then paint in the areas of wrinkles?  You can also split the image in frequentcies high and low by two duplicated layers.  Disable the upper and fuzzy layer to the background layer in order to remove the lines.  Turn on the top layer and select it.  Use apply Image with the subtract Mode.  Use the blur layer as the source layer and set the scale to 2 and the offset to 128.  Change the blending mode of the layer to linear light.  By doing this, you have a layer with all the details and the other with the colors and tones.  You can then edit that each separately with makes it easier to make corrections.  To reduce wrinkles by using this method: on the layer of detail, select a brush set to lighten blend mode with a color of neutral gray (128, 128, 128) with brush of low opacity on the wrinkles to clear them up.  You can set the brush to darken to hit the highlights of wrinkles.  To see what you do better, you can add a top layer of detail adjustment layer to increase the contrast, but change the layer of detail back to normal when editing.  You can then adjust the dark areas in the blurred layer that shows the wrinkles.