Auto and manual backup of files fails

10/19, I deleted my backup of the computer and immediately ran another backup of the computer. My next regular automatic backup has not then I tried a manual backup of the files that do not have. 10/27, I ran another computer backup, but my automatic backup of files and manual tests have failed. How can I fix it?

Hello

Thanks for asking!

If I understand correctly, you are unable to perform the backup.

1. who is the operating system installed on your system?

2. have there been recent changes to the system before the show?

3. What is the exact error message when you arrive?

4. on what media you are trying to backup?

Follow the link and follow the steps provided by John R and perform the operation. Check if it helps.

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-backup-fails-with-error-0x81000019/85518840-b6f3-4b7a-a7d3-e2bbc07a2262

Follow the link and check if that helps.

http://Windows.Microsoft.com/is-is/Windows7/products/features/backup-and-restore

http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

Reply back with the results, I'd be happy to help you.

Tags: Windows

Similar Questions

  • Why downloads sometimes fail, and then the same file fails

    I just took to the part where I have to choose update of an article.

    So, I choose the Update command.

    But about 3 to 5 times, the download of the file fails.

    But this doesn't seem to have anything to do with the content of the file like 20 minutes later, the download works fine.

    So my question is why downloads sometimes fail and sometimes sail right through.

    And why, when they try to download, my network connection is a turtle.

    Welcome to the world of DPS. It can be frustrating to both.

  • Rescue and Recovery backup not file system - without error message

    I use, since 1985 the first IBM, Lenovo then. I was very happy, my next Lenovo will be bought next spring.

    But I'm just very disappointed. Daily tracks of rescue and recovery on the local disk, which later are copied to a backup drive.

    The program has never shown an error on the screen and still run perfectly-, I thought!

    A few days ago, I got a Windows error for the first time. There are a lot of missing files.
    I restored the system on the R & R and reboted. But cannot start.
    With a boot disk, I booted the system and could now see that all the Windows directory was empty!

    Unfortunately, I can not in R & R files see what files and directories contain a backup? Or can you?

    Question 1:

    So I would like to know how if someone can enlighten me.

    Then I started to investigate on what had happened. In c:-Library SWSHARE I found some files that I see is connected to R & R.
    In the engine.log file, I see R & R has written a large number of error lines, of which a part is reproduced below. File dates to 2011 and there are errors all the way

    Question 2:
    Why the program not onscreen when R & R run display errors, so that the user knows there are errors?

    Now I'm sitting at the bottom with a long nose, after 2 days and nights, trying to find a solution and restored the system several times and do not know how the file system works will come back on my PC so normally again.

    Be more happy if someone can tell me how to solve this problem.

    Here is a selection of error lines:

    Thu 17 Oct 08:41:59 ENGINE 2013: failed to send an IOCTL_FFDRIVER_ENCRYPT_OFF
    Thu 17 Oct 08:43:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
    Thu 17 Oct 08:43:40 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
    Thu Oct 17 08:43:44 engine 2013: out of CopySAM with dwRet = 0 x 00000000
    Thu 17 Oct 17:00:09 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
    Thu 17 Oct 17:00:09 engine 2013: DeleteSISAndExclude (delType 1, drive letter C, Destination 'C:\RRbackups', level 12)
    Thu Oct 17 17:01:25 engine 2013: DeleteSISAndExclude out with return code 0 x 00000000
    Thu Oct 17 17:01:59 2013 engine: br_funcs.exe - version is '04.17.20a.00 '.
    Thu Oct 17 17:01:59 2013 Verbatim: WriteDriveContents (DriveLetter ='C:', Dest = 'C:\RRbackups', level = 13, SleepCount = 0, DeviceType = 1, dwOptFlags = 0 x 00000001)
    Thu Oct 17 17:05:48 2013 Verbatim: 0x00000010883e6399 - space required before compression
    Thu Oct 17 17:05:49 2013 Verbatim: 0x00000001ef30e1bf - estimated space required after compression
    Thu Oct 17 17:05:49 2013 Verbatim: 0x0000001dae2dd000 - currently available disk space
    Thu 17 Oct 17:07:27 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\cookies.sqlite-shm' - WinRC = 0x00000000
    Thu 17 Oct 17:07:30 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\healthreport.sqlite-shm' - WinRC = 0x00000000
    Thu 17 Oct 17:07:31 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\parent.lock" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu 17 Oct 17:07:33 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\places.sqlite-shm' - WinRC = 0x00000000
    Thu 17 Oct 17:07:34 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\webappsstore.sqlite-shm' - WinRC = 0x00000000
    Thu Oct 17 17:08:28 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:08:30 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:02 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\NTUSER." DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:09 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:15 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG LocalService' and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:16 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:17 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:18 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG Settings' and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:19 engine 2013: CreateFileW failed for the file ' C:\Documents and NetworkService NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:20 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\NetworkService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:09:25 Verbatim 2013: cannot save short name of "C:\hiberfil.sys" - WinRC = 0x00000020
    Thu Oct 17 17:09:25 engine 2013: impossible to attributes of record for the file "C:\hiberfil.sys" - WinRC = 0x00000020
    Thu Oct 17 17:09:47 2013 Verbatim: cannot save short name of "C:\pagefile.sys" - WinRC = 0x00000020
    Thu Oct 17 17:09:47 engine 2013: impossible to attributes of record for the file "C:\pagefile.sys" - WinRC = 0x00000020
    Thu Oct 17 17:11:50 engine 2013: CreateFileW failed for the file "C:\Program Files\Bitdefender\Bitdefender\onaccess.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:19:49 motor 2013: jump from the C:\Program Files\Bitdefender\Bitdefender\onaccess.dat file at the request of the user
    Thu Oct 17 17:23:10 engine 2013: CreateFileW failed for file ' C:\Program Files\Common Files\Bitdefender\Bitdefender threatens Scanner\smartdb - ntfs.db' and the reason was not a sharing violation - Windows RC = 0 x 00000020
    Thu Oct 17 17:33:13 engine 2013: jump to the folder C:\Program Files\Common Files\Bitdefender\Bitdefender threat Scanner\smartdb - ntfs.db at the request of the user
    Thu Oct 17 17:37:08 2013 engine: BackupFile failed - unable to "C:\WINDOWS" BackupRead - GetLastError() returns 0x00000020
    Thu Oct 17 17:37:08 2013 engine: unable to BackupFile directory C:\WINDOWS - dwRet = 0 x 00000516
    Thu Oct 17 17:37:09 2013 Verbatim: can't get exclusive lock for the entire file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\outlook.pst" - WinRC = 0x00000000
    Thu Oct 17 17:37:13 2013 Verbatim: can't get exclusive lock for the whole of the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\Personal folders (1) .pst '-WinRC = 0 x 00000000"
    Thu Oct 17 17:37:15 2013 Verbatim: can't get exclusive lock for the entire file "C:\Privat\bendtskov-hotmail Arkiv.pst" - WinRC = 0x00000000
    Thu Oct 17 17:37:16 Verbatim 2013: can't get exclusive lock for the entire file "C:\Privat\morkebjerg-hotmail Arkiv.pst" - WinRC = 0x00000000
    Thu Oct 17 17:37:17 2013 Verbatim: WriteDriveContents exit with return code 0 x 00000000
    Thu Oct 17 17:37:25 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
    Thu Oct 17 17:37:25 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
    Thu Oct 17 17:37:26 engine 2013: out of CopySAM with dwRet = 0 x 00000000
    Thu Oct 17 22:34:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
    Thu Oct 17 22:34:39 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
    Thu Oct 17 22:34:42 engine 2013: out of CopySAM with dwRet = 0 x 00000000


  • Windows XP cannot be updated. Any help? I tried both auto and manual + software distribution 3.0

    Update security for Windows XP (KB2436673)
    Update security for Windows XP (KB2443105)
    Update for Windows XP (KB2443685)
    Update security for Windows XP (KB2440591)
    Update security for Windows XP (KB2296199)
    Microsoft Silverlight
    Update for Microsoft Silverlight (KB2477244)
    These updates cannot be installed. I really want to get these upgrades
    Also telelogiciel 3.0 tries to resettle. However, I can't add or remove programs...  I would like to get help on this because it bothers me to reboot every now and then.
    Thank you for your help

    Please answer these questions-

    1 - is the first time that the updates would not move?
    2 is installed Windows XP Service Pack 3 (press the Windows key Win+ R simultaneously.) Typewinver in the open: field, clickOK to know if there is)
    3. What is the suite of security/antivirus installed; It includes a firewall; It's current subscription; whatever it has detected the last time that the system has been analyzed with it?

    Please try another attempt to install updates now. After they fail to install copy and paste the last lines 50 or so WindowsUpdate.log in your response.
    How to read the Windowsupdate.log file

    Expert MowGreen Windows IT Pro - consumer safety

  • Stuck on the Lenovo Lenovo Ideapad start icon, then gets stuck on the repair auto and trys to repair but failing

    I recently got a Lenovo Ideapad laptop computer of game for my birthday just to find that there a hard drive problem, now, recently, he crashed and will not start, simply stuck on the logo of Lenovo starting with the loading icon, but don't start trying system restore brings to this problem and it will also be occansionally trying to fix automatically just for blackscreen and crashed about five minutes after. I don't have a Windows disc because it was before the installation with a program so I don't think that I would need a.

    Hi Timmsey,

    -You are able to boot to the desktop?

    The issue may be caused if you have changed the hardware and software of the computer settings.

    Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc.) except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download software updated driver for the device.

    You need a Windows 8 install disc to follow the troubleshooting procedures below. I suggest you connect to any other computer, and create a floppy disk to install Windows 8. Using this disk, you can perform the following troubleshooting methods. You can create the form of installation disk the steps here.

    How to create the installation media for a PC refresh or reset:

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

     

    Method 1: Start the recovery environment with installation of Windows 8 media.

    It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

    Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

    (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

    (b) select the good time and the type of keyboard .

    (c) click on repair your computer in the lower left corner.

    (d) select Troubleshooting to Choose an option screen.

    (e) click Advanced options in the form of resolution of the problems.

    (f) click Auto repair screen Options Advanced .

    (g) then choose the operating system by clicking on its button.

    (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

    Method 2: Run the restoration of the system of the Advanced Options screen.

    System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

    Follow these steps:

    (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

    (b), select the exact time and the type of keyboard.

    (c) click on repair your computer in the lower left corner.

    (d) select Troubleshooting in choose an option screen.

    (e) click Advanced options in the form of resolution of the problems .

    (f) select System restore.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Vista, backups of files on a disk of Bookshelf (1. 5 t), worked, removed some daily newspapers (household), now get backup error: 0x80070005

    I am running Vista and make backups of files on a disk of Bookshelf (1. 5 t).  Everything went well (completing daily backups).  I tried to clean up by removing some daily file backups when I received the following error message: 0x80070005.  I think that what I did is to delete the files backup complete.  Now, I can't do a backup of files daily or full without getting the same error.  Any ideas?  Is it possible I can take all of the information off my shelf drive backup and start over again - as I have had to do originally?

    Hello

    This is a forum for microsoft at the link specifically for backup questions below

    http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  • Control files and spfile backup automatic backup fails

    Hi all

    I use Oracle RAC 11 g ASM 2. My database is 2 knots RAC1 and RAC2.

    I take the RMAN database backup ASM diskgroup (FRA) and RAC1 and RAC2-mounted network file system. I have this requirement backup also outside the DSO.

    I put: set UP the CONTROL FILE AUTOBACKUP ON;
    I'm runing the node RMAN backup task 2 (RAC2)

    I am facing the error when taking a backup to the network file system. below
    Starting Control File and SPFILE Autobackup at 08-SEP-12
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 09/08/2012 18:20:06
    ORA-00245: control file backup failed; target is likely on a local file system
    How would I fix this?

    Kind regards

    Hello

    Please take a look at the document MOS * RMAN backup fails with Ora-00245 and Rman-08132 [1365484.1 ID] *.

    Snapshot must Controlfile location on a location shared between the nodes.

  • Several VSS writers fail and my backups are failling too. Need help!

    Several VSS writers fail and my backups are failling too. Need help:

    I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

    I did "vssadmin list writers" and showing several writers are in the failed State.

    I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

    I don't know how VSS works and how to solve the problem. Help, please!

    A lot of people told me they found this informative article. That's why I upgraded that and display back again.

    -------------------------------------------------------

    Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

    (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

    These drivers are:

    VOLSNAP. SYS

    NTFS. SYS

    SWPRV. DLL

    -Check the version of above mentioned MS 3 files and update using MS Hotfix.

    If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

    Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

    Some of the DRIVERS PROVIDER commonly find are:

    stcvsm.sys

    symsnap.sys

    snapman.sys

    (2) this step is performed only when we find him

    VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

    In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

    HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

    This key will be automatically recreated when you restart and writers should return to the stable state.

    The writers pending the completion status is not a problem. It's also good that Stable.

    We can do on the Server 2003, 2008 and 2008 R2 OS as well.

    However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

    For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

    Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

    (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

    If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

    (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

    Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

    To do this: start the registry editor.

    HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

    One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

    Now when we do vssadmin list providers, we will see only the default Microsoft provider.

    I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

    case, if we get rid of the supplier, then the issue is resolved and not re occurs.

    -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

    That's why to engage respective software tech support for further assistance.

    (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

    For example:

    If we take a snapshot of C: then the storage area should be C:

    We are changing that, if we do not have enough free space (at least 300 MB) free.

    We can click with the right button on the volume, goto the cliché tab and change it accordingly.

    Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

    We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

    In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

    HKLM/System/CurrentControlSet/Services/Volsnap

    Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

    300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

    Ref: http://support.microsoft.com/kb/826936

    (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

    to be free.

    Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

  • make backups of file for recovery and installs custom

    I have a set of recovery disc for Vista Ultimate.  After you have installed Windows 7 Ultimate can I create another set of recovery discs at the time hardware/software failure?

    Hi Bob494,

    Thank you for visiting Microsoft Answers.

    To backup your files

    1. open backup and restore by clicking the Start button, click Control Panel , click system and Maintenance and then clicking backup and restore .

    2. do one of the following:

    ·         If you've never used Windows Backup before, click set up backup , and then follow the steps in the wizard. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    ·          If you have created a backup before, you can expect the regularly scheduled backup to occur, or you can manually create a new backup by clicking back up now . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Please visit these links for more information on back to the top:

    1.       1.   http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

    2.      2.  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files

    3 3.  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

    You can restore backed up files lost, damaged, or accidentally modified versions. You also to restore files individual, groups of files, or all files that you have saved.

    For more information about how to restore the backup files, see these links:

    1. http://windows.microsoft.com/en-us/windows7/Restore-files-from-a-backup

    2. http://windows.microsoft.com/en-US/windows7/What-is-Recovery-in-Control-Panel

    This link will tell you about the system recovery options in Windows 7.
     
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Kind regards

    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to make a manual backup, so I have redunant copying my files

    To ignore the story set in the last paragraph
    I have thousands of pictures on my laptop. I also have another, my desktop computer, a significant amount of disk space that I use for my backup
    I prefer manual backups as I want to use the content on both computers. I change my daily photo library, remove some photos that I need more, add new ones, so at the end of everything I have thousands of pictures on my laptop, most which are saved on the desktop, there are also a few new on my laptop that I would like to copy on my desk, AND there are a few elders on the desktop are no longer on the laptop (that I would like to delete)
    To say the easy things, all I want to do is make an exact copy of the photos on my laptop to my desktop folder.
    The only way I found to do this was to copy the whole folder to the desktop and then remove the old version of him
    If I just copied the new version of the folder just above that older new photos get copied but older are deleted
    Redundant comments: how to make an exact copy of a file in, say, another partition that has an older version of this same folder, which means that there is some files (in the older version folder) is no longer, I need and would like to get their removal, and other files that are already present in the two cases, I want to NOT crash. I can't do it manually because there are thousands of files and hundreds of files! Can anyone help?

    In addition to the tool to try it, I forgot to mention that Windows Live Sync app keeps files in constant sync, so if a file is changed, it will distribute the latest version of all locations synchronized.  But if a file does not change, it will not re-synchronized.

    However, there is another tool that is a bit more customizable and can be run on command (there's even a command line command so you can put it in a batch file or scheduled task).  It's Microsoft SyncToy.  Here are some resources that might interest you:
  • ORA-00245: backup of control file failed; target is likely on a local file sys

    Hello

    our CARS (Linux 11.2.0.3.0) is relatively new and we are still on the acquisition of experiences with this system...

    At the start of the backup with RMAN, we get the following error:

    From control file and SPFILE Autobackup 4 July 12
    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-03009: failure of command of file control and SPFILE Autobackup on channel ORA_DISK_1 at 04/07/2012 16:41:48
    ORA-00245: backup of control file failed; target is likely on a local file system

    The reason for the error is clear ORA-00245 - in a CCR environment, the snapshot Controlfile location must be on a shared location.

    When running the RMAN command "show all" on each node, we get
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD021.f'; # by default
    for the #1 node
    and
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD022.f'; # by default
    for the #2 node

    When using a shared location for the snapshot Controlfile make us still need 2 different names for this configuration file?

    CONFIGURE SNAPSHOT CONTROLFILE NAME to ' / < shared location > / snapcf_PROD021.f'; # by default
    for the #1 node and
    CONFIGURE SNAPSHOT CONTROLFILE NAME to ' / < shared location > / snapcf_PROD022.f'; # by default
    for the #2 node

    Or should set us up as a single snapshot Controlfile?

    RMAN installation for "CONFIGURE SNAPSHOT CONTROLFILE NAME TO... "must be changed on both nodes - correct?

    I hope my question is clear enough--any help will be appreciated.

    Rgds
    JH

    Published by: VivaLaVida on 05.07.2012 11:41

    The controlfile is shared on the RAC database and having the backup of any node to shared mount point would meet the requirement.

    Configure snapshot controlfile name to ' /snapcf_PROD0.f';

    Anand

  • I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

    I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

    I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

    Please advise! Thank you! Sincerely, s

    If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

  • differences in the use of a backup Favorites file ".json" and a file of bookmarks '.html '.

    Hi all
    What is the difference between the use of a backup Favorites file ".json" and a file of bookmarks ".html"? It seems that both of them do the same job. If this is the case, then why there are two options (.json and .html) to do the same job? If this isn't the case, then what is the reason for the availability of the two options and how are they different? Although I read the material, it didn't quite clear form me again. Please be so kind enough to elaborate on the question so that I can get a clear understanding of their good use (s).
    Thank you very much in advance for your time and skills

    Hello

    See questions/684284

  • How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

    The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

    None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

    Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

    Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
    If this is not the case, can you?
    If so, make a copy and save this folder just in case.

    If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
    Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
    But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

    View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

    Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

    Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

    With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
    Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

  • How to manually backup and restore iphone content (texts, contacts, data apps) and apps?

    How to manually backup and restore iphone content (texts, contacts, data apps) and apps?

    What do you mean by "back up manually? Do you mean back up some data like contacts, texts selectively?

    Or you don't want the automatic upward, instead, you want to manually create upward?

Maybe you are looking for

  • Missing for Satellite Pro 4280 BIOS file

    Download BIOS files for the series 42xx Satellite Pro (more precisely the 4280 in my case), I get a nice zip download. Who has the two executables to perform the BIOS loading and a readme file in the PDF. But any binary BIOS.Anyone have any idea wher

  • Space exceeded profile

    PC very slow and unable to restart or disconnect because error with profile space.  Error message indicates that we have exceeded the space profile by...  Have the feeling that makes computer running extremely slow.  Any ideas?  Thank you

  • Desgin a theme for my application

    Hello everyone, I am building a storyteller application and I am looking for a way to desgin my request to make very beautiful children, I desgin of the application interface. for example, the main menu of the application, the start page, as games in

  • ESW 520 8 ports - firmware update

    Hello We have an ESW 520 8 ports currently on the 2.1.1.19 firmware version (version of boot 1.0.0.07, VID V01) - serial number CBT15100AN2 The latest version of the firmware is 2.1.1.21, that we have downloaded and through the Maintenance, update th

  • Black screen after login screen. Possible graphics card issue?

    Problems to show after the desktop connection screen. Just the mouse pointer. Everything works in safe mode. I have a graphics card separate installed and it worked flawlessly during the initial installation. I think there was some windows update tha