Auto Installer error msg when you try to install security pack 1-windows vista premium home edition

Similar Questions

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• 80070057 error code when you try to install Service Pack 1

  I try to install Vista Service Pack 1 and when I try to install it either online or manually by downloading the entire 400 + M file, it will start and show 10 minutes later the installation failed with code 80070057 error and.  I can't find this code on a Microsoft Web site reference.  Any idea what's going on?

  Thank you

  A long shot, but try it (even if it's for Windows Server 2008). Stop mentioned serivce and run Service Pack 1 Setup.

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Error code 8024200d when you try to install service pack 2 on vista 32-bit

  SP2 and run system update tool update always fails.

  Hello

  **********************************************
  Rename the folder Catroot2 rename the Catroot2 folder (Windows XP and Windows Server 2003 only) and then try to install the program again.

  Note Skip this method if the operating system is Windows 2000.

  To rename the Catroot2 folder, follow these steps:

  1. Click Start , click run , type cmd, and then click OK .
  2. At the command prompt, type the following commands and press ENTER after each line:
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  3. Remove all tmp*.cat to the following folder:
     % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

     If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  ***********************************************
  Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 /u softpub.dll
     regsvr32 /u wintrust.dll
     regsvr32 /u initpki.dll
     regsvr32 /u dssenh.dll
     regsvr32 /u rsaenh.dll
     regsvr32 /u gpkcsp.dll
     regsvr32 /u sccbase.dll
     regsvr32 /u slbcsp.dll
     regsvr32 /u mssip32.dll
     regsvr32 /u cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  3. Restart your computer.
  4. Click Start , click run , type cmd in the Open box, and then click OK .
  5. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 softpub.dll
     regsvr32 wintrust.dll
     regsvr32 initpki.dll
     regsvr32 dssenh.dll
     regsvr32 rsaenh.dll
     regsvr32 gpkcsp.dll
     regsvr32 sccbase.dll
     regsvr32 slbcsp.dll
     regsvr32 mssip32.dll
     regsvr32 cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
     Restart the computer.

  ***********************************************
  Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands, pressing ENTER after each line:
     attrib s h % windir %
     attrib s h %windir%\system32
     attrib s h %windir%\system32\catroot2
     output

  ***********************************************
  Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

  To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

  1. Remove all tmp*.cat of the following folders:

     systemroot \system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

     systemroot \system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  2. Delete all the kb*.cat files in the following folders:
     % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
  3. Remove all the oem *. * files in the % systemroot % \inf folder.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  5. Restart the installation of the patch failed or the installation of the service pack.

  ***********************************************
  Empty the software distribution folder

  1. Click Start , click run , type services.msc and click OK .

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.msc and then click run as administrator .

  2. In the Services (Local) pane, click automatic updates , and then click stop .
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. In this place, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates , and then click Start .
  7. Restart the computer, and then run Windows Update again.

  ***********************************************

  It may be useful

• Error 2, when you try to install the language via windows update pack

  My Windows Vista Ultimate 64 bit SP1 of traditional Chinese version, has been updated to SP2.

  Windows update for security update and update .net is fine.

  Original title: [Vista Ultimate Language Pack] Fail to install through Windows Update language

  I tried to install English and simplified Chinese language through Windows Update, but Vista fail to install them and for reporting error 2.

  I tried to clean boot and run Microsoft Fix It to fix Windows Update; Rename Windows\SoftwareDistribution and rerun Windows Update; Run sfc/scannow; disable the anti-virsus (Microsoft Security), firewall; Run dotnetfx_cleanup_tool; None of the method solves the problem.

  Help, please.

  You also backups of ALL the changes that Advanced SystemCare and Cleaner of registry CCleaner have or had ALWAYS made to your computer? [1]

  If this is not the case, only a clean install of Windows can solve your problem now IMHO. No, a repair installation [upgrade on-site AKA] do not solve this problem.

  ================================================================
  [1] your misguided use of all registry cleaners certainly plays a role here. TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Receive error message when you try to uninstall a program/game (Windows Vista)

  I have 2 games and a program I'm trying to uninstall it from my computer, but I get errors on each of them.  I have used Windows Vista to uninstall programs and features (Add/Remove).

  Here are the games/programs:

  1st:
  Chocolatier 2 secret ingredients

  Error: The file "C:\Program Files\Chocolatier 2\ReflexiveArcade\unins000.dat" does not exist. Impossible to uninstall.

  2nd:
  Hidden Mysteries Titanic

  Error: Could not open INSTALL. LOG file.

  3rd:
  Print Photo Pro Shop

  Error: The log "C:\PROGRA~1\BRODER~1\THEPRI~1\DeIsL1.isu" file is not valid or that the data has been corrupted. Uninstallation will not continue.

  I want to delete the 2 games inorder to reinstall (I get error tring to open them too).

  The program of the print shop that I just deleted, I've never used and don't plan to use it.

  HOW?

  I saw that others suggest using a program called Revo Uninstaller Pro unstallation, http://www.revouninstaller.com/

  But I'm not sure this safe or will work.

  Now that I got everything that I'm not very good at using the computer except to simply add a program, and I will need detailed instructions to do it myself.

  Thank you very much!

  Hello
   
  This happens usually if a part is missing or damaged.
   
  To properly uninstall any program from your computer, it is a Microsoft tool 'Windows install cleanup utility' that can be used to uninstall any program on the computer successfully.
   
  Visit the following link to download "Windows install cleanup utility:
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
   
  Save the tool on the desktop and try the following steps to remove the programs required successfully.
  1. double-click on the saved file and follow the instructions in the wizard to install successfully.
  2. Click Start, click all programs, and click on the utility Windows install cleanup to start.
  3. in the list of elements and programs, select the program you want to remove and click Remove.
  4. once the program is removed, restart the computer so that the changes take effect.
  You can access the tool in the start menu and remove other programs successfully.
   
  NOTE: Many program manufacturers have their own program removal tools available on their Web sites. Visit the program manufacturer's Web site and check the removal tools.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1303 when you try to install Adobe Reader on Windows 7. The error message says to log on as an administrator. Yes, I did. It does not work.

  I am trying to install Adobe Reader with Windows 7.  The installation fails with an error 1303 tent access to c:\Program files (x 86) \common files\adobe\1.0.   I tried to log in as an administrator. No luck.

  To see if it a Windows problem or an Adobe issue, see if this PDF Reader installed.
   
  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/
   
  If so, I would stick with it. Foxit is much more user friendly Windows.

• Windows 7 64 x error 80073712 when you attempt to install "Security Update for Windows 7 for x 64-based systems (KB2631813).

  I recently did a clean install of Windows 7.
  At the end of (almost) all available system updates I find myself with one that does not, install "security for Windows 7 for x 64 systems (KB2631813).

  Whenever I have try I get error code 80073712.

  I was also interested in trying the free update of Windows 10, but it seems that I need the update of the system failure should be installed until I'm able to try upgrading Windows 10.

  Hi Rob,

  Thanks for posting your query in Microsoft Community.

  I suggest you to refer to the troubleshooting of the methods provided in the article below and check the status.

  Windows Update error 80073712

  You can also see suggestions in the link below to upgrade to Windows 10.

  How to: solve the Setup and stop common mistakes during the Installation of Windows 10

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Receive Visual C++ error message when you try to install HP deskjet D1600 in Vista

  error Microsoft Visual C++ will not let me install my new printer HP deskjet D1600

  * original title - trying to install new printer HP *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3811075&LC=en&cc=us&DLC=en&submit.y=9&submit.x=7&lang=en&cc=us

  Above HP link uses drivers for it.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3811075&LC=en&cc=us&DLC=en&submit.y=5&submit.x=9&lang=en&cc=us

  Installation/upgrade in place, manuals, how to use, etc., to the above link.

  For any other problem with your new printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=3811075&lang=en

  See you soon.

  Mick Murphy - Microsoft partner

• I get error code 80042306 when you try to install Service Pack 1 for Vista Business

  Am linking to get my eccentric Vista to work properly. Try to get the notice of failure load and obtaining of the SP.

  alabamacoasty,

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  System File Checker

  The system update tool

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

  Original title: initialization error 112 Setup

  1995 installed Kodak DC200/DC210 Zoom camera software.

  Explanations with the error: decompress the program files not all charges.

  Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

  I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

  Thank you

  Destry

  PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

  D.

  Hi Destry,

  1 windows operating system you are using?

  If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

  For more information, please visit the following links:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

  http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

  You can try to install the device in Windows XP compatibility mode and check.

  Check out the links for more information:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Also read the following article:

  Error 112 Setup Installation Error message"when you try to install a program

  http://support.Microsoft.com/kb/326678

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.