Auto-pause for cycling

Similar Questions

• Auto-pause the activity

  iWatch activity - please confirm there is no auto-pause function.  Whatever activity I have to manually, select pause and remember to restart each time.  Some competitors have auto pause that implements a temporary cessation of the program when deleting under a certain threshold.  For example, biking or running, stopping or going to less than 2 mph.

  Is this a future update?

  Thank you.

  Mike

  Hello

  At the present time, it is normal to have to take a break or at the end of workouts manually.

  Under watch OS 3, the software update will be released on September 13, training app can automatically pause and resume execution of the workouts as the case may be.

• Auto Pause... y at - it something to make it work?

  Hi all

  This is one of my pet peeves on the MY... auto Pause is completely flaky... If you look at this cahrt, it is said, I'm pretty much 0 mph for minutes at a time... That's because it takes 30 seconds for the device out to don't move not... Multiply it by each fire drwabridge / a bike ride, and your stats are compeltely Jacked up... if I try to hit the "pause" button, while at a stoplight, he argues with me and immediately autoresumes... even if I stopped...

  I'm guessing that there is something out there... Everyone? (it's worse still running)

  

  Auto pause is currently using GPS, not the accelerometer, which is a part of what you are a statement. We're going to make some adjustments in the next update so that a manual break replaces the auto-pause feature - is no longer "will tell you."

• Is there a way to auto-pause audio halfway in a slide?

  Let me start by acknowledging - honestly, I'm not an expert.

  I'm the challenge is that I need to take a pre-recorded video (duration 30 minutes) and create an e-learning using the audio from the original videos.

  Recording went well, but the timing, as you can imagine, is disabled.  I'm looking for is a way to auto-pause a slide after some time has passed.  Something for audio similar to most of the objects. Something like:

  Slide: On the entry - audio playback

  Break after x.y seconds

  Then I can insert an object with a fast action "audio playback" and "continue". I tried to use a break in the slide itself, even if the breaks of the slide, the audio does not work.

  It's the auto-pause. I don't want the user to have to click or interact to pause audio. Can I publish in .swf if questions, I'm not sure of this.

  I use 7 Captivate.

  Very please, any help would be appreciated.  I'll take workarounds. Something to keep me from firing the remaining hair on (and I hope not to re-record the presentation by clicking pause whenever there is a change of wording/slide on the recording).

  Such objects boxes click buttons, entry fields of text and smart forms disguised as buttons will be paused the slide. You can set up the break point to be wherever you want. But the problem is a pause in the audio.

  My thought is that perhaps you edit audio so that it contains only the bits you want leading to point break. Then on the object that you use to make a break, maybe you have a tip action that reveals an attached with audio hidden object game. You would then edit the audio so that the rest of the audio is present and attach it to the hidden object. Then, when the peak action is triggered, the audio would play.

  See you soon... Rick

• How can I stop auto correct for some words?

  How can I stop auto correct for some words?

  Here's a great explanation and solution:

  mamadi http://coolestguidesontheplanet.com/turn-AutoCorrect-OSX-Mac-mail-Skype-10-9-MAV.

• How can I disable Auto Grow for all structures in memory?

  I inherited a ton of code LabVIEW with Auto Grow enabled for all structures (loops For, case of Structures, etc.). There are thousands of these structures.

  How programming (or other) turn off Auto Grow for all structures in memory?

  I met the same problem. I prefer not to use auto-grow, but naturally, it is in most of the code I inherit. In any case, this VI should solve the problem. I found it on these forums earlier.

• DAQmx how to control the level of tension AO paused for a relaxing break?

  I have an application where I need to generate a waveform of a fixed frequency (~ 200 kHz) and the amplitude, but for differing them burst lengths and different lengths of time between bursts. These bursts and these delays are controlled by a line of DIO to generate the relaxing break. I also need to have the output voltage analog voltage controlled between bursts of waveform. I explored using various trigger options, the break seems to be the best solution, but I'm difficult to control the particular point of the end of the waveform during the break occurs to make sure that the break is at the same specific voltage when the wave is hidden. I try to adjust the position of the example 'Analog output Pause for the periodic Signal with regeneration on specimen' but cannot get regular tension during the break I'm after. I use a card Series DAQ. X is there a simple way to pre-set the tension that will be broadcast during the paused state when using a relaxing break? I was not able to find it in the examples or documents. I can't use the code of reference AO set example because it is a software-driven and does not fit into the model of schedule I need to generate.

  Hello

  I don't think there is a way to establish a certain level on the analog output, based on a relaxing break.  I watch using a redeclenchables task analog output and do every hour of beginning to the required voltage.

• cannot turn off auto-renewal for any reason any

  I can not turn off auto-renewal for any reason because when I click on change it takes me to a page asking to put a code that was sent to my email and I'm not sure yet what the good e-mail even if I changed the security evidence and I'll go and contact Xbox , but this is a last resort

  Your best bet would be to contact Xbox support or use the Xbox forums.

• HP Pavilion g4-2235dx Notebook PC stuck on auto repair for a month now... Please help...

  so my laptop HP Pavilion g4-2235dx product number: C3Q50UA has been slain in automatic mode of repair for like a month now... it goes not far than this screen... the day it happened first I booted up & it real quickly flashed a blue screen that says my computer needs to reboot so itll restart itself for me then it rebooted & went to the screen hp for 10-15 minutes , then went to the automatic preparation of repair screen for about 2 hours, then the screen comes to have dark & remained like that all night... the next day I turned off the laptop & started again & it would be on the screen hp for a long time & id farm & turn on again, then he would start, restart itself then go to auto repair. If I stop it on the page of sutomatic repair then it would be just cranking up the hp screen & nothing else but if id shut down on the hp screen & turn it back on go to repair automatic page... back & suite back & rear returns & suite for days... Finally once a week or so, I gave up... i left on the page of auto repair for about 2 days directly plugged in so he would die just in case he might just need more time but 2 days was too long so I finally unplugged it & left on this page until the battery is dead & haven't touched since... Ive read some of the other posts on the loop of auto repair & what to do, but I don't want to lose all my stuff on the laptop as my images/videos(thought i saved them to skydrive but apparently i didn't complete the whole process to access my stuff from another windows 8 device)... I bought the used laptop & the warranty has already expired... any installation of windows 8 flash disk/drive. I have no recovery disk. so I have no way to replace my OS or recover my data that are already on this laptop... is there something I can do to get out of this dealie loop of auto repair without an installation/recovery disk/flash drive?

  You'll need a Windows 8 rescue flashdisk, HP usb recovery media or disk recovery in order to access the safe mode and the Startup Repair. The cost of a recovery of HP USB is not that much to around $ 30.00 USD. You can also ask a friend or relative whose computer has the same BONE to make a recovery of Windows 8 key for you.

  If you want to recover data from the hard disk before performing any repairs more, then you will need to remove the hard drive. You have the choice to start the installation in a usb enclosure, using a usb cable to power\sata or install temporarily to with a sata available on a desktop at home.

• Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

  Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

  If you have a MONTHLY subscription, not an annual subscription with monthly payment, you can stop/start according to the needs

• Auto-increment for alreay column in existing table DB

  Hello

  We have a DB table with column of type Number. Table is already to have contained huge. Now, we want to have the auto-increment for this particular column.

  From now on, I created this table-based entity/view objects. Created attribute from entity sequence and update as follows.

  Create the GLOBAL_SEQ INCREMENT OF 1 SEQUENCE START with 1;

  Updated the expression of the attribute of the entity with logical next

  (new oracle.jbo.server.SequenceImpl ("GLOBAL_SEQ", object.getDBTransaction ()) .getSequenceNumber)

  When I tried to create a new line by using "Browser Oracle Business Component", the sequence fixed 0,1, 2... etc. But there are lines with these values in this column.

  But we want to create new line taking into account the maximum value of the column and the increment of 1.

  It would be great, if you can suggest an idea on this issue.

  Thank you

  MSR.

  You can leave to start the sequence with any number you like. For example, you can first make a max (id) of the table selection and the beginning of the sequence value max + 100...

  Timo

• How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene?

  How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene? There are buttons for other scenes in these images. The below works well until I got to the last frame of the scene, then he goes to the next scene and plays. How can I make one loop continuously.

  Stop();

  var: timer = new Timer (20000,0); / / <--

  timer.addEventListener (TimerEvent.TIMER, timerHandler);

  Timer.Start ();

  function timerHandler(event:TimerEvent):void {}

  this.nextFrame ();

  or if you want to jump for example 5 executives

  this.gotoAndStop(this.currentFrame+5);

  }

  Thanks for any help.

  If you want to stop your timer, use the stop() method:

  Timer.Stop ();

  PS when you use the adobe forums, please check the useful/correct, if there is.

• Could not execute auto Check for DISPLAY

  Aloha!
  
  I am about to install 11 g R2 on OLE5 and I put the variable display using ' DISPLAY = < computer name >-: 0,0; Export DISPLAY '. When installing ".» / runInstaller "im having this error"Could not execute auto check for display... »
  
  Can I cancel the mention of the above command?
  
  Thanks for the help.
  
  Hades

  Salvation;

  Close your shell to reopen a new

  Respect of
  HELIOS

• Text input does not pause for user input

  If all goes well, a simple question:
  
  Brief:
  I have a box of text on a page of simulation of connection that do not pause for user input. Instead, it just displays as if writing be typed and then continues.
  
  Question:
  How do I get this thing to pause and wait for the user to enter the login id?
  
  Detail:
  Version 1.01.1418 (full version), platform PC of Captivate
  Text entry box
  1 entry correct listed: "sa".
  Success = continue
  Display: Rest of slide
  Break after: 0.1 sec (varied this having any impact on a break for the entry)
  No transition
  
  DRM for advice.

  This must have been a dark note somewhere in the documentation:

  You can not interact with the page if preview you with play this slide (F3). The other preview modes to the text entry area work correctly.

• Different auto update for Vista and Windows 7

  Computer my wife, Firefox under Windows Vista, has been updated this week to Firefox 7.0. Mine, Firefox running on Windows 7, however remains to 6.02. When I pull down help / about it says "Firefox 6.0.2 is up-to-date." I know that I could download 7.0 manually and install it, but I wonder why Auto-Update didn't get it. Two of us are on the output channel.

  Updates to Firefox 7 were off early yesterday due to a bug related to disappear during the update of modules.

  http://blog.Mozilla.com/addons/2011/09/28/issue-discovered-with-Firefox-Add-on-upgrades/

  A Firefox version 7.0.1 for this problem should be available shortly.