Auth of remote VPN through LDAP allow all users!

Hello

I have 5505 firewall and security license. I have configure remote VPN on firewall through CLI with the commands below. Remote VPN works well, but the problem is, it allows all remote VPN users. I need to restrict remote VPN access bit user, I need to configure via CLI, I don't want to go through ASDM, can someone help me with CLI?

ASDM I can able to perfom below things I'm not able to perform through CLI

Configuration-> access to the network (Client)-> dynamic access policies

Through ASDM I'm able to set the VPN users are allow to remote VPN access, how to set up same thing through CLI

Here's my CLI:

LDAP attribute-map CISCOMAP

name of the KFG IETF Radius-class card

map-value VPN CN = VPN, DC = domain, DC = com noaccess_pri

map-value VPN CN = VPN, DC = domain, DC = com noaccess_bk

map-value VPN CN = VPN, DC = domain, DC = com splitgroup_pri

map-value VPN CN = VPN, DC = domain, DC = com splitgroup_bk

AAA-server ldapgroup protocol ldap

ldapgroup AAA-server (inside) host 10.1.10.5

LDAP-base-dn dc = domain, dc = com

LDAP-scope subtree

LDAP-naming-attribute sAMAccountName

LDAP-login-password Inf0rmati0n1

LDAP-connection-dn cn = VPN, dc = domain, dc = com

microsoft server type

LDAP-attribute-map CISCOMAP

internal noaccess_pri group policy

attributes of the strategy of group noaccess_pri

VPN - concurrent connections 0

output

internal noaccess_bk group policy

attributes of the strategy of group noaccess_bk

VPN - concurrent connections 0

output

internal splitpolicy_pri group policy

Protocol-tunnel-VPN IPSEC l2tp ipsec

tunnel-group splitgroup_pri General-attributes

ldapgroup group-LOCAL authentication server

internal splitpolicy_bk group policy

Protocol-tunnel-VPN IPSEC l2tp ipsec

tunnel-group splitgroup_bk General-attributes

ldapgroup group-LOCAL authentication server

Thank you

Abhishek

Hello

You cannot configure the DAP via CLI Protocol because the configuration is saved in a file dap.xml and is stored in flash of the SAA.

You can configure the DAP protocol using the following link:

http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml#T4

Also note that the link mentions the following:

Note:

The dap.xml file that contains the attributes of selection policies DAP, is stored in flash of the SAA. Although you can export the file dap.xml out, the edit box (if you know about the xml syntax), and re - import again, be very careful, because you might ASDM stop treatment of DAP files if you have misconfigured something. There is no CLI to handle this part of the configuration.

I hope this helps.

Kind regards

Anisha

P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

Tags: Cisco Security

Similar Questions

  • access remote vpn with ldap

    Hi all

    IM, configuration of a vpn for remote access with ldap, for what I see in some examples, I need to create a user/pass.

    In my case, I already configured the aaa for the ldap Protocol Server. I also have the Group tunnl with the authentication server.

    I need to create a user/pass?

    Thank you.

    Hello

    I see what you mean!

    It is not necessary for the integration of LDAP.

    You don't have authentication LDAP not the LOCAL database, so no need for this.

    Do not forget to rate all my answers

    Julio Carvajal
    Main and specialist of the Core network security
    CCIE #42930, 2-CCNP JNCIS-SEC
    For immediate assistance commit to http://i-networks.us

  • is there a way to allow all users to keep the settings for Dream Weaver DD?

    I'm on a roaming profile and keep the problems with it saves settings. is there a way to define the Dream Weaver to keep the settings on the local computer so that everyone who connects to the PC using the same settings. I'm tired of spending all my time reset place Weaver of dreams rather than being able to use it.

    Thank you

    Christopher J. Crandall

    Is synchronize site settings, preferences, keyboard shortcuts, and workspaces in Dreamweaver if you want?

  • Remote VPN access - add new internal IP address

    Hello

    I have an existing configuration of Cisco VPN client in ASA 5510 for remote access.

    -------------------------------------

    Name of the Group: ISETANLOT10

    Group password: xxxx
     
    IP pool: lot10ippool, 172.27.17.240 - 172.27.17.245
     
    enycrption: 3DES
    authentication: SHA
    ------------------------------------
    the connection was successful, and I was able to ping to the internal server 172.47.1.10.
    Now, there is demand for remote access VPN even can do a ping to access a new server within LAN, 172.57.1.10 & 172.57.1.20
    But with the same VPN access, I was unable to ping the two new IP.
    How can I add both IP in order to make a ping by using the same configuration of remote access VPN?
    I have attached below existing config (edited version)
     
    ===

    : Saved
    :
    ASA Version 8.0 (4)
    !
    hostname asalot10
    names of
    name 172.17.100.22 NAVNew
    name 172.27.17.215 NECUser
    172.47.1.10 NarayaServer description Naraya server name
    name 62.80.122.172 NarayaTelco1
    name 62.80.122.178 NarayaTelco2
    name 172.57.1.10 IPVSSvr IPVSSvr description
    name 122.152.181.147 Japan01
    name 122.152.181.0 Japan02
    name 175.139.156.174 Outside_Int
    name 178.248.228.121 NarayaTelco3
    name 172.67.1.0 VCGroup
    name 172.57.1.20 IPVSSvr2
    !
    object-group service NECareService
    Description NECareService remote
    the eq https tcp service object
    EQ-ssh tcp service object
    response to echo icmp service object
    inside_access_in deny ip extended access list all Japan02 255.255.255.0
    inside_access_in ip VCGroup 255.255.255.0 allowed extended access list all
    inside_access_in list extended access deny tcp object-group PermitInternet any object-group torrent1
    inside_access_in list extended access allowed object-group ip PermitInternet any newspaper disable
    inside_access_in list any newspaper disable extended access allowed host ip NarayaServer
    inside_access_in list extended access permit ip host IPVSSvr all
    inside_access_in list any newspaper disable extended access allowed host ip NAVNew
    inside_access_in list extended access permit ip host 172.17.100.30 all
    outside_access_in list extended access allow object-group objects NECare a NECareService-group
    outside_access_in list extended access allowed host ip DM_INLINE_NETWORK_1 NarayaServer object-group
    outsidein list extended access permit tcp any host Outside_Int eq https
    outsidein list extended access allowed object-group rdp any host Outside_Int debug log
    outsidein list extended access allowed host tcp object-group DM_INLINE_NETWORK_2 eq Outside_Int 8080
    outsidein list extended access allowed host ip DM_INLINE_NETWORK_3 IPVSSvr object-group
    inside_mpc list extended access allowed object-group TCPUDP any any eq www
    inside_mpc list extended access permit tcp any any eq www
    inside_nat0_outbound list of allowed ip extended access all 172.27.17.240 255.255.255.248
    inside_nat0_outbound list extended access permit ip host NarayaServer Nry_Png object-group
    inside_nat0_outbound list extended access allowed host ip IPVSSvr2 172.27.17.240 255.255.255.248
    outside_cryptomap list extended access permitted ip object-group Naraya_Png-group of objects Nry_Png

    Global interface 10 (external)
    NAT (inside) 0-list of access inside_nat0_outbound
    NAT (inside) 10 0.0.0.0 0.0.0.0
    static (inside, outside) interface tcp 8080 8080 NarayaServer netmask 255.255.255.255
    static (inside, outside) tcp 3389 3389 NAVNew netmask 255.255.255.255 interface
    public static tcp (indoor, outdoor) interface ssh IPVSSvr2 ssh netmask 255.255.255.255
    Access-group outsidein in external interface
    inside_access_in access to the interface inside group
    Route outside 0.0.0.0 0.0.0.0 175.139.156.173 1
    Route inside 172.17.100.20 255.255.255.255 172.27.17.100 1
    Route inside NAVNew 255.255.255.255 172.27.17.100 1
    Route inside 172.17.100.30 255.255.255.255 172.27.17.100 1
    Route inside NarayaServer 255.255.255.255 172.27.17.100 1
    Route inside 172.47.1.11 255.255.255.255 172.27.17.100 1


    Route inside VCGroup 255.255.255.0 172.27.17.100 1

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
    cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
    card crypto outside_map 1 match address outside_cryptomap
    card crypto outside_map 1 set 218.x.x.105 counterpart
    card crypto outside_map 1 set of transformation-ESP-3DES-SHA
    outside_map map 1 lifetime of security association set seconds 28800 crypto
    card crypto outside_map 1 set security-association life kilobytes 4608000
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 30
    preshared authentication
    3des encryption
    md5 hash
    Group 2
    life 86400

    internal ISETANLOT10 group policy
    ISETANLOT10 group policy attributes
    value of server DNS 172.27.17.100
    Protocol-tunnel-VPN IPSec l2tp ipsec
    username, password nectier3 dPFBFnrViJi/LGbT encrypted privilege 0
    username nectier3 attributes
    VPN-group-policy ISETANLOT10
    username password necare encrypted BkPn6VQ0VwTy7MY7 privilege 0
    necare attributes username
    VPN-group-policy ISETANLOT10
    naraya pcGKDau9jtKgFWSc encrypted password username
    naraya attribute username
    VPN-group-policy ISETANLOT10
    type of nas-prompt service
    type tunnel-group ISETANLOT10 remote access
    attributes global-tunnel-group ISETANLOT10
    address lot10ippool pool
    Group Policy - by default-ISETANLOT10
    IPSec-attributes tunnel-group ISETANLOT10
    pre-shared-key *.
    tunnel-group 218.x.x.105 type ipsec-l2l
    218.x.x.105 group of tunnel ipsec-attributes
    pre-shared-key *.
    type tunnel-group ivmstunnel remote access
    tunnel-group ivmstunnel General-attributes
    address lot10ippool pool
    ivmstunnel group of tunnel ipsec-attributes
    pre-shared-key *.
    !

    =====

    Remote VPN access must allow the connection, but I'm guessing that your ASA does not know how to get to the two new destinations.

    You have a name and a static route to the job to 172.47.1.10 Server:

    name 172.47.1.10 NarayaServer description Naraya Server

    route inside NarayaServer 255.255.255.255 172.27.17.100 1

    .. but no equivalent for the two new hosts. As a result, all traffic of ASA destiny for them will attempt to use the default route (via the external interface).

    If you add:

    route inside 172.57.1.10 255.255.255.255 172.27.17.100

    route inside 172.57.1.20 255.255.255.255 172.27.17.100

    (assuming this is your correct entry), it should work.

  • Microsoft Remote Desktop does not allow users to log on simultaneously

    Original title: problem with Microsoft Remote Desktop not allowing users to log on simultaneously

    I am currently using a MAc to connect to a desktop running windows 7. Recently, when I try to access the computer with Microsoft Remote Desktop it will launch all users on the computer. He was not used to do this, does anyone have an idea what could have caused this and how to fix it?

    Hi Bert,.

    Thanks for posting your query in Microsoft Community Forum.

    The question you posted would be better suited in the TechNet Forums. However, we can refer to the articles below and check if the problem still persists.

    Configure the remote desktop on Windows 7 systems

    Connect to another computer using Remote Desktop connection

    If the problem persists, I recommend posting your query in the TechNet Forums for the best support.

    Hope this information is useful. Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

    Thank you.

  • How to change the permission to touch the key settings for all users?

    Original title: Howsto permission change to change the touchpad settings

    Members of the Forum,

    My windows7 OS is implemented for several different users.  The touchpad is very sensitive, it is difficult to work with EXCEL or WORD.  Whenever possible, I use a USB keyboard and mouse, but it's not always convenient.  I would like to change the permissions on the mouse settings to allow all users to disable or customize the touch pad settings.  How did you do that.  Any assistance is much appreciated.

    Lemorse

    Mahesh,

    Thank you for your response.  First of all to answer your questions.  I do not work in a domain environment, my computer is custom built, and I am the administrator.  I changed the touchpad settings in the past, but it I need to make on behalf of users administrator when I want to change. As it's boring, I wanted a more convenient way to change the settings. (It was much easier with XP and previous editions of Windows because they would ask permission to make the change and if you have the administrator password, you can change the settings).  I usually work as a user limited to guard against unauthorized or accidental system changes.  After posting my question, I kept sleeping with her and found that if I changed the permissions of pilot pad touch and shared with me as a limited user, I was able to customize I like it as a limited user.  By placing the shortcut to the driver on the desktop that I am able to disable the touchpad at will whenever I work on WORD or EXCEL.  Therefore, I solved the problem.  Once again thank you for taking your valuable time to answer my post.

    Lemorse

  • How to allow remote VPN Sessions to communicate

    Hi all

    I'm trying to understand how to enable remote VPN client sessions to communicate.  For example, if my manager has been connected via VPN to the office and needed me to fix something on his laptop, I cannot VPN to the office and RDP into her laptop.  Not sure if this can be done without pain.

    A brief out of my config.  Remote client VPN sessions work fine.  It's only when I try to access other customer VPN sessions, is where I have a problem.

    Thank you is advanced!

    FW # executed sho

    : Saved

    :

    interface Ethernet0/0

    nameif inside

    security-level 100

    IP 192.168.1.1 255.255.255.0

    !

    interface Ethernet0/1

    nameif outside

    security-level 0

    IP 4.4.1.8 255.255.255.252

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    !

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    outside_in list extended access permit icmp any one

    split_tunnel list standard access allowed 192.168.1.0 255.255.255.0

    inside_access_in of access allowed any ip an extended list

    outside_access_in of access allowed any ip an extended list

    access-list sheep extended 10.10.10.0 any allowed ip 255.255.255.0

    IP local pool vpn 10.10.10.1 - 10.10.10.15 mask 255.255.255.0

    Global 1 interface (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 0.0.0.0 0.0.0.0

    inside_access_in access to the interface inside group

    Access-group outside_in in external interface

    Route outside 0.0.0.0 0.0.0.0 4.4.1.7 1

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto-map dynamic inetdyn_map 20 the value transform-set ESP-DES-SHA

    map inet_map 65535-isakmp ipsec crypto dynamic inetdyn_map

    inet_map interface card crypto outside

    inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    inside crypto map inside_map interface

    crypto isakmp identity address

    crypto ISAKMP allow inside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    the Encryption

    sha hash

    Group 2

    life 86400

    Crypto isakmp nat-traversal 21

    internal vpnipsec group policy

    attributes of the strategy of group vpnipsec

    value of 192.168.1.5 WINS server

    value of server DNS 192.168.1.5

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list split_tunnel

    moobie.com value by default-field

    type tunnel-group vpnipsec remote access

    tunnel-group vpnipsec General-attributes

    vpn address pool

    Group Policy - by default-vpnipsec

    vpnipsec group of tunnel ipsec-attributes

    pre-shared key nope

    !

    Hello

    You need to allow pool vpn split tunnel, here's what you need to do

    split_tunnel list standard access allowed 10.10.10.0 255.255.255.0

    same-security- allowed traffic intra-interface

    Kind regards

    Bad Boy

    P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

  • authentication of remote access, vpn and ldap

    I have a test environment with 2 hours fireval 5505: the first firewall is remote access VPN server and the Interior of this firewall is a network of domain with a domain controller, DNS server and a workstation. DHCP is disabled and the PC have a static address.outside of the VPN server is attached outside the other ASA 5505 firewall. on the inside of the firewall, there is a workstation.the workstation would be to connect via vpn for remote access on the domain network. I have configured the VPN server for remote access through a wizard and his

    configuration is the following

    Result of the command: "show running-config"

    : Saved

    :

    ASA Version 8.2(1)

    !

    hostname ciscoasa

    domain-name dri.local

    enable password 8Ry2YjIyt7RRXU24 encrypted

    passwd 2KFQnbNIdI.2KYOU encrypted

    names

    !

    interface Vlan1

    nameif inside

    security-level 100

    ip address 10.13.74.5 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    ip address 192.168.30.1 255.255.255.0

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    ftp mode passive

    dns server-group DefaultDNS

    domain-name dri.local

    access-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.240

    access-list outside_access_in extended permit tcp 192.168.50.0 255.255.255.240 10.13.74.0 255.255.255.0

    pager lines 24

    logging asdm informational

    mtu inside 1500

    mtu outside 1500

    ip local pool vpnpool 192.168.50.1-192.168.50.10 mask 255.255.255.0

    icmp unreachable rate-limit 1 burst-size 1

    no asdm history enable

    arp timeout 14400

    global (outside) 1 interface

    nat (inside) 0 access-list inside_nat0_outbound

    nat (inside) 1 0.0.0.0 0.0.0.0

    access-group outside_access_in in interface outside

    route outside 0.0.0.0 0.0.0.0 192.168.30.2 1

    timeout xlate 3:00:00

    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-record DfltAccessPolicy

    action terminate

    dynamic-access-policy-record vpnldap

    network-acl inside_nat0_outbound

    aaa-server vpn protocol ldap

    aaa-server vpn (inside) host 10.13.74.20

    ldap-base-dn DC=DRI,DC=LOCAL

    ldap-group-base-dn cn=test,cn=users,dc=dri,dc=local

    ldap-scope subtree

    ldap-naming-attribute sAMAccountName

    ldap-login-password *

    ldap-login-dn cn=test,cn=users,dc=dri,dc=local

    server-type microsoft

    http server enable

    http 10.13.74.0 255.255.255.0 inside

    no snmp-server location

    no snmp-server contact

    snmp-server enable traps snmp authentication linkup linkdown coldstart

    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac

    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac

    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac

    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac

    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac

    crypto ipsec security-association lifetime seconds 28800

    crypto ipsec security-association lifetime kilobytes 4608000

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5

    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

    crypto map outside_map interface outside

    crypto isakmp enable outside

    crypto isakmp policy 10

    authentication pre-share

    encryption 3des

    hash sha

    group 2

    lifetime 86400

    telnet timeout 5

    ssh timeout 5

    console timeout 0

    dhcpd auto_config outside

    !

    dhcpd address 10.13.74.9-10.13.74.40 inside

    !

    threat-detection basic-threat

    threat-detection statistics access-list

    no threat-detection statistics tcp-intercept

    webvpn

    group-policy drivpn internal

    group-policy drivpn attributes

    dns-server value 10.13.74.20 10.8.2.5

    vpn-tunnel-protocol IPSec l2tp-ipsec

    default-domain value dri.local

    tunnel-group drivpn type remote-access

    tunnel-group drivpn general-attributes

    address-pool vpnpool

    authentication-server-group vpn

    default-group-policy drivpn

    tunnel-group drivpn ipsec-attributes

    pre-shared-key *

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    policy-map type inspect dns preset_dns_map

    parameters

    message-length maximum 512

    policy-map global_policy

    class inspection_default

    inspect dns preset_dns_map

    inspect ftp

    inspect h323 h225

    inspect h323 ras

    inspect rsh

    inspect rtsp

    inspect esmtp

    inspect sqlnet

    inspect skinny

    inspect sunrpc

    inspect xdmcp

    inspect sip

    inspect netbios

    inspect tftp

    !

    service-policy global_policy global

    prompt hostname context

    Cryptochecksum:1fc23fb20a74f208b3cde5711633ad3d

    : end

    When I tried to workstation on the internal part of the second firewall (no remote access vpn server) to connect to the vpn, everything is ok. I used the cisco vpn client, but I can't ping domain controller, workstation, I can't use the shared folder on them. Why?

    Please help me

    Thank you

    Thanks for letting me know! Can you please give the station "answered"? Thank you!

  • How to allow access to the external network of VPN through PPTP

    Hi guys, this is probably a simple one, but I have not much firewall experience so any help is appreciated.

    We would like to have the opportunity to connect to a private network virtual to a company, we have recently acquired.  When you connect to it directly from the Internet (not), it is accessible.  However, behind our firewall, there is no access.  We use Cisco ASA 8.2 (2)

    Currently, we have an entry as follows:

    PPTP tcp service object-group

    EQ pptp Port object

    inside_access_in list extended access permit tcp any host object_name object-group PPTP

    Please can anyone advise what else are required to complete what I'm not sure of what else is needed?  Basically, we want any device within our network in order to access the VPN through PPTP.

    Your help is appreciated

    Kind regards

    Hi Angelo,.

    It should work when you make a pptp permitted and inspected. But will also Appreciate ACL with your firewall to the PPTP server.

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080094a5a.shtml#pptpwith

    The above documents helps you better understand.

    Please assess whether the information provided is useful.

    By

    Knockaert

  • Trying of authenticating to a LDAP group users - all users authenticated

    ASA successfully authenticates all users if they are in the OKCVPNAccess user group, and the ASA correctly sees the LDAP map attribute. There is that a single policy.

    [54] memberOf: value = CN = VPNAccess-OKC, OR = Groups, OU = OU = xxx, xxx, DC = xxx, DC = local
    [54] mapped to IETF-RADIUS-class: value = LDAPPolicy

    I been through a lot of documentation on the web sites of Cisco but also looked at several forums, but I'm coming up with a blank as to what I can try next. I know that it will work with RADIUS and RADIUS I've used several times in the past, so this isn't an option. I was asked to do with LDAP. Any suggestions? I've included the part of the Setup, and I tried to sanitize it somewhat, so there may be an inconsistency of name here or there.

    Thank you

    LDAP attribute-map LDAPMAP
    name of the memberOf IETF-Radius-class card
    memberOf card-value CN = VPNAccess-OKC, OR = Groups, OU = xxx, OU = xxx, DC = xxx, DC is local LDAPPolicy
    dynamic-access-policy-registration DfltAccessPolicy
    AAA-Server LDAP protocol ldap
    AAA-Server LDAP (inside) host 10.12.34.248
    Server-port 389
    LDAP-scope subtree
    LDAP-naming-attribute sAMAccountName
    LDAP-login-password *.
    LDAP-connection-dn xxx\vpn.auth
    microsoft server type
    LDAP-attribute-map LDAPMAP

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto-map dynamic outside_dyn_map 20 set pfs
    Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
    crypto CRYPTO card - card 1000 ipsec-isakmp dynamic outside_dyn_map
    CRYPTO-card interface card crypto outside

    crypto isakmp identity address
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP disconnect - notify

    internal CRYPTOGP group policy
    CRYPTOGP group policy attributes
    banner value of using this system is... Please log out immediately!
    value of 10.12.34.248 DNS server 10.129.8.136
    Protocol-tunnel-VPN IPSec
    enable PFS
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list SPLITTUNNEL
    xxx.local value by default-field

    type tunnel-group CRYPTO-OKC-VPN remote access
    General-attributes of CRYPTO-OKC-VPN Tunnel-group
    LDAP authentication group-server
    IPPOOL address pool
    Group Policy - by default-CRYPTOGP
    LDAP authentication group-server
    tunnel-group CRYPTOOKC-VPN ipsec-attributes
    pre-shared-key *.

    In my view, using the map LDAP is just for an LDAP attribute to an appropriate group policy, you can control access user group policy.

    Here is an example.

    http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a008089149d.shtml

    After the user is connected, vpn can you use "show vpn-sessiondb" to check what group policy is used?

    Moreover, I did not see 'LDAPPolicy' has been defined in your configuration.

  • Tunnel VPN remote Internet and VPN remote VPN from Site to Site traffic?

    Hello

    We try to remote traffic from our users VPN tunnel through our ASA 5510 as well as to allow the only access for remote user VPN traffic to the other end of the all our VPN site-to-site connected to the same ASA. Basically, we who want to VPN in the network in order to access all of our networks business. We try to get away with this without using split Tunneling.

    I can currently get internal traffic from the remote user VPN to reach all other vpn site-to-site tunnels without the internet in tunnel. The problem is when I add the following statement to the NAT:

    NAT (outside) 1 10.10.19.0 255.255.255.0 * 10.10.19.0 is the address of the remote VPN Client

    Internet traffic to the remote VPN starts to get in the tunnel, but I lose the opportunity to reach one of the other tunnels from site to site by the remote VPN tunnel.

    I also begin to receive the following errors in the journal of the ASA

    3 July 1, 2009 12:34:18 305005 10.10.19.255 137 no group of translation not found for udp src outside:10.10.19.3/137 dst outside:10.10.19.255/137

    Any help with how NAT statements must be defined for this work would be appreciated.

    Thank you

    Will be

    Will,

    the link of this post for your scenario of vpn hub & speak reference, you problem may be on exempt nat rules.

    Have a second look at your sheep rules.

    Be sure to eliminate tunnel rules related to rheumatoid arthritis, as appropriate, to not let him get in the way of splitting.

    http://forums.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=firewalling&TopicId=.ee6e1fa&fromOutline=true&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2e0f6/4

    If always emits discribe topology for l2ls and info logic RA and sanatized hub config asa... but I think if you look at the thread above, you should be able to solve.

    Concerning

  • Access to the internal mail (Exchange) by centimeters remote VPN server

    Hi all

    I have a problem in the configuration of ASA 5510 to access my internal mail (Exchange) through remote access VPN server

    one... I have set up my D-Link ADSL router to port before the SMPTP (25) & POP3 (110) to the external interface of ASA 5510 (192.168.5.101 255.255.255.0)

    b. How can I configure ASA 5510 (using ASDM) to portforward (SMTP POP3 110 25) to my internal mail server with IP 192.168.50.2 255.255.255.0

    c. my internal LAN network (192.168.50.0 255.255.255.0) is coordinated at 10.1.1.0 255.255.255.224 for vpn clients

    d. my IP of mail server (192.168.50.2 255.255.255.0) will also be translated while clients are accessing content through remote VPN access

    e.What IP (Exchange of IP of the server (192.168.50.2) do I have to set up in Microsoft Outlook (incoming & outgoing mail server), vpn clients receive using a NAT IP 10.1.1.10

    Here's my configuration details of access remote vpn

    : Saved

    : Written by enable_15 at 13:42:51.243 UTC Thursday, November 27, 2008

    !

    ASA Version 7.0 (6)

    !

    hostname xxxx

    domain xxxx

    enable the encrypted password xxxxx

    XXXXX encrypted passwd

    names of

    DNS-guard

    !

    interface Ethernet0/0

    nameif outside

    security-level 0

    IP 192.168.5.101 255.255.255.0

    !

    interface Ethernet0/1

    nameif inside

    security-level 100

    IP 192.168.50.101 255.255.255.0

    !

    interface Ethernet0/2

    Shutdown

    No nameif

    no level of security

    !

    interface Management0/0

    nameif management

    security-level 100

    management only

    IP 192.168.1.1 255.255.255.0

    !

    passive FTP mode

    list of access inside the _nat0_outbound extended permits all ip 10.1.1.0 255.255.255.224

    allow a standard vpn access list

    outside_cryptomap_dyn_20 list of allowed ip extended access any 10.1.1.0 255.255.255.224

    vpn-ip-pool 10.1.1.10 mask - 255.255.255.0 IP local pool 10.1.1.25

    Global interface 10 (external)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 10 0.0.0.0 0.0.0.0

    Route outside 0.0.0.0 0.0.0.0 192.168.5.1 (D-Link ADSL router LAN IP) 1

    internal vpn group policy

    attributes of vpn group policy

    Split-tunnel-policy excludespecified

    Split-tunnel-network-list value vpn

    WebVPN

    xxxxx xxxx of encrypted password privilege 0 username

    attributes of username xxxxx

    Strategy-Group-VPN vpn

    WebVPN

    ASDM image disk0: / asdm - 508.bin

    don't allow no asdm history

    ARP timeout 14400

    Enable http server

    http 192.168.1.0 255.255.255.0 management

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-3DES-SHA edes-esp esp-sha-hmac

    Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

    card outside_map 655535-isakmp ipsec crypto dynamic outside_dyn_map

    outside_map interface card crypto outside

    ISAKMP allows outside

    part of pre authentication ISAKMP policy 10

    ISAKMP policy 10 3des encryption

    ISAKMP policy 10 sha hash

    10 2 ISAKMP policy group

    ISAKMP life duration strategy 10 86400

    tunnel vpn ipsec-ra group type

    VPN tunnel-group general attributes

    ip vpn-pool address pool

    Group Policy - by default-vpn

    Tunnel vpn ipsec-attributes group

    pre-shared-key *.

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    management of 192.168.1.2 - dhcpd address 192.168.1.254

    dhcpd lease 3600

    dhcpd ping_timeout 50

    enable dhcpd management

    !

    Policy-map global_policy

    class inspection_default

    inspect the dns-length maximum 512

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    !

    global service-policy global_policy

    : end

    So can someone help me, how can I configure these tasks

    You can without problem

  • WebVPN and remote vpn, ssl vpn anyconnect

    Hi all

    Differences between webvpn and remote vpn, ssl vpn anyconnect
    All require a separate license?

    Thank you

    Hello

    The difference between the webvpn and SSL VPN Client is the WebVPN to use SSL/TLS and port

    send through a java application to support the application, it also only supports TCP for unicast traffic, no ip address

    address is assigned to the customer, and the navigation on the web in the tunnel is made with a SSL

    Web-mangle that allows us stuff things in theSSL session.

    SSL VPN (Anyconnect) Client is a client of complete tunneling using SSL/TCP, which installs an application on the computer and

    envelopes vpn traffic in the ssl session and thus also an assigned ip address has the

    tunnel's two-way, not one-way.   It allows for the support of the application on the

    tunnel without having to configure a port forward for each application.

    AnyConnect is a client of new generation, which has replaced the old vpn client and can be used as long as the IPSEC vpn ssl.

    For anyconnect licenses please see the link below:

    http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

    Kind regards

    Kanwal

  • Remote VPN on ASA5540

    Here's the situation

    I am slowly migrating from a Cisco VPN 3030 to a Cisco ASA5540 hub

    My L2L tunnels come along fine, but I'm running issues with attachment for remote VPN Clients.

    I implemented the AAA and it works correctly, as well as the profile.  (we use IPSec)

    My issues are with the IP Pool address.   We use a different set of the IP as the hub.

    I have implemented routing on the next hop within the ASA as the home of the ip address pool of.

    But I don't get any through put.

    Can I join the ASA with a Client remote check the Radius Server and all authentication through.  But I can't access anything whatsoever.

    All lanes of route for the IP address pool from within the network to the ASA.

    Is there something else I need to put in place also just assign the IP address Pool?

    any suggestions would be helpful

    Thank you

    The problem isn't necessarily routing. Check the following things:

    1. have you for the pool VPN nat exemption (you need)... If this isn't the case you will see on any group of translation found syslog messages and traffic will be dropped. Assume that your VPN pool is 172.16.4.0 255.255.255.255. You add:

    sheep ip access-list allow any 172.16.4.0 255.255.255.0

    NAT (inside) 0 access-list sheep

    2. do you have an access-group applied to the interface? Make a ' group-access show run. If you have applied, make sure that the access list permits traffic at the pool of the VPN client

    3. If it is IPSec and the customer or the SAA is behind a NAT, you must have the following:

    ISAKMP nat-traversal

    -heather

    Please rate this message if this helped you.

  • Cannot ping via remote VPN

    Hi all

    I have a client who uses a 506e with the cleint 4.02 for the remote VPN Cisco. The pix is multiple inside roads. The first network inside is 192.168.1.X and E1 of the 506 is 192.168.1.1. The second network is 10.71.56.X.

    The problem is as soon as the VPN is connected I can ping any host on the 192.168.1.X, but not anything on the 10.71.56.X network. Without netbios or the other. From the PIX, I can ping hosts on two internal networks.

    Here is the config below. Thank you!

    6.2 (2) version PIX

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate the password xxxxx

    passwd xxxxxxx

    hostname GNB - PIX

    cisco.com-domain name

    fixup protocol ftp 21

    fixup protocol http 80

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol they 389

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol sip 5060

    fixup protocol 2000 skinny

    names of

    QUBEADMIN tcp service object-group

    Beach of port-object 444 444

    outside_access_in list access permit tcp any host 12.X.X.X eq pop3

    outside_access_in list access permit tcp any host 12.X.X.X eq smtp

    outside_access_in list access permit tcp any host 12.X.X.X EQ field

    outside_access_in list access permit tcp any host 12.X.X.X eq www

    outside_access_in list access permit tcp any host 12.X.X.X QUBEADMIN object-group

    outside_access_in list access permit icmp any any echo response

    access-list outside_access_in allow icmp all once exceed

    outside_access_in list access permit tcp any host 12.169.2.21 eq ssh

    GNB_splitTunnelAcl ip 10.71.56.0 access list allow 255.255.255.0 any

    outside_cryptomap_dyn_20 ip access list allow any 10.71.56.32 255.255.255.224

    pager lines 24

    opening of session

    timestamp of the record

    logging paused

    logging buffered stored notifications

    Logging trap errors

    notifications to the history of logging

    the logging queue 0

    host of logging inside the 10.71.55.10

    logging out of the 192.104.109.91 host

    interface ethernet0 car

    Auto interface ethernet1

    ICMP allow any inside

    Outside 1500 MTU

    Within 1500 MTU

    IP address outside 12.X.X.X 255.255.254.0

    IP address inside 192.168.1.254 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    local IP VPNPOOL 10.71.56.40 pool - 10.71.56.50

    history of PDM activate

    ARP timeout 14400

    Global interface 10 (external)

    NAT (inside) 0-list of access inside_outbound_nat0_acl

    NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

    public static 12.X.X.X (Interior, exterior) 192.168.1.1 mask subnet 255.255.255.255 0 0

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 12.X.X.X 1

    Route inside 10.71.55.0 255.255.255.0 192.168.1.1 1

    Route inside 10.71.56.0 255.255.255.0 192.168.1.1 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    the ssh LOCAL console AAA authentication

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20

    Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

    map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

    outside_map interface card crypto outside

    ISAKMP allows outside

    part of pre authentication ISAKMP policy 20

    ISAKMP policy 20 3des encryption

    ISAKMP policy 20 chopping sha

    20 2 ISAKMP policy group

    ISAKMP duration strategy of life 20 86400

    vpngroup address VPNPOOL pool GUARD

    vpngroup dns-server 10.71.56.10 GNB 10.71.56.10

    GNB GNB_splitTunnelAcl vpngroup split tunnel

    vpngroup GNB 1800 idle time

    GNB vpngroup password *.

    Telnet timeout 5

    SSH timeout 60

    Terminal width 80

    Cryptochecksum:XXXXX

    : end

    [OK]

    GNB - PIX #.

    You use 10.71.56.0 255.255.255.0 in two places

    you route to it via 192.168.1.1, but you're also allocation of addresses for vpn clients. Guests who are on the segment 10.71.56.0/24, if they manage to get the connected vpn client package (which is assigned a 10.71.56.x) address, would not send the response packet to this request on the local subnet, the router that has the 192.168.1.1 interface, which is what would be needed to make it work.

    You must use a different network for your vpn clients block - you cannot use the same ip through two different networks space.

Maybe you are looking for

  • Thunderbird does not work

    When I click on the shortcut to Thunderbird, nothing happens. But it worked before now. I tried to stop the Avast Antivirus, but it did not help so to reboot the PC. Windows 7 (x 64)

  • Editing Contacts

    Where is it better to make changes to Contacts on the iPhone or MacBook Air. Updates will appear on both devices?  ~ SDsandy

  • When you try to run Microsoft FixIt XP, get message 'operating system not supported.

    I am running Windows XP, IE 8. I always used Microsoft Fix - it for the problems I encountered. Today, it is telling me my operating system only is not supported. Why, when nothing has changed on my end?

  • HP Deskjet 3050 j610: what is the port port HP rediscovered network monitor?

    On my trips with the 3050, I noticed a port with the description "HP network rediscovered port monitor", called CN * HX. (this name is the serial number of the printer, I discovered) My assumption is that it is somehow, which re - assigned IP address

  • Add ButtonField on BitmapFiled

    Hi all I tried to use this code to add BitmapButtonField on BitmapField but I couldn't use it. Ant one can help me? package mypackage; import com.operations.images.ImageManipulator; import net.rim.device.api.system.Application; import net.rim.device.