auth failure VLAN vs the VLAN

Hi all

What are the criteria for determining whether to use the local network VIRTUAL auth failure or the guest VLAN?

What happens if a non - 802.1 x client connects to the port, tell a seller... 802. 1 x does not occur, then is he then comments crossing vlan?

What happens if a salesperson brings a 802. 1 x PC capable and connects it... the identification fails, but I want the seller to go in the VLAN comments in any case, I could give them a temporary user name / maybe PW to authenticate with? Hmmm...

Thanks in advance.

Hello

The local network VIRTUAL Auth-Fail is called if an Access-Reject is received from the Radius Server to the

authentication of the user or machine.  The local network VIRTUAL Auth-Fail will be called after a certain number of failures

not after the first failure of authentication.  It is a configurable value.

The VLAN comments is called otherwise EAPoL traffic comes from the customer who connects.

You can set the VLAN Auth failure and the VLAN comments on the same VLAN ID if you want to

users who have disabled begging him or a person with invalid credentials (or no credentials).

-Jesse

Tags: Cisco Security

Similar Questions

  • Dot1x comments Vlan / Auth Fail Vlan editions

    Hi all

    Configure dot1x on our access layer switch ports and I have a few problems with devices that fail authentication.  This is the current configuration on the way to the switch:

    switchport mode access

    switchport voice vlan 38

    dot1x mac-auth-bypass

    dot1x EAP authenticator

    self control-port dot1x

    multi-domain host-mode dot1x

    dot1x timeout server-timeout 10

    Server of reauth-dot1x timeout period

    dot1x tx-time 10

    dot1x timeout supp-timeout 3

    dot1x max - req 3

    dot1x max-reauth-req 3

    dot1x re-authentication

    criticism of dot1x

    critical recovery dot1x action reset

    dot1x auth failure vlan 7

    dot1x comments - vlan 7

    dot1x critical vlan 36

    spanning tree portfast

    spanning tree enable bpduguard

    When a non-employee connects they go through the authentication process and eventually fail dot1x and mab and placed in the vlan designated guest 7.  If you're doing a "show int gx / x status" on this port, switch-it shows the connected and to this vlan 7.  If you're doing a "show dot1x int gx / x details" it also shows the port as authorized (by Guest-Vlan) and politics of vlan is 7.  The problem is the user never gets a valid ip address - they receive only a 169.x.x.x.  Anyone has experience with this type of question or have any recommendations?

    Thank you

    Brian

    -First of all Eteinte, your switch orders tell me you are using old software on your switch, you must pass it first of all, there was a lot of correction of a bug and improvements to dot1x/mab in recent versions

    -Your problem is probably that the client dhcp of your comments is delay until you are finished with dot1x and mab, susally tx-period to a lower number of adjustment could help the time it takes before joining the vlan comments, but could also have an impact on your computers running dot1x, you should try some different values. Also, using Windows XP SP3 or Windows 7, also helps on your machines to dot1x, and finally using supplicant AnyConnect NAM he will operate properly without having any problems when setting the timers dot1x on your switch.

    -With the new software I go with default timers, perhaps change tx-5 second period and then use the "order mab dot1x authentication" and "authentication priority mab dot1x", also having your vlan comments like your vlan by default, will be generally also solve the problem of the guests have to do a new once-popular dhcp reqeust, however you can run into problems with stuff you wan't to use mab on.

  • U310 - "failure page in the nonpaged area."

    Hello

    I have Lenovo IdeaPAd U310. Since a few days, I have problem with booting the operating system. When I turn on, after that a few seconds system displays a BSOD with an error "page in the nonpaged area failure." After that computer try to fix yourself, then restart and... system displays a BSOD with error 'page in the nonpaged area failure' it is the same in safe mode. So I can't back up my data from the HARD drive or check system settings or drivers. I can run BIOS and boot menu, I changed the boot sequence, but the computer boot form USB CD or USB key.
    What I would do. How private backup files form HARD drive?

    My job U310 now I used onekey recovery and now have windows 8. My problem has been resolved.

  • on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

    on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

    You have the original installation media supplied with your machine? This would be a way: use the DVD to boot from, format the new hard drive and then reinstall the operating system. You can then update/upgrade to 10.11.

    Other than that, your model was not eligible to have its firmware updated to allow for the recovery of the internet which is the only other way I know - at least the only other way besides a bootable clone, you did before your defective hard disks.

    Computers that can be upgraded to use OS X Internet Recovery - Apple Support

    Do not think to partition/format your new drive first.

  • Faced with a failure of OSD task sequence. The failure messages in the end are: failure to file WIM mount (0 x 80070002) & Failed to create media (0 x 80070002)

    Hello

    Faced with a failure of OSD task sequence.

    The failure messages in the end are:

    --------------------------------------------------

    Has no file WIM mount 0 x 80070002

    Cannot create media 0 x 80070002

    CreatTSMedia failed with error 0 x 80070002 details MediaGenerator

    --------------------------------------------------------------------------------------------

    It comes via SCCM 2007 R3 and a version of Windows XP.

    I think 0 x 80070002 means "the system cannot find the file specified."

    But what file?

    How do you determine what the media Wizard is missing to generate this error?

    Is this a driver problem?

    Thank you

    John

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en/configmgrosd/threads

    Hope this information helps.

  • Oracle Data Integrator: what is a failure and where the error occurred

    I have a package with three steps (scernarios for interfaces). I'm using ODI 11 g.

    Allows to call their stepA, stepB and stepC. Each step of the interface loads the data from a source to a target table table.

    If stepA is OK, go to step B otherwise OK (fail), send an email.

    If stepB is OK, go to step C, otherwise OK (fail), send an email

    If stepC is OK, then fine, if not OK (fail), send an e-mail

    All measures have an arrow "ko" (not ok) goes to the same sendEmail icon in the diagram.

    Issues related to the:

    1. What is a failure of a step?

    (a) if the Chronogram of source is found in the error table $ E instead of going to the target, then that is considered a failure?  Or other fatal errors which made a failure?

    The reason records go to the table of errors could be a violation of the integrity of data on the target constraints, or other application level constraints such a salary must be greater than $ 100.00.

    2. in the body of the e-mail message, how to capture what stage has failed?    I have this text in the body of the message

    "Package execution error. After the failure of step:.  < % = odiRef.getSession ("SESS_NAME") % >'

    but the getSession('SESS_NAME") returns me the name of the package that is running, not the specific step that failed.

    Thank you

    Mr. Jamal

    (1) it depends on what thresholds error that you defined when you set up your CKM in the flow control and the steps that compose KMs, for example if you have chosen to ignore errors.

    (2) you must use < %="odiRef."> getPrevStepLog ("STEP_NAME") % > or <%=odiRef.getPrevStepLog("SESS_NO")%>

  • The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I

    The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I conceive on a 23 inches HD Windows desktop base. My site is displayed as it should, except on Apple desktop devices.

    This may depend on several things as if contents are pinned, scrolling is applied etc.

    Try to resize the browser preview in the Muse for verification, site url will help you to study.

    Thank you

    Sanjit

  • An error occurred when taking a snapshot: failure to suspend the VM.

    Hello

    I use vCenter 5.5 with vSphere WEB GUI to take a snapshot of a RHEL 5.4 32 basic VM on a 5.5 ESXi.  When I choose the "suspend the comments file system" instead of the "memory of the virtual machine snapshot", the creation of the Snapshot failed 90% with "an error occurred when taking a snapshot: failure to suspend the virtual machine.

    I have no problem using the 'snapshot of the virtual machine memory' option to create the snapshot.

    Your help is appreciated

    Ren Wong

    It is a bug in kernel in RHEL 5.4.  Thanks to all who helped.

    https://Bugzilla.redhat.com/show_bug.cgi?id=539328

  • SOA-INFRA is State FAILURE while improving the Oracle Identity Manager to 11.1.1.5

    This issue occurred when we tried to improve our IOM to version 11.1.1.5.

    All suites installation went well (Oracle IDAM 11.1.1.5) and SOA Suite 11.1.1.5. The field is also created, and schemas are also upgraded. But when we create a domain, the domain created, the SOA_INFRA application comes in the onset of failure, even if the soa server returns execution state.

    Please find the logs below (found when you start the server):

    < 31 July 2013 12:19:36 CEST > < error > < org.springframework.web.context.ContextLoader > < BEA-000000 > < failed to initialize context

    org.springframework.beans.factory.BeanCreationException: error creating bean with name "SensorManager" defined in ServletContext resource [/WEB-INF/fabric-config-core.xml]: cannot resolve a reference to 'FabricMesh' of the bean while setting the property "fabricMesh" bean nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'FabricMesh': FactoryBean threw the exception on the creation of the object; nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'FabricMeshTarget' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: cannot resolve a reference to 'SpringServiceEngine' bean when bean property setting "serviceEngines" with the button [6]; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: class loading error [oracle.integration.platform.blocks.java.SpringServiceEngine] to the beans with the name 'SpringServiceEngine' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: problem with the file class or dependent class; nested exception is java.lang.NoClassDefFoundError: weblogic/sca/api/ScaReferenceProcessor

    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)

    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)

    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)

    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)

    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)

    to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)

    at java.security.AccessController.doPrivileged (Native Method)

    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)

    to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)

    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)

    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)

    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)

    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)

    at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeansOfType(DefaultListableBeanFactory.java:308)

    at org.springframework.context.support.AbstractApplicationContext.getBeansOfType(AbstractApplicationContext.java:947)

    at org.springframework.context.support.AbstractApplicationContext.registerListeners (AbstractApplicationContext.jav

    The following link is as a result of the upgrade.

    http://docs.Oracle.com/CD/E23943_01/upgrade.1111/e10129/upgrade_oim.htm

    Any help will be much appreciated.

    Hello

    I found the solution to my problem in the following link:

    http://blog.Darwin-it.nl/2012/05/IM-helping-my-new-customer-in-migrating.html

    Kind regards

    Carole

  • CB, VC or ESX management failure will affect the billing for this period?

    Hello

    Another question is if CB, CR or ESX management failure will affect the billing.

    Lets say CB is down for several hours.

    VC may be down.

    ESX could lose management while continue to run virtual machines.

    Thank you.

    Hello

    When you add a vCenter to the CB, there will be a data collector pointing to the DB of the vCenter.

    CB, settings it is a JOB - synchronization of the Stats, this work comes when you add Stats enable replication when adding vCenter, this job will run every 30 minutes by default. It is a work of data collector that pulls information in the DB vCenter to each use of 30 minutes, the virtual machine, ESX, consumption.

    vCenter fails or when the failure of ESX vcenter - then I believe that no information is written to the DB vCenter, where the CB loses information and billing can be affected and there may be loss of money.

    Yet once there will be loss only if you go "REAL consumption of CPU/Mem or disc etc.

    If the costing model is "Fixed" or "Founded allowance", then according to the date that the costing are measured and not a problem in this case.

    If the CB goes down then there is nothing to be disturbed, beak Stats job can run again to collect back the news from vCenter DB.

    Deepak

  • Legend of failure to replace the caption text

    Hello

    How would I be able to achieve the following in Captivate 5:

    Location:

    I have an image, a clickbox on it and a text caption requiring the learner to click the clickbox. If someone clicks on the clickbox, a legend of the failure appears.

    I'm looking for:

    Currently, the legend of failure shows for the duration of the slide (3 seconds), then he disappears and returns to the text caption. However, I want the legend of failure to replace the text of the caption completely.

    Can anyone advise me on what I should do?

    Thank you!!

    Hello BettinaK,

    Welcome to the Adobe forums.

    You can set the timing for the legend text in its properties lets say 3 seconds. After 3 seconds, it will disappear.

    Now if the user clicks the clickbox, you will get 'type text of failure here', you can click on it and set the ignition for it, like the rest of the slide.

    Here are the screenshots

    Step 1 > your slide is something like this (I'm sorry to not use any image of the slide)

    Step 2 > now you can set the timing for the text of the legend (click here). Here I put it for only 3 seconds, so it will disappear after 3 seconds

    Step 3 > now click on 'Failure Type here text' and adjust the ignition in his properties as well

    By doin this failure of Type here text appears for the duration that you want and it will take the place of the legend text

    I hope that helps!

    Vishal

  • Have the upgrade to 5.0 and now when I load some sites I get javascript application say warning of failure - what is the problem

    Since upgrading to Firefox 5.0, some websites of returns an error message. JavaScript application is the title and the failure of the assertion message. I found some sites that where information is being downloaded that page hangs until the Refresh button is clicked.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Recent update with KB947821, may 2013, failures to receive the 9370001 error code.

    I have Windows Vista 64 SP2 and could not update KB947821, may 2013, receive the error code 9370001.  I tried several times and found no mention in this error online code. Did someone did with the line this problem? I'd appreciate any help! Thank you! Everything is updated correctly, apparently, even from this failure.

    Diane

    Diane,

    1. open Internet Explorer 32-bit (only!) for http://support.microsoft.com/kb/910336> [ignore titles, etc..], the pop-up troubleshooting automated dismiss, then run difficulty he 50202.

    [Ignore warnings "Not recommended", etc.].

    2. restart & test.

    Please let us know if it did or did not help to solve your problem.

    `~`

    The current time and the date now in Baja California, Mexico

    11:01
    Saturday, June 15, 2013
    DST - 0700 UTC
     
    UTC/GMT is 18:01 Saturday, June 15, 2013
  • start tests: failure of all the...

    All my tests startup fail, example disc, I get the ID of the fault: OGF8WM-5756hq-xdoo3f-61bj03

    the tuneup, I get the following ID: OGF8WM-5756hq-xdoo3f-60TA03.

    Does this mean that my hard drive needs to be replaced?

    the book is a hp pavilion dv7 intel core i5, Windows 7.

    Thanks for any help.

    Robert

    Hi Robert,.

    303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook dv7 series Nr - see here for an explanation.

    Kind regards

    DP - K

  • Download ID5032 failure auditing on the event viewer.

    Original title: anonymous logon in the event viewer

    3 (network) domain of anonymous logon appears in my security on Vista event viewer, Audit failure ID5032 follow-up.  Is this normal or is this malware?  There are two implications of Internet Explorer running in the Task Manager, but two relatives when I close the browser, IE9: is this normal please?  I also get Audit failure ID5038, any advice as to the causes, remedies and the dangers of these events would be much appreciated, thank you.

    Hi robin,

    The two instances of IE9 running in the Task Manager is normal.

    See the link below

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Windows-Task-Manager-showing-iexploreexe-running/94fd4ed8-652C-4756-B733-8b87c967e7ac

    Reference before:

    You can also run this next fixit.

    Difficulty Internet Explorer issues to make it fast, secure and stable IE http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

    Hope this information helps.

Maybe you are looking for

  • How can I move the tabs at the top of the screen?

    I have two computers. Both have Windows 7. Opening of Firefox on a computer, the tabs are at the top of the screen. On the second computer, there is a gap between the tabs and the top of the screen. I would like to have the tabs at the top of the scr

  • Why Firefox displays as a disk on my Mac when I download.

    When I download Firefox using the guide of the 3 step for my Mac, the icon appears as an external drive and not on the usual Firefox icon. I drag the in the Apps folder, as suggested, but when I try to follow the following steps to place in the dock

  • Office 2007 does not update install

    I installed office 2007 and served Pack 2 and now 23 updates will not install independently recommendations 'try Again '. Here is a list of facilities in chess: Update of security for Microsoft Office System 2007 (KB2288931) Download size: 82 KB You

  • Iconia W4-820-2671

    Hello I am a new Member, I want to buy me a W4-820-2671 Iconia tablet, I need to go to Germany, it will work in Germany and how do I connect to the Net? I am aware to transformation of 220 V 110 V, anyone know some answers, that I would be really gra

  • How and what to upgrade on a HP Envy 17

    Can I upgrade the memory and the CPU and memory on this computer and with what. That's what the laptop is came up with in October 2011. HP ENVY 17 customizable Notebook PC • Genuine Windows 7 Home Premium 64-bit • 2nd generation Intel Core i7-2630QM