Authorization Wizard error (it's been over a month and stil no response from ANY representative of microsoft, excluding the automatic response)

Similar Questions

• Dear Sir/Madam I am writing about the suite Adobe Creative License peripheral non-profit in January of this year, we bought. It's been almost four months and we still have to successfully download the software on the computer, so we can really use it.

  Dear Sir/Madam

  I write about more Adobe non-profit instrument allowed Creative, we bought in January this year. It's been almost four months and we still have to successfully download the software on the computer, so we can really use it. It is completely UN acceptable. Despite many attempts and chat sessions with several of your support staff. We lost hours and hours of our precious time trying to get a working to our computer installation. The computer is a newer version than MacBook Pro bought new in January 2015. It's a sad testament to the stability of your SW if you can't creative SW runs on a Mac. I am confused with what I can do about it. Your Tech support staff clearly didn't have the knowledge to fix and the SW is defective and unusable. Is the problem of the license of the device? We can get this as another form. The last chat with one of our staff asked an email address to at least try to get additional contacts for help, but technology chat session refused to give their address. Four different Tech tried different solutions without success. What to do next? Please consult the transcript of what has past and let us know how to proceed. We are a non-profit organization. Our time and money is valuable to us. We want the use of the software that we paid for. We need a solution to this.

  Walter Wilson\

  Executive Director

  Hopesprings Corporation

  [email protected]

  It's our number of VIP

  Hopesprings Corporation

  07C5DAE501894FE5C0DA
  Date of renewal: February 10, 2016

  Try the chat support - for the still need help, click the link below? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• I am Master Collection CS6 owner for a little over a year and am slowy upgrade from older versions of programs.  Still using DW MX 2004, but now need to put in place DW CS6.  Looking at my downloaded packages I see DW CS6 anywhere.  Grateful for

  I am Master Collection CS6 owner for a little over a year and am slowy upgrade from older versions of programs.  Still using DW MX 2004, but now need to put in place DW CS6.  Looking at my downloaded packages I see DW CS6 anywhere.  Grateful for the help on it so I can start using DW CS6.  / Curt

  If you own the CS6 Master Collection and no other product CS6, then this is the product, you must install.  No one else will not activate with your Master Collection serial number.  Through the Master CS6 Collection, you install the individual applications.  Dreamweaver should be included in this Collection.  You can see all the applications of the Master Collection on the next page: multimedia design software | Adobe Creative Suite Master Collection 6

• I can't open my pictures folder. Error message says I don't have permission! I ran disk utility and found no errors. How this could have happened and how can I fix this problem? I'm the only user.

  Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.

  How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?

  Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.

  (141083)

• Firefox crashes too often. This problem has been ongoig for months, and Firefox does not respond to incident reports.

  Firefox crashes unexpectedly during the loading of pages. It does not crash on specific pages. It will crash unexpectedly on any Web site.

  I have settings set to send reports to Firefox, but I have never received a response or fix.
  

  I tried to fix the problem using the knowledge base. He has not fixed the problem.

  This http://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes can also be useful to know what gives you trouble.

• I get an error message that my audio is corrupted and I need to install a wincodec update to correct the problem. What should I do?

  Help!

  Hello Jpron1518,

  Thank you for your message.  What program do you use to listen to your music?  In regards of the Codec there is a little out there.  Most likely, you try to play something that is not supported by your particular player.  This is very common.  You need to just do a search on the web for "Windows XP (Player) Audio Codec.  You will get some choice.  Make sure you get a codec that allows you to play the file type that you are currently having problems with.  K - lite is a good Codec.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install yahoo mesengerand it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?

  I try to install Yahoo Mesenger and it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?

  Hello DennisUSMC,

  Look at the thread in Yahoo Answers.
  http://UK.answers.Yahoo.com/question/index?QID=20091129190055AA1nEsp

  He suggested to uninstall other versions of Yahoo messenger before installing the latest version. If it does not help to solve your problem, then go to Yahoo support.
  http://help.Yahoo.com/kb/index?locale=en_US&page=product&y=PROD_MSNG&PIR=qWKr06VibUkWf.Qpynpw1MiIKLy_mnW1Xh_iz.es9b2DJRQQvLHTQmI

  Sincerely,

  Marilyn

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Internet Vista Wizard error

  Out of the blue, I can't enter the internet Wizard. I've always been able to use this function, for more than a year to detect wireless connections.   Displayed message:

  The wizard cannot continue

  The wizard cannot continue and must be closed. You can try to run it later.  If the problem persists, contact your system administrator or technical support.

  When I click on Show me more details, it reads:

  Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}
  Component File[C:\Windows\system32\connect.dll]
  Error: (0x800706BA) < the="" error="" message="" could="" not="" be="" found=""> .

  Additional information:
  Could not detect Internet connectivity

  My Wifi switch is on... What is the problem and how can I fix this problem?

  Hi AngelFace0328,

  Thank you for visiting Windows Vista Microsoft answers forum.

  The 0x800706BA error code means that the RPC server is unavailable. To resolve this problem, please follow the steps below.

  1. click on start, search on start, type services.msc and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the Service list, right-click on the remote procedure call (RPC) Service, and then select Properties.

  3. make sure that the service is up and running automatically.

  If the steps above is not enough, you can try to perform a restore of the system to a date when the error arise.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David

• I try to download the 30 day trial of PS and and he says his 'download now', but it's not. There is nothing that's going on, nor is it a file in my downloads.  It's been over an hour now and I tried 3 times.  If anyone can help?

  I try to download the 30 day trial of PS and and he says his 'download now', but it's not. There is nothing that's going on, nor is it a file in my downloads.  It's been over an hour now and I tried 3 times.  If anyone can help?

  If you follow the 7 steps you can directly download a free trial here: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

  Hi all

  I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

  This is the code:

  Tell application "Mail".

  theMessages set of selection

  Repeat with thisMessage in theMessages

  the value of the theAttachments attached to a letter of thisMessage

  Repeat with thisAttachment in theAttachments

  the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

  Save thisAttachment in file theAttachmentFileName

  end repeat

  end repeat

  tell the end

  
  

  The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

  The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

  Any help would be greatly appreciated.

  Kind regards

  Beem

  If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

  Try

  game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

  on error - file does not exist

  return Beep 3

  end try

  say application "Mail".

  activate

  the value theMessages to the selection

  Repeat with thisMessage in theMessages

  thisMessage Open

  say application 'System events' to say process "Mail".

  click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

  Repeat until sheet 1 window 1 is

  end Repeat

  key sequence "o" using { control down,shift down}

  key sequence "Nutty".

  click on button 'Save' of the sheet 1 of window 1

  Repeat while sheet 1 window 1 is

  end Repeat

  key sequence 'w', using {control down} - close this message

  end say

  end Repeat

  end say

• How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.

  How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.   I have widows xp pro

  Hi Plumbbgp,

  1. what brand & model of the scanner?

  2. the scanner was working fine before?

  3. don't you make changes on your computer before this problem?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• The Upgrade Wizard error

  I ran the upgrade wizard and got through the entire process and paid the 39.99 and then I got an error saying that it was unable to process the receipt. and I couldn't do anything else but to close the screen. I was charge the $39.99 + Tax (it's on my bank statement), but I have received no email or anything else. MS Help, I called and they gave me a case number, but it is fustrating that I paid and now I have to wait. What can I do else?

  I ran the upgrade wizard and got through the entire process and paid the 39.99 and then I got an error saying that it was unable to process the receipt. and I couldn't do anything else but to close the screen. I was charge the $39.99 + Tax (it's on my bank statement), but I have received no email or anything else. MS Help, I called and they gave me a case number, but it is fustrating that I paid and now I have to wait. What can I do else?

  Please contact download technical and upgrade Support by clicking on the following link,

  You may need to go through your Bank and give only an application for involuntary transfer of funds, but this will all clear up once the issue is fixed and the application of Windows 8 calms down a bit. Please be patient and stay calm and your order will be processed in the order it was received, contact support for more info here:
  http://support.Microsoft.com/GP/ESD-support-phone-numbers
  Thanks for your time, I hope this has helped.
  -Ian

• Change the Wizard error

  We are on PT 8.53.04 and end/SCM 9.10 Windows/MS-SQL

  Change Wizard is run on the Windows Server, not the client

  Other users can run Assistant change without problem, but I get the below error after I connected, validated configuration and click "apply packages:

  

  As I said, it is run on the server and others can use it OK, so this isn't the CA configuration that is the problem. Does anyone have an idea how I can reduce this problem?

  Thank you

  2844096

  Yes, I think that this has something to do with the zip file, you try to use or have permissions to it.  the extractProject is probably trying to remove the project zip file and can't.  I would look at the file updxxxxxx.zip see if your username can read or extract properly.