Aurora News: How to get my line of research on the merits and not on the top tabs? (topic: config doesn't work anymore)

Similar Questions

• How to get Illustrator 10 to run on windows 7 and not XP mode?

  I've been running Illustrator 10 Windows 7 pro with no problems. I've upgraded to a new computer with windows 7 Ultimate and Illustrator will work in XP mode. It will not open my indicating that they were created in a newer version of the existing files.

  How Illustrator can be run in windows 7?

  In fact, if you go on the .exe program file (usually in program files (x 86) \Adobe\Illustrator 10\Support Files\Contents\Windows).

  Right-click on it and select Properties.

  Select the Compatibility tab.

  In the section "compatibility mode".

  Check the box "run this program...". »

  In the drop-down list, select Windows 7

  In the section "settings".

  Check "Disable visual themes" and "disable the composition of the Bureau.

  This will allow Illustrator to function normally in Windows 7 Pro and Ultimate 64-bit systems.

• I had Adobe Photoshop Elements back in January 2011 and this laptop doesn't work anymore. I was wondering how to get it on my new laptop.  I have the serial number and everything.

  I had Adobe Photoshop Elements back in January 2011 and this laptop doesn't work anymore. I was wondering how to get it on my new laptop.  I have the serial number and everything.

  If you have problems with activation, go here: find solutions to activation errors that may occur when you launch Adobe apps.

  Click on contact us in the link if you need to reset your activation. It's when you can't access your old computer and you get the activation limit exceeded message.

• How can I get my action button can be log off and not closed? I select it in the customization tab, hit apply and then ok, but nothing changes.

  How can I get my action button can be log off and not closed?  I select it in the customization tab, hit apply and then ok, but nothing changes.

  Hi Erin,.

  Please check if you have followed the steps below to change the action of the Power button.

  By default, clicking on close button in the start menu stop your computer. You can change this so that instead of close, your computer logs you off, crashes, restarts, goes into a State of sleep or goes into hibernation.

  1. open properties of the Start Menu by clicking theStart button, clickingControl Panel,appearance and personalization, then clicking on thetaskbar and Start Menuand the taskbar.

  2. click on theStart Menu tab.

  3. in the list ofthe power button , click an item, and then clickOK.

  When you change the action of the closure of the key, the button name changes to reflect the new action.

  If the steps above do not change the option, you can try creating a new user account on your computer and check to see if it helps you change.

  To create a new user account.

  1. open user accounts by clicking the Start button, clickControl Panel, click user accounts and family safety (or by clicking onuser accounts, if you are connected to a network domain), and then clickinguser accounts.

  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4 type the name that you want to assign to the user account, click an account type, and then clickcreate an account.

  If you are able to change the action of the power button by using the new profile, access the link below and follow the steps to correct the user's profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  The amount of problems listed here in the forum, I have to ask the product is real

  Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  I'm new to the CC Apps but use the versions installed for years.  The amount of questions listed here in this forum, I have to ask the product is really stable?

  Thank you.  I've deleted and reinstalled.  Seems to have solved the problem.

• Re: Font book. I chose "restore standard fonts" by mistake. How to get back on my choice. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thank you!

  Re: Font book.

  I chose "restore standard fonts" by mistake. How to get back on my selection. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thanks in advance!

  If you click on 'Restore the standard fonts', fonts that are not included in the OS X systems is placed in a "fonts folder (deleted) next to the fonts folder.

  / Library/Fonts

• Windows vista and playstation 3 - I do not know how to get my PlayStation 3 appears on my network and I don't know how to enable file sharing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Less error have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow the simple instructions but my absence I have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow simple instructions, but my lack of expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be walked up to the baby step by baby stepof expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be crossed self-study baby baby
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Google comes up with these:
  http://www.ehow.com/how_5074747_network-PlayStation-computer.html
  http://www.ehow.com/how_2216306_add-PlayStation-3-LAN.html
  http://www.Google.com/search?q=network+a+PlayStation+and+a+home+computer&start=10&hl=en&SA=N&RLS=com.Microsoft: en - us & prmd = ivns & to source = univ & to TBS = vid:1 & to tbo = u & ei = PrtKTanFLMmCgAfjscnVDw & to oi = video_result_group & to ct = title & to resnum = 10 & ved = 0CGoQqwQwCTgK
  http://www.absolute-PlayStation.com/PlayStation-Network/expert-PlayStation-3-hardware-accessory-help-PlayStation3-PS3-console/10631-PlayStation-3-wireless-connection-setup.html Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• How to get disabled login user (without password) at startup, so NOT to SHOW at all and so after the switch, go to desktop directly

  Vista Ultimate 64-bit

  How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?

  Also after inactivity, how to not go to sleep mode and press "power on" to bring back?

  Hello

  If you want to start directly on the desktop?

  How to automatically connect at startup in Vista
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Or

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  =========================================

  Start - Control Panel - Power Options - upper left - require a password on wake up
  tick her do not require a password - save the changes.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can you help me get "send a link" back to the top?

  I used to have a band at the top of the page with this sentence...

  "send a link" or similar.

  It is at the top left the band (whatever it's called)

  somehow the whole gang has changed...

  I don't know how.

  now the upper-left corner of the Strip was stuff I didn't need...

  It reads "more visited, getting started, latest titles, works road and planned...". »

  I have no need of these.

  I just to need to be able to send a link from an open page, an email opened using mozilla firefox.

  I have windows vista.

  can you help me get "send a link" back to the top?

  Original title: I do not have a title

  Hello

  You should check with the Support of FireFox and their forums.

  Support for Firefox
  http://support.Mozilla.com/en-us/KB/

  Firefox - community and live Chat
  http://support.Mozilla.com/en-us/KB/ask

  Firefox - Forums
  http://support.Mozilla.com/en-us/questions

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• BlackBerry Smartphones SMS text - how to get a line break?

  Because unfortunately, the Enter key is programmed to send text, how can I get a line break in the drafting of a text message?

  Green-field wrote:

  Because unfortunately, the Enter key is programmed to send text, how can I get a line break in the drafting of a text message?

  SHIFT-ENTER key

• Qosmio X 770-n404 how to get enlightenment to stick IT in the Bios?

  Just got a brand new Qosmio X 770 - n404 toshiba last week

  The words of the enlightened fine keyboard when turn on
  However when it is off, and lighting set in the BIOS on it, it will not stay on after windows startup

  I will go back to the Bios and it said light off
  How can I get the illumination to paste IT off in the bios?

  (I'm talking about the illumintion option, no keyboard backlight)

  Hello

  Before you let the BIOS must * save changes * after enlightenment was defined on IT.

  Check it out!

• How to get to InDesign to concentrate on the text selection

  Hi all

  I'm trying to select text in the application window. Currently, I'm trying to browse a few found texts and then after the change is made visually review the changes.

  What I can't understand is how to get the application to focus on selection when its generated through the ARE? To specify if you do a search with the graphical interface (ctrl + f) and change find it that: field in the user interface, and then click next application will select the text found and Center the window around this selection.

  Line 04 point I would like to require the selection to appear in the InDesign window.

  arrFoundTexts = app.findGrep();
  arrFoundTexts[0].changeGrep();
  arrFoundTexts[0].select(); //tested and does not bring Text into GUI focus
  app.select(arrFoundTexts[0]);//tested and does not bring Text into GUI focus
  

  Thank you in advance for your time and care to help me find the answer.

  Text objects have a method called showText() which is done exactly as described above - don't know how I missed it.

• How to get my size perfectly shot with the framework?

  I use first CS5! I had trouble getting my "dailies" to adapt to the screen. If you look at the screen on the left below, what should be the size and frame. But it seems not to slip in the window with the final cut. I don't know if he has extremely zoomed in or what the problem is. If I click on it, I can turn to the size of the window, but in this case, it changes the size of the video. I projected all the details of my video below. Please help with this ASAP

  

  When you launch first CS5, you are presented

  with a menu of pre-defined sequence types to choose from.

  You can skip this step by pressing "Cancel", then

  import (or capture) your media, and to do this:

  

  Or, right click on a media file and select "new sequence of the Clip".

  None of these methods will ensure your sequence matches your media.

  How to choose the right sequence settings?

  http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings

  Using Adobe Premiere Pro / creating and changing sequences

  http://helpx.adobe.com/premiere-pro/using/creating-changing-sequences. HTML

• How to get rid of a shadow on the skin?

  How can I get rid of a really dark and sensitive shade that sits on the skin in a photo.

  To illustrate the great Silkrooster instructions:

  (1) create a new layer above the photo you want to correct by clicking on the new layer button highlighted below.

  

  (2) use the Paint Bucket tool, fill the new layer with 50% gray.

  

  (3) in the Layers panel, change the blending mode of the grey layer to screen.

  

  

  

  (4) create a new mask to the gray layer holding the alt/option key down while clicking on the button below.

  

  (5) make sure the mask (the black rectangle in the layers panel) is selected. Select the white color and a brush with edges rounded and paint on the hard shadows to clarify them. As Silkrooster said before, you can also play with the opacity of the brush and black paint will cancel the lightning that you did. It will take a few tries.

  

  Here are before and after shots of an area, I worked on. You can see that the shadow under my eye is not as hard as it was in the original.

  

  

  Silkrooster thanks for your great answer, and I hope you find this useful Jeanne!