AutoCAD LT 2007 and Microsoft Optical Mouse 3000 and pan

Similar Questions

• Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

  Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

  My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

  

  Hi faignard,

  Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

  I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Please answer us on the State of the question to help you further.

• Microsoft Wireless Notebook Optical Mouse 3000 does not illuminate.

  I 1 Microsoft Wireless Notebook Optical Mouse 3000 mouse model, but now the mouse still works fine but the transceiver with to connect does not! When I flug in there in my computer the light say not keen to see it was connected, so the mouse can does not, can someone get this problem? Sorry for my English!

  hzonmd,
  Thank you for visiting the Microsoft Answers community forum.

  Here is an article that has several for your wireless mouse troubleshooting steps and should help you to solve this problem:

  The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently
  http://support.Microsoft.com/kb/838398

  Please try these steps and let us know if you need additional assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My optical mouse 3000 does not work even if the red light is on in the background

  My optical mouse 3000 does not work even if the red light is on in the background

  Hi Russell,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the optical mouse 3000.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?
  3 is confined with any specific application?

  I suggest you to see the steps in the following Microsoft article.

  
  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  We would be more than happy to help you if the steps above did not solve the problem.

• Notebook optical mouse 3000 does not totally work with Windows 7

  laptop optical mouse 3000 not totally work as it is in win 7 64 bit, but very well under win xp.

  Hi, a problem with my laptop optical mouse 3000 with windows 7 64 bit.

  the problem is that I am not able to scroll in the yahoo mail Inbox and in the Favorites of google chrome, but others such as scrolling through site Internet is fine. Makes me kind of stay away from windows 7 and stick to windows xp.
  Another thing, it was that the experience with movement/pointer speed in windows 7 64 bit was totally different. experience with the speed of movement/pointer is at the time when I uninstall the driver and use the default windows HID-compliant driver.
  all this problem never encounter in windows xp.
  I doubt it could be the driver problem.
  I tried to reinstall windows, reinstall intellipoint, reinstalling a newer version of intellipoint (7.10.344.0), but it does not help.
  What should I do now? wait for a newer driver for notebook optical Mouse-mouse 3000?
  I hope someone could fix that.
  Thank you!

  Hi chun liang,.

  Possible several steps for troubleshooting your problem, see the following article:

  http://support.Microsoft.com/kb/303091

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Notebook Optical Mouse 3000

  I wish the scroll key to send a double click when you press on, as did my wired mouse. I don't see this as an option. Any help?

  Hi William,.

  I understand that you need the double-click feature using the mouse scroll wheel.

  Follow these methods and check.

  Method 1: I suggest you to do the following to enable the feature.

  a. use of the mouse you want to configure, start IntelliPoint.
  (Click Start, point to all programs, click Microsoft mouseand then click Microsoft mouse.)

  b. in the list of the button wheel , set up to use the double-click.
  Save the changes.

  Reference: http://www.microsoft.com/hardware/en-in/help/support/troubleshooting/mouse/mouse

  Method 2: If this does not help, reinstall the software from the link, you should be able to get the required functionality.

  I suggest you check out the link to uninstall the IntelliPoint software:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To install the Intellipoint software, see the link:

  Install IntelliPoint software and the mouse

  http://support.Microsoft.com/kb/258785

  http://www.Microsoft.com/hardware/en-us/d/wireless-notebook-optical-mouse-3000

  Follow these steps and let us know if it helps.  If the problem persists, answer and we will be happy to help you.

• Impossible to use the Microsoft Optical Mouse right click features

  Original title: my microsoft optical mouse: right-click did alow all functions? He did that all the time I had to make the decision to link msn/century.

  I now have to Cntl C allows you to copy

  Hi SallyAndrew,

  Thanks for asking this question to Microsoft Community!

  I understand that you can not use the right-click on the optical mouse. I'm sorry for the inconvenience caused to you. Don't worry; We got some troubleshooting methods in order to get this fixed number.

  He would be grateful if you could answer these questions as well.

  1. What is the number of exact model of the mouse?

  2 is the issue limited to a particular application?

  3. did you of recent changes to the computer before the show?

  4. what version of Windows operating system is installed on the computer?

  I suggest to perform the steps in the following article and check if it helps.

  Method 1: Fix a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Method 2: Troubleshoot failures in the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Microsoft Mobile Mouse 3000 lock as I am scrolling

  original title: Microsoft Mobile Mouse 3000

  I have this mouse model 1359 and he became addicted to my desk at work. It doesn't seem to work well at all and was wondering if it the wrong kind of mouse for a desktop computer. It crashes as I am scrolling and I spend the time stirring my mouse to do by moving and it also seems to jump over things. It happened on multiple computers. Ive tried to move the connection to a different usb port and it doesn't seem to help. Very much a pain, please help

  Hi KrystalNicolaides,

  ·         Did you the latest changes on the computer before this problem?

  ·         You receive an error message?

  ·         What version of windows operating system is installed on the computer?

  I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Microsoft.com/kb/838398

  Method 2: Try to change the mouse settings. See the article.

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

• Microsoft Mobile Mouse 3000 does not

  I have a relatively new Microsoft Mobile Mouse 3000 which has just stopped working. The mouse has functioned well for three months. I just changed the battery in the mouse. I plugged the transmitter into the USB port after starting my laptop. Normally, there is a green light that turns on the top of the transmitter. Now there is no light and I get an error message on the display, indicating that the USB device is not recognized and that the unit is defective.

  Help, please.

  Hi RJ Moy.

  Thank you for using answers Forum.

  I found an article that can help you solve this problem:

  http://support.Microsoft.com/kb/315973

  Follow the troubleshooting steps if you want and let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lose the Microsoft optical mouse settings

  Whenever I have reset my computer my mouse wheel to reset to 15 lines/click. I can't imagine that so many users want so high that it become the default, but what I can do to get the system of remember I want the value 1?

  It's a Microsoft Optical mouse.  In addition, a person will have to tell me how to learn more on this subject.  (Yes, I'm clicking on apply and exit properly...)

  I swapped the Microsoft mouse for some orphan one from the bottom of a pile of parts.
  It works very well.

  I am also very happy to get rid of the incredibly bad design from a mouse that has button fronts that record a click when it comes in contact with a corner of the keyboard.

• Miscrosft Optical Mouse 3000 - rubber sticky?

  Hey guys,.

  If the rubber on my optical mouse 3000 has become really sticky after a little over a year of occasional use.

  Fortunately, I bought 2 at the time (1 for my laptop) and another for another computer that I end up using so I decided replace the sticky with a new one.

  Well, it turns out, the new brand is slightly sticky as well.

  Is there a way to remove this rigidity? I would like to ask for a replacement, but since has been more than a year, it is out of warranty.

  Do I have other options?

  Thanks in advance

  YT

  The adhesive can usually be removed with solvent for nail polish (acetone)

• Microsoft comfort optical mouse 3000

  Is it possible to open and clean the inside of this mouse? A drink was spilled on it and the left clicker sticks...

  Hi Izzy_dead,

  Thanks for posting answers.microsoft.com

  If you open the mouse, I'm not sure you'd be able to get the equipment working again.    If you open the mouse with a small screwdriver and use a q-tip with possibly a liquid cleaning on tiptoe, you won't might be able to get the mouse working again after the back together.  The mouse is an optical mouse and the chances are that the drink that spread on the mouse caused the sensor do fail or show signs of failure.  It might be the mouse is already a failure and cleanup would not solve the problem, it could try to clean the mouse would be the only option other then buy a different mouse.  The sensors are the question dispute you, it is the Commission circuit unlike ps2 mice who have been able to open and clean the dust easily of.

  Let us know if you would like more information.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 install "Microsoft Optical Mouse" driver each computer startup

  I have a mouse Microsoft Optical USB, P/N: MICROSOFT X 08-71118. Windows 7 installs the driver every time that the computer starts. When I try to install a Microsoft driver, it is said the driver already installed is newer that the one will be installed. I don't understand the mouse is actually by Microsoft and it does not work with Windows 7. Help, please.

  Thank you

  Hello

  -Were there any changes made to the computer before the show?

  -What is the brand and model of the mouse?

  -What is the brand and model of the computer?

  I would suggest trying the following steps and check.

  Method 1: Convenience hardware store

  Run the hardware on the computer troubleshooting utility to resolve any hardware related issues.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Uninstall the drivers of the computer mouse.

  a. click Start , type Device Manager in the start search box then press ENTER.

  (b) this will open Device Manager.

  c. navigate to the mouse and pointing device, right click on the device that you see under the mouse and pointing devices and click on Uninstall.

  d. restart the computer

  After the reboot, Windows will automatically try to download and install the latest drivers for the mouse. If that fails, then download the latest drivers from the mouse on the computer manufacturer site.

  For reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know the results.

• My Notebook Optical Mouse 3000 is not recognized.

  My mouse worked properly today, but later is no longer is recognized. I have tried all usb ports, reinstalled the software, download the new drivers from microsoft... None of the time worked. The lights are flashing, but it doesn´t work.

  Someone has an idea?

  PS: Footstool of Windows 7.

  Hello

  You did some of them however here is just in case troubleshooting tool.

  -------------

  You need get the latest mouse drivers and make them ready to re - install (perhaps several times).

  Download - SAVE - go to where you put them - when ready Right Click on - RUN as admin.

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you
  he find the RIGHT CLICK and uninstall them all. The device is your mouse or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  Try to install your mouse like new.

  Software MS - is of latest version 8.x, which just came out
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a)
  powered hub)

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your
  computer, as well as all USB devices that you previously used. Run Options and check
  the 1st three choices to see if there are here. Try to remove all instances and restart
  then plug in the mouse.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Again try to install your mouse like new.

  ===============================

  If nothing works:

  Notebook Optical 3000 has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=064

  Warranty
  http://www.Microsoft.com/hardware/warranties.mspx

  Claims of Microsoft Hardware

  Supported MS material and warranty claims & Tech Support 1-800-936-5700 for MS
  Material. They will replace the mouse if it cannot be implemented properly if it is still
  under the guarantee. Mouse has 90 days tech support from the date of the 1st incident which should
  say that it will cost you nothing (except if you called the mouse in the past).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.