Auto focus does not work in the creative modes

Similar Questions

• Why my auto focus does not work like Julieann K does in his tutorial

  I tried to use the auto focus selection, as shown in the tutorial by julianne k and it does not work.

  After reading your response, I realized that my photo file was huge, so I reduced the entire file significantly down for something like 8 x 10 and it worked fine.  My account was just too big. I tired of small files, and the update worked.  the file may not just be very big. I thought that after you suggested I go to 8-bit. Thanks David

• Auto focus does not work anymore

  Hi all

  The autofocus on my EOS 50 d has stopped working. I have tried different lenses, checked the settings (it is not in manual mode), cleaned the contacts, etc.. One day, it worked very well, and then stopped.

  When I try to focus, the sounds of the lens as if he tries, but going fuzzy instead. I'm so sick about it! Some lenses are only a year and most are IS. I tried to turn the EAST also. Nothing helps.

  Does anyone have any suggestions for me? Thank you!

  The camera or lenses have never been abandoned or ill-treated.

  Thank you very much in advance for your help,.

  MB

  Generally, when the AF sensor goes bad or is 'very' dirty, the lens will hunt for AF.  I take your camera to a service center and cleaned him up.  I bet that this has never been done. Right?

  Are - what you happened to select a point of unique focus by mistake?  Try to reset the camera by default before you do anything.

  Whenever something happens out of the ordinary, the first thing to do is to reset the camera.  Always do the easy things first.  Then things cheaper.

  Get a new battery of Cannon and make sure it is loaded completely.  The Chargers go bad too.

• Approvals of auto Service does not work after the Update Rollup 2.3 HRMS on Oracle11i

  Custom approval workflow for self-service has stopped working and is auto approving after HRMS update rollup 2 and 2 on Oracle 11i. Can someone advice on what may be the cause of this problem.

  Hello

  You have customized by changes in oracle seeded workflows and not to change his name. If Yes, then it is not supported patches way and oracle are quite capacble of replace your coustomization.

  Oracle provides a way for the customization, serach metalink support and find out how to do it.

  You can get the list of object crushed by the patch by OAM or by running the fix in test mode.

  If you have backup of these workflows, you can replace it.

  Thank you
  JD

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• Auto-Sleep does not work then in the lock screen

  As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?

  Hello

  A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.

  Change power management and check.

  Power plans: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• Sansa Fuze does not work with the Xbox 360?

  I know that the console is capable of playing a MP3 player through it, I could do my job as Creative Zen. I don't understan why it does not work with the "rocket", the interface looks more simple on the surface of things. And I'm sure it doesn't because I don't have a HARD drive for my Xbox, it was working fine before.

  The reson I am, I wanted to know because I wanted to know the other ways of playing my rocket while listening. the kool on my expirimentation thing is I found that the Xbox will charge my rocket when it is off and I can listen at the same time. I also found that my Playstaion 2 will work also in this copacity all-in-on.

  Basically the Auto setting works well with the XBox.  Select settings > USBMode > MTP or MSC.

  With PSG, you can even play content protected by DRM rockets (IE Rhapsody) on Xbox.

• Auto-rotation does not work on my WT8-B-102

  Hello

  I have restored my Tablet WT8B-102 and my auto rotation does not work. I instaled all the drivers and the nohing.

  How can I fix it?

  Hello

  You restored your device with the recovery image?
  I mean do you use your WT with factory settings?

• using Xp the sd popup does not work on the insertion of the sd chip into the slot, how can it be repaired?

  normally on the insertion of the sd chip a pop-up dialog box appears asking what route you want that information to sd etc. This pop up does not work and the only way I can get into the sd information is to search on D:, then click on 'Open' please notify if MS can restore the pop up facillity?

  Hi JohnWack,

  Welcome to the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  According to the description of the problem, I understand that you do not get the AutoPlay option when you insert the SD chip into the Windows XP computer.

  -What do you mean by "what route you want to than the sd information etc."? Are you referring to the auto play feature?

  Try these methods.

  Method 1

  Double-click on "My Computer", right-click on the drive you want to Auto play and click 'properties '.

  Click the 'Auto play '.

  Method 2

  Steps to enable AutoPlay.

  1. start, click run, type Gpedit.msc in the Open box, and then click OK.
  2. under Computer Configuration, expand models of administration and then click System.
  3. in the settings pane, do a right click Enable Autoplay, and then click Properties.

  For your reference.

  Windows XP does not recognize a secure digital card when you reinsert it after you remove it
  http://support.Microsoft.com/kb/812661

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Need Adobe XI. DC does not work with the plugins I use.

  I'm on a Mac and I need Acrobat XI as DC does not work with the plugins that I use at work. We have a subscription to the CC. I downloaded the software XI from here: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html but it asks for a serial number. I followed the steps on this page about what to do if you have a subscription, but this brings me to a page that asks you a redemption code to activate my subscription. My subscription is already activated. Is there a way to install XI without needing a series/redemption code?

  Update: I spent 2 days looking how to get this resolved. Of course, 5 minutes after I ask this question, it happens to me on this: https://helpx.adobe.com/content/help/en/creative-cloud/kb/acrobat-dc-uninstalls-acrobat-11 .html , that solved my problem and my installation began through the application of CC desktop, rather than a separately downloaded .dmg file as before. Note: After clicking on the button 'Download Adobe Pro XI', next steps called "Adobe DC", but the end result is an installation Pro XI.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• AutoComplete does not work on the address field.

  AutoComplete does not work on the address field. This means that the completed form is missing from the address. What is special about the address field and why doesn't autocomplete work? I have NOT opted for "don't follow it.

  http://www.thepetitionsite.com/TakeAction/918/708/047/

  Hi robmm76. I looked at the link you provided. It seems that the reason why AutoFill does not work for the address field is because of the way this field has been programmed on the site. It has been programmed to make type you part of your address and click on the right pair and it would then fill in city, State and zip code. If this field is just a special case.

  I hope this information answers your question. If you need more information or help please do not hesitate to reply to this reply.